X-ray centres · CRM
Keep a record of every sending clinic and every batch buyer, not only the patients.
A CRM for an X-ray centre is a simple shared record of the clinics that send patients, the companies that book batches and the enquiries still open. GullySales sets it up in a tool your team will use, and does not store films or reports in it.
Scope, fee, reporting and term are agreed in writing after we have read your brief and spoken to you.

What CRM means
A CRM is the record where every enquiry, call and quote is kept against a customer, replacing separate notebooks, spreadsheets and memory. GullySales sets up or cleans an existing CRM and reports from it by enquiry outcome rather than by activity logged.
Last updated 14 Nov 2026. Rules for this trade differ by state and professional body, and they change. We describe restrictions in general terms, so check the current position with your own council or adviser before you publish anything.
For X-ray centres
Where it usually goes wrong, and what we would do.
“The patients change, but the clinics stay”
An X-ray patient visits once. The orthopaedic clinic that sent them sends again. A record of clinics, with who visited last and what they asked for, is worth more than a record of single visits.
“Batch buyers need a pipeline, not a spreadsheet of quotes”
A company asks for a rate, receives it and goes silent. A record with a status, a next step and a date shows which quotes are still open, and which have quietly gone to another centre.
“Patient data is sensitive and should stay in the billing system”
Films, reports and diagnoses belong in your radiology system. A CRM holds names of organisations, contact persons and notes on relationships. Keeping the two apart protects patients and keeps the CRM simple.
“A tool nobody opens is worse than none”
A system with forty fields is abandoned in a week. A short list of fields that the counter can fill during a busy hour is the one that survives.
What we do
What we deliver for X-ray centres.
The work available for this need. We agree the deliverables and responsibilities for your engagement in writing.
A clinic and chemist register
A list of nearby clinics, physiotherapy centres and pharmacies with the contact person, visit notes and the last time films were sent.
Result: You know which clinics send work and which need a visit.
A batch buyer pipeline
Stages from enquiry to quote to booked to repeat, with an owner and a next date on each company.
Result: No quote sits without a status.
A short enquiry form for the counter
Four or five fields that capture the source, the film type and a contact, filled in during billing.
Result: Walk-in sources are recorded without slowing the line.
Access rules for the team
A note on who may see and edit which records, and a rule against storing films or reports in the CRM.
Result: Patient data stays where it belongs.
A team walkthrough
A guided session for the counter staff and the owner on using the record in daily work.
Result: The people who use it know how.
How the result is measured
- Enquiries logged in the CRM
- Data completeness
- Reports generated from CRM data
Recorded as a baseline before work starts, so every later report has an honest comparison.
Fields worth keeping
Six fields tell the centre who sends work and who has gone quiet.
- Sending clinic and contact person
- Filled by the counter from the request slip; lets the owner see which clinics send films and which have stopped.
- Source of walk-in
- The counter picks clinic, chemist, listing or passer-by, which shows where the centre's effort belongs.
- Batch buyer and decision-maker
- Filled by the owner or manager; ties each batch quote to a named person and a likely decision date.
- Quote sent and next call due
- Entered when the quote leaves; produces the list of calls to make so no batch quote is left alone.
- Consent to message
- Ticked at the counter; decides whether a film-ready message may go to that person on WhatsApp.
Who it is for
This is written for these X-ray centres.
- Neighbourhood digital X-ray centres
- X-ray units beside orthopaedic clinics
- X-ray units in diagnostic centres
- X-ray centres serving factories and offices
- Portable or home X-ray services
- X-ray centres attached to nursing homes
Before you decide
When this may not be the right fit.
- No one on the team will open a tool daily, so a CRM would hold stale clinics and quotes.
- The only record is the billing system and it holds sensitive data; do not copy it into a CRM before access rules are written.
Before you decide
Agree the work. Know how to judge it.
CRM for X-ray centres: use these checks to prepare, choose the scope, and review what changes.
Bring the right evidence
List the records your team uses and show how an enquiry becomes an order today. Bring examples of duplicate entries, missing owners, and reports that require manual correction.
Make the scope clear
Agree the stages, required fields, access roles, and integrations before configuring the system. Separate software subscriptions from setup, data work, and training.
Check the work in use
Ask the people who will use the CRM to complete a real handover and find the next action without help. Check that the management report can be traced back to individual records.
Know when to change course
If the process is unclear, buying a more complex CRM adds more places for confusion. Start with the minimum fields and rules the team can use consistently.
These are discussion points, not a fixed package. GullySales confirms the deliverables, responsibilities, fee, and term in writing after reading your brief and speaking with you.
Before we start
What to have ready before the work starts.
The records, access and decisions this work needs from X-ray centres. Anything missing is noted in the written scope, with who will supply it.
- Your list of clinics and chemists
- Whatever list exists, in a notebook, phone or sheet, with doctor names where known. It is imperfect, and that is acceptable. We clean it with you. Without a list the tool starts empty and the clinic register is built only from new referrals.
- Past batch quotes with their outcome
- The companies and schools you quoted, with whether they booked. A sheet or a message thread will do. These make the first pipeline. When they are missing, the pipeline begins with the next enquiry and the lost ones are never learned from.
- The name of the tool owner
- One person who decides on fields and stages and can say no to additions. A tool owned by everybody fills with half-used fields. Without an owner, the tool drifts and staff return to the notebook.
- A billing-system boundary in writing
- Tell us which patient data lives in the billing or reporting system and must stay there. We keep it out of the tool by design. If the boundary is unclear, we exclude patient names altogether, which is safe but means the counter writes less.
- Time at the counter for the walkthrough
- The staff who will use the tool need a short slot at a quiet moment to try it on real enquiries. Training done by email does not stick. Without that slot, the tool is switched on but not used.
How it works
How the CRM work runs
The work itself, in order. How an engagement starts, from your brief to a written scope, is set out on our method page.
- 1
Trace how a clinic becomes a regular
We ask you to walk us through the last clinic that began sending patients regularly, from the first call to the first named referral. Then we do the same for the last company that booked a batch. The two stories show the stages your own sales actually passes through. What exists afterwards is a short written journey for each source, which becomes the stages of the record.
- 2
Choose the fields the counter will fill
You and the receptionist decide which facts are worth writing down: clinic name, doctor, how they were found, quote status, next call. We keep every field to what staff already note. Patient names and reports do not enter the tool. The approved field list is short enough that a busy counter can complete it without leaving a patient waiting.
- 3
Connect the form at the counter
We add a short enquiry form to the counter's routine, on a phone or screen the receptionist already uses, and link it to the tool so a clinic call or company message lands as a record. You decide which source labels appear in the drop-down list. We try it on a few real enquiries and check each record is complete. What exists afterwards is a counter form that fills the pipeline without extra typing.
- 4
Load a copy before anyone depends on it
We set up the tool with a copy of your clinic and chemist list and the batch quotes, in a trial space apart from the live counter. You look for wrong names, doubles and missing contacts. Staff try it for a few real enquiries. You decide whether the stages and fields match how the centre works, and we adjust before the real list is moved.
- 5
Test the rules for who sees what
We log in as the receptionist, the technician and the owner and check what each can open, change or export. The owner decides who may see batch prices and who may edit the clinic list. We also check that nothing from the billing system or the reports is copied across. What exists afterwards is a written list of access rules the team has seen.
- 6
Hand the tool to the team and read it
We sit with the staff for their first real day on it, then leave a one-page guide. After the team has used it, we compare its record with the starting list of clinics and quotes: how many referring clinics are active, how many quotes have a next step. You name the person who owns the tool, and any change to the stages goes through them.
Where this fits
Three pieces of sales work, in this order.
This work sits inside sales management. A target, a review routine and someone who owns the number.
Step 1
Sales audit
Find where deals are being lost and what to fix first.
Start here if you cannot say where orders are lost.
Step 2
Sales process design
One written way to sell, from first enquiry to repeat order.
Start here if every salesperson sells differently.
Step 3 · you are here
Sales management
A target, a review routine and someone who owns the number.
Start here if the team has targets and no routine.
FAQ
Questions owners ask before they call.
Not here? More answers, or ask on WhatsApp.
Which CRM tool should we use?
Can the CRM hold patient reports?
Can patient names go into the CRM?
How do we handle a clinic that stops sending patients?
Can we use the billing software as the CRM?
Who enters the data when the counter is busy?
How much does it cost?
How long is the contract?
How soon will we see results?
Who will actually do the work?
More for X-ray centres
Related work to consider.
Closest to this: leads and follow-up
Also for X-ray centres
Or start from the overview: sales and marketing for X-ray centres.
Your next practical step
Tell us what you are trying to grow, and we will read it before we call.
Eight short steps, mostly taps. Skip anything you would rather answer on the call.
