Skip to content
GullySales

Electrical contractors · Capability statement writing

Show the consultant your licence, your work and your approvals in one read.

A capability statement for an electrical contractor is a short supplier document that names your licence class, the kinds of electrical work you carry out and the completed projects you can prove. GullySales writes it from your licence copies, completion letters and inspectorate approvals, and links every claim to a paper you hold.

Scope, fee, reporting and term are agreed in writing after we have read your brief and spoken to you.

Realistic editorial illustration of electrical contractors at work in India

What capability statement writing means

A capability statement is a short document that tells a buyer what your business supplies, what it is registered and certified to do, and which work it can show. GullySales writes the statement from your records, checks every line against evidence you hold, and hands over the text, a facts sheet and a short version for forms.

Last updated 14 Nov 2026.

For electrical contractors

Where it usually goes wrong, and what we would do.

  • “The licence class is the first filter”

    A consultant or builder checking a shortlist looks at the contractor's licence before anything else, because the class decides which voltage and which size of installation you may lawfully take on. A statement that talks about quality and never states the licence class, its holder and its validity gets set aside. Putting the class, the supervisor's certificate and the licensing authority's reference in the opening block lets the reader tick the first box in seconds.

  • “LT work and HT work are different suppliers to a buyer”

    A builder asking for a low tension wiring package and a factory asking for a substation and transformer yard are looking for different firms. Some contractors do both but describe only one, so the consultant files them under small jobs. The statement has to separate the two kinds of work, name what you have done in each and attach a project line to each, so the reader sees HT experience where it exists.

  • “Inspectorate approval is a deliverable, not a footnote”

    On a building or plant project, the date the installation is inspected and approved decides when the supply connection comes and when the owner can hand over. A contractor who has taken installations through approval without rejection notes holds a real advantage, yet the fact is buried in a completion letter. The statement brings it forward as a plain line: what was approved, for which project and under which authority, with the paper behind it.

  • “The same firm answers a builder, a plant and a tender differently”

    A builder wants to know about site capacity and handover. A plant head wants shutdown work done around a running shift. A public tender wants registration and a past order list in a set order. One unchanged document answers none of them well. The statement is written as a core text with swappable sections, so each reader sees the proof they came for first and your team stops editing it by hand under deadline.

What we do

What we deliver for electrical contractors.

The work available for this need. We agree the deliverables and responsibilities for your engagement in writing.

  1. Requirements read-through for the buyer

    A written note on what the builder, consultant, plant or tender asks a contractor to show, which parts are compulsory and which claims in your material have no paper behind them yet. You see the gaps in licence, certificate or project record before a word of the statement is drafted, and you decide whether to close them.

    Result: You can read a list of the papers still missing against each requirement.

  2. Core capability statement

    The full text in the order a reviewer scans: what you install, which voltage classes your licence covers, how you run a site, the work you can show and the contact for estimates. Each paragraph states a fact in plain words, with no praise standing in for evidence.

    Result: Every paragraph can be read aloud to a consultant without an adjective carrying the point.

  3. Project line for each type of work

    Short entries for the installations you can name: building services, factory power, substation work, maintenance contracts. Each entry gives the kind of site, the scope you carried out and the paper that supports it, such as a completion letter or an approval note.

    Result: Each project entry points to one document in your file.

  4. Licence, approvals and registrations block

    A fixed block that sets out your licence class, supervisor and worker certificates, inspectorate approvals and any supplier registrations, in the order a vendor desk checks them. Holder names and validity are copied from your documents, and a flag marks anything that is near expiry.

    Result: Names and validity on the block match the scanned papers line for line.

  5. Evidence map

    A table tying each claim in the statement to the licence copy, completion letter, drawing set or reference contact that supports it. You approve the text claim by claim against the table, and the table travels with the file for a reviewer who asks.

    Result: No claim in the statement is missing from the evidence map.

  6. Short version for forms and portals

    A shorter text for vendor registration forms and bid portals that allow a limited number of characters, written to the platform's current specification. It carries the same facts as the core statement, so a form answer never contradicts the document attached beside it.

    Result: The short text fits the form's field and says nothing the full statement does not.

How the result is measured

  • Forms and tenders that were submitted with the statement attached
  • Supplier registrations completed without a request for missing papers
  • Buyer queries asking what you supply, counted in your enquiry log

Recorded as a baseline before work starts, so every later report has an honest comparison.

Who it is for

This is written for these electrical contractors.

  • Licensed contractors for residential and apartment projects
  • Commercial and office fit-out electrical contractors
  • Industrial and factory electrical contractors
  • HT, substation and transformer installation contractors
  • Government and PWD enlisted electrical contractors
  • Electrical maintenance and AMC providers for apartments and buildings
  • Villa and home rewiring specialists
  • Solar, EV charger and DG set installation contractors

Before you decide

Agree the work. Know how to judge it.

Capability statement writing for electrical contractors: use these checks to prepare, choose the scope, and review what changes.

Bring the right evidence

Bring real questions, objections, and call examples that the team finds difficult. Agree which selling behaviour needs to change and how it will be observed at work.

Make the scope clear

Choose the roles and situations to practise. Separate a training session from coaching, manager follow-up, and any scripts or reference material to be produced.

Check the work in use

Use a realistic practice conversation, then review the same skill in live work with appropriate permission. Look for a change in behaviour before attributing a sales result to training.

Know when to change course

If the problem is an unclear offer, missing product knowledge, or no permission to make a decision, fix that first. A communication workshop cannot remove those barriers.

These are discussion points, not a fixed package. GullySales confirms the deliverables, responsibilities, fee, and term in writing after reading your brief and speaking with you.

Before we start

What to have ready before the work starts.

The records, access and decisions this work needs from electrical contractors. Anything missing is noted in the written scope, with who will supply it.

Licence and certificate copies
Your contractor licence, the supervisor and wireman certificates of the people named, and any registration with a supplier panel. The statement leads with these, so a missing or lapsed paper is found and flagged now, not by a vendor desk after the document has gone out.
Completion letters and approval notes
Letters from builders or plant heads confirming finished work, and the inspectorate's approval for installations you took through inspection. These turn a project line from a claim into a record. Without them we can only describe the work in general terms, which a buyer scores lower.
A list of finished projects
A plain list of installations with the site type, the scope you carried out and the person who would confirm it. We do not need every job. We need the ones that show the kind of work you want more of, such as a transformer yard or a hospital block.
The tender or form you must answer
The actual pre-qualification sheet, vendor form or builder's request, if one exists. It tells us what the reviewer scores and how much space each answer gets. If none exists, tell us which buyer you are aiming at and we write the core text for that reader.
Someone to confirm facts and approve
The licence holder or senior site lead who can say what you did on each project and who signs off the final text. Capability statements go wrong when no one with site knowledge reads them, and a statement nobody can stand behind weakens the next reference call.

How it works

How the capability statement writing work runs

The work itself, in order. How an engagement starts, from your brief to a written scope, is set out on our method page.

  1. 1

    Collect the licence and project papers

    We begin with what you hold: licence copies, supervisor certificates, completion letters, approval notes from the inspectorate, work orders and the names on them. You send what exists, even if untidy. We list each document, note its holder name and validity, and mark any that is missing or has lapsed, so the statement is built on paper rather than memory.

  2. 2

    Read the buyer's own requirement

    Next we read the form, tender clause or builder's request the statement is meant to answer. A consultant's pre-qualification sheet asks for different proof from a factory's vendor form. We note which sections are mandatory, which fields have limits and which evidence the reviewer will score, then agree with you which buyer type this version serves first.

  3. 3

    Sort the work into LT, HT and maintenance

    We go through your completed jobs with you and sort them by the kind of work: wiring and distribution, panels, substation and transformer work, rewiring, maintenance contracts. The sort decides which projects open each section. A contractor with real HT work stops being read as a small-job firm because the work is shown under its own heading.

  4. 4

    Draft the statement against the evidence

    We write the opening, the capability list, the delivery approach and the project entries, and tie each claim to a document in the evidence map. Where a sentence cannot be supported we cut it or ask you for the paper. The draft is plain, specific to your licence and projects, and avoids the stock phrases every contractor's brochure shares.

  5. 5

    Check it with your site lead and licence holder

    The person who runs sites and the person who holds the licence read the draft line by line. They correct scope, site names and the way each installation is described, and confirm that approvals and certificates are stated as they are on paper. Anything they would not say aloud to a consultant is removed before the text is final.

  6. 6

    Read the result against your earlier figures

    Before the work began we recorded how many pre-qualification forms and builder requests asked for a supplier summary, and how you answered each. After the statement is in use we read the new replies against that record: which buyers asked for more papers, which accepted it as sent. The record shows what to revise next.

Where this fits

Three pieces of sales work, in this order.

This work sits inside sales process design, at stage 1, prospecting and lead generation. The audit comes before it, and sales management keeps it running.

  1. Step 1

    Sales audit

    Find where deals are being lost and what to fix first.

    Start here if you cannot say where orders are lost.

  2. Step 2 · you are here

    Sales process design

    One written way to sell, from first enquiry to repeat order.

    Start here if every salesperson sells differently.

  3. Step 3

    Sales management

    A target, a review routine and someone who owns the number.

    Start here if the team has targets and no routine.

Tell us what you need Your brief is read before we call. Scope, fee and term in writing.

FAQ

Questions owners ask before they call.

Not here? More answers, or ask on WhatsApp.

What is a capability statement for an electrical contractor?
It is a short supplier document that states your licence class, the kinds of electrical work you carry out, the approvals you have taken installations through and the projects you can show. A consultant, builder or tender desk reads it to decide whether to invite you to price. It is written for one reader scanning a shortlist, not for a homeowner.
How is it different from a company profile or a brochure?
A profile tells the story of the firm and a brochure sells to a homeowner. A capability statement is shorter and answers the questions a supplier desk asks: what do you install, what are you licensed for and where is the proof. Each claim carries a document, so a reviewer can verify it.
Do I need one if I already send my BOQ rates?
Your rates answer the price question; the statement answers whether you are a safe firm to give the package to. Consultants and builders compare both. A priced estimate with a clear statement attached reads as a supplier who has done this before, and the statement can sit in the pre-qualification stage before any BOQ arrives.
Can you write the HT and substation work up if our paperwork is thin?
We can write only what your papers support. If an approval note or completion letter for HT work is missing, we mark the gap and ask whether you can obtain it from the client or inspectorate. We will not describe work you cannot document, because an unsupported line makes a reviewer doubt the true ones.
Will the statement mention our safety record or insurance?
Only if you hold documents for them and want them stated. Safety records, insurance cover and site training belong in a statement when a buyer's form asks for them. We write the line from your papers and leave out anything you cannot show, since a figure with no record behind it counts against you.
Who submits it and who holds the login to the portals?
You do. GullySales prepares the text and the short version, and you or your authorised person uploads it, signs where a declaration is needed and keeps the portal login. Licences and statutory filings stay with you and your own adviser, and we check the platform's current rules before preparing any text for it.
How much does it cost?
There is no price list, because the work differs by business. The fee is scoped after we have read your brief and spoken to you, and put in writing before anything starts, split into our time, your media spend and production.
How soon will we see results?
It depends on the trade, the channel and what is already in place. After we have read your brief and spoken to you, we say what we would expect to move first and how it will be measured against the baseline. Nothing here is guaranteed.
Who will actually do the work?
The person you speak to before anything starts. We work from one office in Nagarbhavi, Bengaluru, with no account managers in between.
What do you need from us?
Your brief, and a conversation. After that, access to whatever this work touches, such as your website, your accounts or your enquiry record, and time with the people who handle your enquiries.

Your next practical step

Tell us what you are trying to grow, and we will read it before we call.

Eight short steps, mostly taps. Skip anything you would rather answer on the call.