Skip to content
GullySales

Genetic and speciality testing labs · Follow up systems

Ask the doctor how the first sample went before the second one is sent elsewhere.

A follow-up system for a speciality lab is the routine that contacts a doctor after an introduction, a first sample, a query or a conference meeting. It is how a trial becomes a habit. GullySales designs the routine and the reminders, and your team carries them out.

Scope, fee, reporting and term are agreed in writing after we have read your brief and spoken to you.

A laboratory technologist organises specimen tubes beside a microscope

What follow up systems means

A follow-up system is the set routine for calling, messaging or emailing an enquiry more than once, since most buyers do not decide on the first conversation. GullySales sets the number and timing of follow-ups so an undecided buyer keeps hearing from you until they decide either way.

Last updated 14 Nov 2026. Rules for this trade differ by state and professional body, and they change. We describe restrictions in general terms, so check the current position with your own council or adviser before you publish anything.

For genetic and speciality testing labs

Where it usually goes wrong, and what we would do.

  • “A first sample is a trial, and the doctor is watching”

    The doctor notes whether the pick-up was on time, whether the report was clear and whether anyone called afterwards. Silence after the report reads as indifference.

  • “A lost or delayed sample needs a call from you”

    If the doctor learns of a problem from the patient, the damage is done. A call from the lab before the doctor asks turns a failure into evidence of reliability.

  • “A result query asks for one named voice”

    A clinician who rings about an unusual finding wants the same scientist each time. Rotating answers weaken confidence, so route queries to a named person and log the reply.

  • “A quiet account is a warning, not a rest”

    A doctor who sent samples regularly and then stopped has moved elsewhere or been unhappy. A reminder when the usual gap passes prompts a call before the account is lost.

What we do

What we deliver for genetic and speciality testing labs.

The work available for this need. We agree the deliverables and responsibilities for your engagement in writing.

  1. A first-sample check-in

    A short call or message after the first report, asking about pick-up, report clarity and what would help.

    Result: Every new doctor is asked how it went.

  2. A sample-problem protocol

    Steps for the lab to inform the doctor when a sample is delayed, damaged or queried, with wording prepared in advance.

    Result: The doctor hears from you first.

  3. A named query contact and log

    One scientist or officer per speciality who answers result questions, with replies recorded.

    Result: Answers stay consistent from one call to the next.

  4. A quiet-account reminder

    A prompt in your record when a regular sender has not sent a sample for longer than their usual gap.

    Result: Lapsing accounts are noticed while they can still be recovered.

  5. An event follow-up sequence

    A set of messages for every contact met at a conference, each tied to what they asked.

    Result: Event contacts are answered, not forgotten.

How the result is measured

  • Follow-up completion rate
  • Average number of follow-ups before close
  • Enquiries closed after repeat follow-up

Recorded as a baseline before work starts, so every later report has an honest comparison.

What to capture or send

Moments with a doctor that deserve a call or note.

First sample received
A call from the account owner confirming receipt and the report date the lab's system gives. It lets the doctor know the sample arrived.
Sample problem found
An immediate call stating what happened and what the lab will do. Silence after a lost or delayed sample ends the account.
Report query raised
A named contact acknowledges, answers and logs the query. One voice avoids three different answers.
Quiet account
A reminder to the account owner when a doctor who sent samples stops. It prompts a visit, not a mass message.
After an event
A short note to each contact within the conversation they had, with the guide they asked for.

Who it is for

This is written for these genetic and speciality testing labs.

  • Genetic and molecular testing labs
  • Oncology and histopathology reference labs
  • Fertility and prenatal genetics labs
  • Microbiology and infectious disease reference labs
  • Immunology and allergy testing labs
  • Newborn and metabolic screening labs

Before you decide

When this may not be the right fit.

  • No one owns the first-sample check-in, so it would be skipped.
  • The lab has no process to tell a doctor about a delayed sample.
  • The plan is a mass message to every doctor in the city.

Before you decide

Agree the work. Know how to judge it.

Follow-up systems for genetic and speciality labs: use these checks to prepare, choose the scope, and review what changes.

Bring the right evidence

Trace recent enquiries from arrival to the last recorded action. Include a won enquiry, an unsuitable one, and one that went quiet, with personal details removed for the initial discussion.

Make the scope clear

Agree who accepts each enquiry, what makes it qualified, and how ownership changes. Include a rule for missed replies and a clear reason for closing an enquiry.

Check the work in use

Pick an enquiry at random and ask the team to find its owner, latest conversation, and next action. Check that the record agrees with what actually happened.

Know when to change course

If no one has capacity to respond, assign that responsibility before buying more leads. Automation can support the owner, but it cannot replace an unresolved handover.

These are discussion points, not a fixed package. GullySales confirms the deliverables, responsibilities, fee, and term in writing after reading your brief and speaking with you.

Before we start

What to have ready before the work starts.

The records, access and decisions this work needs from genetic and speciality testing labs. Anything missing is noted in the written scope, with who will supply it.

Sample register with dates and sender
We need to see who sent a first sample, when and whether a second followed. Patient details must be removed. Without dates, we cannot find quiet accounts, and the reminder rule is set by judgement alone. Add the date of the last contact with each sender, even if approximate, since quiet accounts are found from that column.
The log of delayed, lost and damaged samples
Bring any record of transport problems and how they were handled. It shows the protocol you need. If no log exists, ask the logistics team to list the last few incidents from memory so the protocol covers real cases. Add what the doctor was told and who told them, because the wording of that call is what the protocol standardises.
Names of the people who answer queries
List the scientists and coordinators who respond to clinical and logistic queries, with back-ups. Without names, a query lands in a shared inbox and the single-voice rule cannot work. Include the out-of-hours arrangement, since a doctor with a delayed sample rings at the end of a clinic.
A conference contact list with notes
Bring the doctors met at past events, with what each asked. The follow-up refers to the conversation. If only business cards exist, we start with a general message and note that it is less effective. Add the topic discussed with each name, so the first message is specific.
A limit on contacts per doctor
Decide how many contacts a doctor may receive across a period before it feels like pestering, and who may override it. Without a limit, representatives and coordinators contact the same busy doctor from several sides.

How it works

How the follow up systems work runs

The work itself, in order. How an engagement starts, from your brief to a written scope, is set out on our method page.

  1. 1

    Read what happened after the last ten first samples

    We take ten recent first samples and trace what followed: was the doctor called, was a report query answered, did a second sample come. You tell us who handled each. What exists afterwards is an honest picture of where follow-up happened by habit and where it was left to chance. We also look at the gap between the first and second sample for each, since that gap is where doctors decide.

  2. 2

    Set the check-in after a doctor's first sample

    We design a short check-in after a first sample reaches the lab: who calls, what is asked and what is recorded. The call asks only about the collection and transport experience, never about the patient. You approve the script. The doctor, who is watching closely, then meets a named person. The person who rings is the same one whose name appears on the collection sheet, so the doctor recognises the voice.

  3. 3

    Write the protocol for a lost or delayed sample

    We draft what the lab does when a sample is damaged, delayed or lost: who rings the doctor first, what is said and how the recollection is arranged. You and your director approve it. The call comes from the lab before the doctor has to ask. The protocol also says what the lab does about the patient, namely nothing directly, because the doctor owns that conversation.

  4. 4

    Name the contact for result queries

    A doctor with a question on a report needs one named voice. We set out who answers, how the question is logged against the account and who in the lab is asked when the answer is clinical. You confirm each name. The log is read when the next sample arrives. Where a clinical answer needs a pathologist or geneticist, the coordinator says so and names who will reply.

  5. 5

    Draft the event follow-up and quiet-account reminder

    We write the sequence sent after a conference meeting, and a reminder that tells the representative when a regular sender has gone quiet. You set the threshold from your own order pattern. A quiet account is treated as a warning to call, not a reason to wait. The sequence refers to the exact topic discussed at the event, taken from the contact sheet.

  6. 6

    Read the routine against the original sample counts

    We compare repeat samples, answered queries and revived accounts with the counts recorded before the work began, using your register. You see which step led to a second order and which doctors still do not reply. We then change a step or its owner.

Where this fits

Three pieces of sales work, in this order.

This work sits inside sales process design, at stage 2, qualification. The audit comes before it, and sales management keeps it running.

  1. Step 1

    Sales audit

    Find where deals are being lost and what to fix first.

    Start here if you cannot say where orders are lost.

  2. Step 2 · you are here

    Sales process design

    One written way to sell, from first enquiry to repeat order.

    Start here if every salesperson sells differently.

  3. Step 3

    Sales management

    A target, a review routine and someone who owns the number.

    Start here if the team has targets and no routine.

Tell us what you need Your brief is read before we call. Scope, fee and term in writing.

FAQ

Questions owners ask before they call.

Not here? More answers, or ask on WhatsApp.

Who does the follow-up, us or you?
Your team does the calls that need a scientist; we design the routine, set the reminders and draft the messages. Where you want us to make the routine calls, we can agree that scope separately.
How do we avoid pestering busy doctors?
Tie every contact to something real: a sample, a query, a new test. Never message just to be seen. A doctor who asked for no calls goes on a do-not-contact note in the record.
Does this need software?
A spreadsheet can start it. A CRM makes reminders automatic and keeps the history together. We suggest the lightest tool that your team will actually keep up.
What if a doctor does not reply to follow-up?
Try a different route, such as the hospital laboratory contact or the person who places the order. Then step back. A busy specialist is reached better by a useful note after a real event than by repeated messages.
Does the lab or the agency make the follow-up calls?
Your team makes the calls, because a doctor wants to speak to someone who knows the lab. We write the scripts, the checklists and the reminders, and we train the people who will use them. If you wish us to make introductory calls, we agree this separately, and the caller says clearly who they represent.
How do we avoid pestering a doctor who is busy?
Set a contact limit and let the doctor choose the channel. A short message that offers one useful thing, such as an updated sample instruction, is better than a general check. We build the reminder to show the last contact, so nobody calls twice in one stretch.
How much does it cost?
There is no price list, because the work differs by business. The fee is scoped after we have read your brief and spoken to you, and put in writing before anything starts, split into our time, your media spend and production.
How long is the contract?
The term is agreed in writing after we have spoken, along with the fee and the reporting. It is never a default twelve months, and renewal is decided on the numbers against the baseline recorded at the start.
How soon will we see results?
It depends on the trade, the channel and what is already in place. After we have read your brief and spoken to you, we say what we would expect to move first and how it will be measured against the baseline. Nothing here is guaranteed.
What do you need from us?
Your brief, and a conversation. After that, access to whatever this work touches, such as your website, your accounts or your enquiry record, and time with the people who handle your enquiries.

Your next practical step

Tell us what you are trying to grow, and we will read it before we call.

Eight short steps, mostly taps. Skip anything you would rather answer on the call.