Skip to content
GullySales

Carpenters · CRM

Keep every enquiry, measure visit and quote in one place instead of in your head.

A CRM for a carpenter is a simple record of each enquiry, the visit, the quote and the order, so no job depends on memory. GullySales sets up a record that fits a workshop, from a shared sheet to a lightweight app, and teaches your team to keep it.

Scope, fee, reporting and term are agreed in writing after we have read your brief and spoken to you.

Furniture makers review wooden panels and cabinet assemblies

What CRM means

A CRM is the record where every enquiry, call and quote is kept against a customer, replacing separate notebooks, spreadsheets and memory. GullySales sets up or cleans an existing CRM and reports from it by enquiry outcome rather than by activity logged.

Last updated 14 Nov 2026.

For carpenters

Where it usually goes wrong, and what we would do.

  • “A quote sent is not a job won”

    Quotes go out after a measure visit and then silence follows. Without a record of who was sent what and when, nobody knows who to call. The job goes to the carpenter who followed up.

  • “The workshop and the site need the same facts”

    The person measuring and the person building must see the same dimensions, board and finish. When these live in different notebooks, a wardrobe is built to the wrong size. A shared record removes the gap. A single shared record removes the gap between the visit and the bench.

  • “Past customers are an asset you cannot see”

    A family served three years ago may need a kitchen now. If their job is written in a drawer, you will not think of them. A record of each job and date lets you contact them at the right time.

What we do

What we deliver for carpenters.

The work available for this need. We agree the deliverables and responsibilities for your engagement in writing.

  1. An enquiry and order record

    A sheet or simple tool listing name, source, job, visit date, quote, status and next step.

    Result: Every enquiry has a status and a next step.

  2. Stages that match your work

    Stages such as enquiry, measure visit, quote sent, advance received, in workshop, delivered and fitted.

    Result: You see at a glance where each job stands.

  3. A shared view for site and workshop

    Dimensions, materials and finish stored with each order so the person building sees what the person measuring wrote.

    Result: One record holds the facts for both teams.

  4. A past customer list

    Each family served with the job, the date and a note on what they might need next.

    Result: A list you can filter for people due a call.

  5. Training for your people

    A short guide for whoever answers calls, so they enter each enquiry the same way.

    Result: Everyone records an enquiry in the same format.

How the result is measured

  • Enquiries logged in the CRM
  • Data completeness
  • Reports generated from CRM data

Recorded as a baseline before work starts, so every later report has an honest comparison.

Fields worth keeping

Six facts per job keep the workshop and the site agreeing with each other.

Site address and floor
Entered at the first call by whoever answers; the measure visit and the delivery both need it.
Measure visit date and drawing version
Entered by the carpenter after the visit, so a changed drawing does not turn into a dispute.
Material and finish agreed
Filled by the carpenter when the quote is accepted; settles questions at delivery.
Advance received and balance due
Filled by whoever takes the money, so nobody asks twice or forgets what is owed.
Reason to call again
A new room, a polish that will be due or a relative's wedding, noted at handover for a later message.

Who it is for

This is written for these carpenters.

  • Home carpenters making wardrobes, beds and storage units
  • Modular kitchen and wardrobe fitters
  • Furniture makers with a small workshop
  • Door, window and frame carpenters
  • Repair and polishing specialists for old furniture
  • Carpenters working under interior designers on fit-outs
  • Shop and office fixture carpenters
  • Custom and carved wood furniture makers

Before you decide

When this may not be the right fit.

  • You take only a few jobs and know every one by heart, so a notebook still does the work.
  • Your helpers will not enter anything, and a record only you can see does not help the workshop.

Before you decide

Agree the work. Know how to judge it.

CRM for carpenters: use these checks to prepare, choose the scope, and review what changes.

Bring the right evidence

List the records your team uses and show how an enquiry becomes an order today. Bring examples of duplicate entries, missing owners, and reports that require manual correction.

Make the scope clear

Agree the stages, required fields, access roles, and integrations before configuring the system. Separate software subscriptions from setup, data work, and training.

Check the work in use

Ask the people who will use the CRM to complete a real handover and find the next action without help. Check that the management report can be traced back to individual records.

Know when to change course

If the process is unclear, buying a more complex CRM adds more places for confusion. Start with the minimum fields and rules the team can use consistently.

These are discussion points, not a fixed package. GullySales confirms the deliverables, responsibilities, fee, and term in writing after reading your brief and speaking with you.

Before we start

What to have ready before the work starts.

The records, access and decisions this work needs from carpenters. Anything missing is noted in the written scope, with who will supply it.

Your existing notebook, sheet or WhatsApp lists
Bring whatever you use now: a diary, a spreadsheet, saved chats. We use it to move open jobs into the record so that nothing in hand is lost on the day of the switch. If nothing is written anywhere, we begin from the jobs in progress and rebuild the history from your quote files.
A list of open quotes with their dates
Write each quote still waiting for an answer, the customer by first name only, and when it was sent. These are the first entries and the first follow-ups. If they are missing, they are forgotten at the exact moment the record begins, and the stage counts will look smaller than the truth.
The people who will type into it
Name those who will enter data, whether you, a partner or the site supervisor, and say what phone or computer each will use. A record kept by one person who is away becomes stale within days, so we plan around the real keepers and make sure each has a login of their own.
A decision on sheet or app
Choose between a shared sheet and a light CRM app, knowing the sheet costs nothing and the app adds reminders and a phone view. We explain both on your own phone. If you cannot decide, we start with the sheet and move later, once the habit of recording is firm and the stages have settled.
Rules for how the advance is written
Decide who records the advance, in which field, and who may see the amount. This is a trust matter inside the workshop and sometimes inside the family. Left undecided, two people write it two ways and the record cannot be relied on when a customer disputes what was paid and when.

How it works

How the CRM work runs

The work itself, in order. How an engagement starts, from your brief to a written scope, is set out on our method page.

  1. 1

    Walk the path from enquiry to handover

    We sit with you and trace one recent job from the first call to the final handover: who spoke to the customer, who measured, who drew, who sent the quote, who took the advance and who fitted. Each hand-off is a place where a note can be lost, and each becomes a stage in the record you will keep.

  2. 2

    Agree the stages and the fields to keep

    From that walk we propose a few stages, such as measure booked, drawing sent, quote sent, advance received, in production and fitted. You approve the names. We keep the fields to what you will really type: the job type, the area, the source and the next date. Every extra field is a reason for the record to go stale.

  3. 3

    Build a test copy with five old jobs

    We set up the record, as a shared sheet or a light app you choose, and enter five past jobs of different kinds. You and your site supervisor look at it together and say what is missing or confusing. Changes are made before a real customer appears in it, so mistakes happen on old jobs and not on live orders.

  4. 4

    Connect the enquiry channels to the record

    We link the places where enquiries arrive, such as the form, WhatsApp and calls, so each new one can be entered with its source. We check that a message from a designer is tagged differently from a walk-in. Anything that would double-enter a name is corrected, and a missing source is flagged to the person who typed it.

  5. 5

    Have your team enter real jobs while we watch

    Your people use the record for live enquiries while we sit nearby. Anyone who finds a field awkward says so, and we change it on the spot. The aim is a record that the workshop and the site team can both read without a phone call, so the person at the saw knows what the person on site promised.

  6. 6

    Switch over and read orders against the baseline

    Once the team is entering jobs on time, the old notebook is closed. We compare the number of quotes sent, advances received and jobs fitted with the figures noted before the switch, and you decide which stage or field needs changing. A stage nobody uses is merged with its neighbour so the record stays short.

Where this fits

Three pieces of sales work, in this order.

This work sits inside sales management. A target, a review routine and someone who owns the number.

  1. Step 1

    Sales audit

    Find where deals are being lost and what to fix first.

    Start here if you cannot say where orders are lost.

  2. Step 2

    Sales process design

    One written way to sell, from first enquiry to repeat order.

    Start here if every salesperson sells differently.

  3. Step 3 · you are here

    Sales management

    A target, a review routine and someone who owns the number.

    Start here if the team has targets and no routine.

Tell us what you need Your brief is read before we call. Scope, fee and term in writing.

FAQ

Questions owners ask before they call.

Not here? More answers, or ask on WhatsApp.

Do I need paid software?
Not at the start. A well-built sheet works for a small workshop. We move to a dedicated tool when the volume of jobs makes the sheet slow. Dedicated tools can wait.
My team does not like paperwork. Will they use it?
Only if it is short. We keep the record to the few facts that matter and build it around the phone, so entering a job takes a minute. Short records are the ones that get kept.
Is customer information safe in a CRM?
Keep only what you need, limit who can open it, and choose a tool with proper access control. We set this up with you and note what each person can see.
How do I record the advance without making customers nervous?
Write the amount and what it buys, such as board purchase, on the receipt and in the record. Customers fear paying an advance for work not started, so showing where it goes calms them. Send them a copy of the entry on WhatsApp.
Can my site supervisor update the record from the site?
Yes, if the record lives on a phone-friendly sheet or app. The supervisor can note that a measurement is done, a drawing is approved or a fitting is finished, with a photograph if wanted. We keep the fields few so that an entry takes a minute, even with dusty hands. We also agree what the supervisor may change and what only you may edit, such as the price and the advance. After a short test on one live site, you will see whether the arrangement works or whether a voice note passed to the office is simpler for your team.
What happens to my records if I stop using your help?
They stay with you. The sheet or app is in your name, on your account, and you can copy or export everything at any time. We do not hold your customer list. At the end of the setup we show you how to export it and where the passwords are written, so a change of staff or of advisers does not stop the workshop. We also write a one-page note on how the stages work, so that a new person can learn the record in an afternoon without our presence or a long training.
How much does it cost?
There is no price list, because the work differs by business. The fee is scoped after we have read your brief and spoken to you, and put in writing before anything starts, split into our time, your media spend and production.
How long is the contract?
The term is agreed in writing after we have spoken, along with the fee and the reporting. It is never a default twelve months, and renewal is decided on the numbers against the baseline recorded at the start.
How soon will we see results?
It depends on the trade, the channel and what is already in place. After we have read your brief and spoken to you, we say what we would expect to move first and how it will be measured against the baseline. Nothing here is guaranteed.
Who will actually do the work?
The person you speak to before anything starts. We work from one office in Nagarbhavi, Bengaluru, with no account managers in between.

Your next practical step

Tell us what you are trying to grow, and we will read it before we call.

Eight short steps, mostly taps. Skip anything you would rather answer on the call.