Skip to content
GullySales

Industrial machinery distributors · Industrial distributor dealer sell-through programme

A machine billed to a sub-dealer is not sold until a factory runs it.

For a machinery distributor, sell-through means knowing which sub-dealers turn entry-level machines, spares and consumables into installed machines and repeat orders at a workshop. GullySales ranks your sub-dealers from your billing, builds the visit sheet, scheme record and reorder log, and works through your own field team.

Scope, fee, reporting and term are agreed in writing after we have read your brief and spoken to you.

Realistic editorial illustration of industrial suppliers and distributors at work in the United States

What industrial distributor dealer sell-through programme means

The industrial distributor dealer sell-through programme joins five jobs for a distributor: ranking dealers, checking the counter, tracking schemes, visiting in the field and measuring reorders. GullySales builds the records and the routine with your sales head, and works through your own field team and salespeople.

Last updated 14 Nov 2026.

For industrial machinery distributors

Where it usually goes wrong, and what we would do.

  • “Billing to a sub-dealer is not an installed machine”

    A distributor holds the principal's rights for a territory and appoints sub-dealers in smaller industrial towns for welding sets, compressors, blowers and similar machines. The invoice to the sub-dealer closes the entry in your books. The machine may then stand in the sub-dealer's shop for a long time, or leave for a workshop that never registers the warranty. Until someone checks, billing and installation are treated as the same thing.

  • “Spares and consumables show who is really selling”

    A sub-dealer who sells machines will also be asked for nozzles, filters, belts, seals and oil. Repeat orders for these tell you more than the machine invoice does, because they come only from a workshop that is running the machine. A sub-dealer who orders the machine and never orders spares has either not sold it or lost the customer to another supplier. The reorder log makes that silence visible.

  • “The principal's scheme and your sub-dealer's claim must match”

    Principals announce schemes on particular models, sometimes with a display or demonstration condition attached. A sub-dealer claims against the scheme, your accounts staff check the claim, and the principal settles with you later. When the records do not match, the dispute lands on you. A scheme register that shows which sub-dealer joined, which invoice qualified and which claim is pending protects the relationship on both sides.

  • “Your engineers and your salespeople see different halves”

    A service engineer visiting a workshop sees the old machine, the shop floor and the sub-dealer's name on a sticker. A salesperson visiting the sub-dealer sees the counter and the stock. Neither writes down what the other needs. One shared visit sheet lets the engineer's observations reach the person who plans the next sub-dealer call, and lets a sub-dealer's complaint reach service before the workshop hears of it.

What we do

What we deliver for industrial machinery distributors.

The work available for this need. We agree the deliverables and responsibilities for your engagement in writing.

  1. Sub-dealer register and ranking

    A cleaned list of sub-dealers with the territory, the machine lines bought, spares ordered and credit position taken from your billing. A written scoring rule places each one in an order your sales head can read, challenge and correct with local knowledge of the estate.

    Result: You can open the register and see why one sub-dealer ranks above another.

  2. Sub-dealer visit sheet

    A phone-friendly sheet for stock on the floor, the demonstration machine, the price list in use, competing brands on display and the spares held. Each visit ends with a named action for your salesperson or for service, so a finding does not stay in a notebook.

    Result: Each completed visit carries one written action and the name of the person who owns it.

  3. Demonstration and display material

    Machine charts, model comparison boards and a small display stand for the sub-dealer's counter, within the agreed scope. Artwork follows the principal's brand rules, and both you and the principal approve it before anything is printed or sent.

    Result: No board reaches a sub-dealer without your approval and the principal's on file.

  4. Scheme check record

    A register that matches each principal scheme to the sub-dealers who joined, the invoices that qualified and the claims made. Claims that do not match stay open on the sheet for your accounts staff and your owner to decide, and nothing is released by us.

    Result: Every open scheme claim shows the dealer, the invoice and the person who must decide.

  5. Spares reorder log

    For each sub-dealer, the last order, the spares and consumables bought and the next expected need, with a flag when an expected order has not arrived. The flag becomes a reason to call, not a reason to scold.

    Result: A sub-dealer past the expected reorder point appears on the call list.

  6. Installed-base and sell-through view

    Your billing to each sub-dealer set beside the installations and warranty registrations reported back. Figures supplied by sub-dealers are labelled as reported, estimates are marked as estimates, and checked counts are kept apart from both.

    Result: Every figure in the view is marked as billed, reported, estimated or checked.

How the result is measured

  • Dealer purchases against the agreed baseline
  • Dealers reordering after a visit, kept apart from visits made
  • Scheme claims matched to qualifying invoices

Recorded as a baseline before work starts, so every later report has an honest comparison.

Who it is for

This is written for these industrial machinery distributors.

  • CNC machine tool distributors
  • Compressor, blower and air system dealers
  • Plastic injection moulding and extrusion machine distributors
  • Packaging and filling machine suppliers
  • Welding, cutting and fabrication machinery dealers
  • Textile and garment machinery agents
  • Woodworking and printing machinery distributors
  • Used and refurbished machine traders and spare parts specialists

Before you decide

Agree the work. Know how to judge it.

Industrial distributor dealer sell-through programme for industrial machinery distributors: use these checks to prepare, choose the scope, and review what changes.

Bring the right evidence

Map existing partners, their territories, and the customers they serve. Review active selling and repeat orders separately from the number of partners signed up.

Make the scope clear

Agree partner fit, territory rules, onboarding, and support responsibilities. Clarify how direct enquiries and partner enquiries are assigned before starting recruitment.

Check the work in use

Follow a partner enquiry through to an order and the next purchase. Check whether the partner has the product knowledge and material needed to sell without repeated intervention.

Know when to change course

If current partners cannot sell because supply or support is weak, resolve that before recruiting more. A bigger network can spread the same problem further.

These are discussion points, not a fixed package. GullySales confirms the deliverables, responsibilities, fee, and term in writing after reading your brief and speaking with you.

Before we start

What to have ready before the work starts.

The records, access and decisions this work needs from industrial machinery distributors. Anything missing is noted in the written scope, with who will supply it.

Invoices by sub-dealer
The register and ranking are built from billing, not from impressions. An export from your accounts system is enough, with machine lines and spares shown separately. Without it the baseline is guesswork, and the first ranking cannot be defended to the sub-dealers it places lower.
Principal's scheme terms in writing
The scheme record compares what a sub-dealer was promised with what was claimed. The terms must come from the principal or your owner. Without them the record has nothing to be checked against, and a disputed claim turns into a matter of memory.
A named owner for each sub-dealer
Each sub-dealer needs one person on your team who owns the relationship. Gaps are acceptable if flagged. A sub-dealer with no owner receives no visit and slips out of the reorder log without anyone noticing the silence.
Field time and service engineer notes
Your salespeople need room to complete the sheet, and your service engineers need a way to pass on what they see at workshops. Without set-aside time the records cover only the sub-dealers visited more than others, and the rest stay unmeasured.
A decision on sub-dealer data sharing
Some sub-dealers will not share who bought a machine. Decide what you ask for, such as warranty registration, and what you accept instead. If this is unsettled, visits become arguments about data and the sell-through view stays thin.

How it works

How the industrial distributor dealer sell-through programme work runs

The work itself, in order. How an engagement starts, from your brief to a written scope, is set out on our method page.

  1. 1

    Brief, billing and principal terms

    You send the requirements brief, the sub-dealer billing you can share and the principal's written scheme terms. We agree which brands, territories and sub-dealers the scope covers. The written scope, fee and term follow that conversation, and the principal's rules stay the principal's.

  2. 2

    Sub-dealer baseline from your invoices

    We match the sub-dealer list to your invoices, mark duplicate names and dormant shops, and record a starting point for machines billed and spares ordered. Your sales head confirms it. Gaps are written down as gaps and are not filled with a guess.

  3. 3

    Ranking rule and visit plan

    We propose the scoring rule and a visit plan that fits your salespeople's routes through the industrial estates. Your sales head corrects it, for example where a sub-dealer is held back by supply of a model and not by weak demand. The corrected plan becomes the one in use.

  4. 4

    Sheet, display kit and scheme register

    We prepare the visit sheet, the display material and the scheme register. You and the principal approve every board, chart and claim form before it is printed or shared. Nothing goes to a sub-dealer in the distributor's name without that approval.

  5. 5

    Field routine run by your team

    Your salespeople visit with the sheet and file their notes. We read the notes, pass service complaints to your service head and scheme questions to your accounts staff, and adjust the plan. Visits by GullySales staff are a separate scope agreed in writing.

  6. 6

    Reorder reading against the baseline

    We read the spares reorders and installation reports with your sales head against the starting figures recorded in step two. You decide which sub-dealers get more support, which need a supply fix and which visits to drop. The comparison shows movement; it does not promise it.

Where this fits

Three pieces of sales work, in this order.

This work sits inside sales process design, at stage 1, prospecting and lead generation. The audit comes before it, and sales management keeps it running.

  1. Step 1

    Sales audit

    Find where deals are being lost and what to fix first.

    Start here if you cannot say where orders are lost.

  2. Step 2 · you are here

    Sales process design

    One written way to sell, from first enquiry to repeat order.

    Start here if every salesperson sells differently.

  3. Step 3

    Sales management

    A target, a review routine and someone who owns the number.

    Start here if the team has targets and no routine.

Tell us what you need Your brief is read before we call. Scope, fee and term in writing.

FAQ

Questions owners ask before they call.

Not here? More answers, or ask on WhatsApp.

Does this programme fit a distributor who sells large machines directly to factories?
Only for the part of your business that runs through sub-dealers. A distributor selling lathes and packaging lines straight to plant owners has no sub-dealer counter to check. If you also supply entry-level machines, spares or consumables through smaller dealers in other towns, those relationships are where this programme applies, and we say so in the scope.
How do you tell a sub-dealer who has sold a machine from one who is holding it?
We compare your invoice to the sub-dealer with warranty registrations, spares orders and what your engineers see at the workshop. None of these is proof alone, so each figure is labelled as billed, reported, estimated or checked. Your sales head decides what to treat as sold, and the labels show how firm each number is.
Will the principal accept our display boards and charts?
That is the principal's decision, not ours. We follow the principal's brand rules and send artwork to you first. You send it to the principal if approval is required, and nothing is printed or placed at a sub-dealer until both approvals are on file. If the principal refuses a board, we change it.
Can you release scheme payouts or change sub-dealer margins?
No. Margins, scheme terms and payouts sit with the principal and your owner. The scheme record only shows which sub-dealers joined, which invoices qualified and which claims are open, so your accounts staff can decide with the facts in front of them. We never settle a claim on your behalf.
What if our sub-dealers sell competing brands as well?
The visit sheet records competing machines on display and the spares they carry, which is information your sales head rarely has in writing. It does not stop a sub-dealer from stocking another brand. It shows where your line sits on the counter and which sub-dealers you should speak to about supply or support.
Who visits the sub-dealers?
Your own salespeople do. GullySales prepares the ranking, the sheet and the plan, reads the notes they file and flags what needs a decision. If you want visits by our staff, that is a separate scope agreed in writing, and it is not assumed anywhere in this programme.
How much does it cost?
There is no price list, because the work differs by business. The fee is scoped after we have read your brief and spoken to you, and put in writing before anything starts, split into our time, your media spend and production.
How long is the contract?
The term is agreed in writing after we have spoken, along with the fee and the reporting. It is never a default twelve months, and renewal is decided on the numbers against the baseline recorded at the start.
How soon will we see results?
It depends on the trade, the channel and what is already in place. After we have read your brief and spoken to you, we say what we would expect to move first and how it will be measured against the baseline. Nothing here is guaranteed.
What do you need from us?
Your brief, and a conversation. After that, access to whatever this work touches, such as your website, your accounts or your enquiry record, and time with the people who handle your enquiries.

Your next practical step

Tell us what you are trying to grow, and we will read it before we call.

Eight short steps, mostly taps. Skip anything you would rather answer on the call.