Skip to content
GullySales

Aerospace and defence component manufacturers · Sales process

Lay out the steps from first drawing to first order so nothing waits on memory.

A sales process for an aerospace or defence component maker is the written sequence from enquiry to approved first order: qualify, review the drawing, quote, send a sample, pass the audit, take the order. GullySales writes it down with your team, assigns an owner for each step and sets up the record that tracks it.

Scope, fee, reporting and term are agreed in writing after we have read your brief and spoken to you.

Engineers inspect a machined aerospace component at a CNC workshop

Plan the next part of the work

Last updated 21 Nov 2026.

For aerospace and defence component manufacturers

Where it usually goes wrong, and what we would do.

  • “Every enquiry is handled differently”

    One buyer gets a quote the same day, another waits a fortnight because the drawing needed a question. Nobody has written down which is which.

  • “Quotation is a guess by one person”

    The price comes from the owner's judgement and a sheet of rates. When the owner is away, enquiries wait.

  • “Approval is treated as a separate matter from selling”

    The sample passes, then months go by with no contact. The buyer's attention moves on before the audit is scheduled.

What we do

What we deliver for aerospace and defence component manufacturers.

The work available for this need. We agree the deliverables and responsibilities for your engagement in writing.

  1. A written sale stage list

    Stages from enquiry to first order named in your shop's own words, with the exit test for each stage.

    Result: Everyone describes a deal in the same terms.

  2. A drawing review checklist

    The questions your production and quality heads ask before a price is given: material, tolerance, finish, inspection, quantity.

    Result: A quote is not sent with a hidden problem inside.

  3. A quotation routine

    A costing sheet, a second pair of eyes for new part families, and a standard note of assumptions and validity.

    Result: Prices are consistent and can be explained to the buyer.

  4. A sample and approval plan

    For each buyer, who sends the sample, who follows up, and what is recorded after the audit.

    Result: The approval step is tracked as part of the sale.

  5. A short handover to production

    What sales passes to the planning team once an order arrives: drawing revision, delivery date, special instructions.

    Result: The shop floor does not rediscover the order.

How the result is measured

  • Enquiries with a named owner and next action
  • Opportunities meeting the stage evidence
  • Time waiting at each decision
  • Handovers returned for missing information

Recorded as a baseline before work starts, so every later report has an honest comparison.

Steps of a sale

The steps of a sale for an aerospace or defence component maker, in the shop's own words.

Enquiry received
Record the buyer, the part, the quantity and the drawing status. Acknowledge the enquiry and name the person who will answer.
Drawing review
Production and quality read the drawing together. Note anything that needs a question to the buyer before pricing.
Quotation
State the price basis, the drawing revision, the quantity and the validity period. Keep a copy of the costing in the record.
Sample or first article
Record the date sent, the inspection report issued and who the buyer's contact is. Note what the buyer said when it arrived.
Audit and approval
Log the audit date, the points raised and the closure date for each. An approval that is not chased can wait months.
Order and handover
Write the order number, the revision and the delivery date, and pass them to planning. Note the reason for the win in your own words.

Who it is for

This is written for these aerospace and defence component manufacturers.

  • Machining shops for airframe and engine parts
  • Sheet metal and fabrication units
  • Casting and forging suppliers
  • Special process houses for heat treatment, plating and coating
  • Cable harness and electronics assembly units
  • Fastener and precision turned parts makers
  • Tooling, jigs and fixture makers
  • Defence sub-assembly vendors supplying public sector units

Before you decide

When this may not be the right fit.

  • Only the owner can price a new part, and until someone else can read a drawing and quote it, a written process would still stop at one person.
  • You have not yet decided what a qualified enquiry looks like, so the first step would pass every caller forward.
  • Your approval and audit steps belong to the customer's own system and change by buyer, so you need to list each one before fixing a process.

Before you decide

Agree the work. Know how to judge it.

Sales process for aerospace and defence component manufacturers: use these checks to prepare, choose the scope, and review what changes.

Bring the right evidence

Bring examples of deals that moved forward and deals that stalled. Record what the buyer had actually agreed at each stage rather than relying on the salesperson's confidence.

Make the scope clear

Define the entry and exit rule for each stage, the owner, and the document or decision that moves the deal. Agree how exceptions will be handled before rolling the process out.

Check the work in use

Take a live enquiry through the proposed stages with the team. Two people reviewing the same evidence should place it at the same stage and agree the next action.

Know when to change course

If a stage produces no useful decision or handover, remove it. The process should help someone do the next piece of work, not create administration for its own sake.

These are discussion points, not a fixed package. GullySales confirms the deliverables, responsibilities, fee, and term in writing after reading your brief and speaking with you.

Before we start

What to have ready before the work starts.

The records, access and decisions this work needs from aerospace and defence component manufacturers. Anything missing is noted in the written scope, with who will supply it.

Files for three recent orders
Bring the enquiry, drawing, quote, sample report and approval correspondence for three recent orders. Complete files are best. Without them, the process is described from memory, and the real delays, which sit in the paperwork, never appear. Complete files are best, but missing papers are noted. They show the real delays, which sit in the paperwork and not in the sales call. Without them, the process is described from memory.
The estimator's method of costing
Explain how a quote is built: material, machine time, inspection, finishing and any special process costs, in words. No figures are needed. Without this, the quotation routine is generic, and the first buyer who asks why a quote differs gets no answer. This stays inside the shop and is never published. It lets the quotation routine match how the estimator actually thinks, so the first buyer who asks why a quote differs gets a real answer.
Approval correspondence with buyers
Collect the emails, letters and audit reports that record how buyers approved the shop. They show what each buyer actually required. Without them, the sample and approval plan assumes a single route, while public sector and private buyers follow different ones. Without them, the sample plan assumes a single route, though public sector and private buyers follow different sequences and ask for different papers.
A view of production capacity
Ask the production head for a plain statement of which machines and processes can take new work and which are committed. Without it, the quote stage promises what the shop cannot deliver, and the sales process produces orders the plant has to refuse. A rough statement is enough. Without it, the quote stage can promise what the shop cannot deliver.
The owner's decision on confidentiality terms
Decide when the shop asks a buyer to sign a non-disclosure agreement, and who signs for the shop. A clear line is enough. Without it, every enquiry stalls on that question, and the buyer who wanted a quote waits for an answer nobody can give. Without it, the question stalls each enquiry until someone senior answers it.

How it works

How the sales process work runs

The work itself, in order. How an engagement starts, from your brief to a written scope, is set out on our method page.

  1. 1

    Trace the last orders from first enquiry

    We take the orders won in the last season and trace each from the first enquiry to the order, listing every person who touched it and every wait. You tell us which steps were skipped and which took the longest. The trace shows where the process is really decided, not where the brochure says it is. The trace is shared with the owner as a plain chart.

  2. 2

    Write the stage list with the owners

    Together we set the stages: enquiry, drawing review, quote, sample, audit, first order. Each has an owner, an entry condition and an exit condition. You change the names to match how the shop speaks. The list is one page that every salesperson and estimator can read. Conditions are written as questions that can be answered yes or no.

  3. 3

    Draft the drawing review checklist

    With the estimator and the quality head we write the checks a drawing must pass before a quote: revision, material, tolerances, finish, inspection and quantity. Items that cannot be met are flagged for a call with the buyer. The checklist is used before any price is set. Anything that cannot be met is flagged for a call with the buyer before the quote is priced, so no estimator spends time on a drawing that cannot be made.

  4. 4

    Set the quotation routine

    The estimator, the production head and the owner agree how a quote is built, who checks it and who signs it. A quote that has not passed the routine does not leave the building. We write the steps down and the record holds each quote with its checker. The routine fits on one page and is pinned where the estimator works.

  5. 5

    Plan the sample and first-article approval

    We write what happens after a quote is accepted: the sample, its inspection report, the buyer's audit and the approval. Each step has a named person and a document. You decide what you will agree to and what you will not before a first order is secured. Each document is named so a buyer can ask for it by that name, and the shop knows where it sits in the file.

  6. 6

    Read stage movement against the starting record

    We compare how enquiries moved through the stages with the record taken before the process was written. You tell us where buyers dropped out and why. The stage list is then adjusted, and steps nobody uses are removed. Stages nobody uses are merged. We keep a record of which buyers left at which stage, in plain words, so that the next review has something to compare against, and the owner can see where the shop's attention is needed.

Where this fits

Three pieces of sales work, in this order.

This work sits inside sales process design, at stage 1, prospecting and lead generation. The audit comes before it, and sales management keeps it running.

  1. Step 1

    Sales audit

    Find where deals are being lost and what to fix first.

    Start here if you cannot say where orders are lost.

  2. Step 2 · you are here

    Sales process design

    One written way to sell, from first enquiry to repeat order.

    Start here if every salesperson sells differently.

  3. Step 3

    Sales management

    A target, a review routine and someone who owns the number.

    Start here if the team has targets and no routine.

Tell us what you need Your brief is read before we call. Scope, fee and term in writing.

FAQ

Questions owners ask before they call.

Not here? More answers, or ask on WhatsApp.

Who should do which step?
Sales takes the enquiry and the follow-up; production and quality review the drawing; the owner approves new part families. Write the names against each step so nothing falls between people.
When should we quote?
When the drawing is complete and the review is done. A quick price on an unclear drawing creates trouble later. Reply to the enquiry on the day and say when the quote will follow.
What if the buyer only wants the lowest price?
Ask what the part is for and what the approval route is. A buyer who wants only a price for comparison belongs on a separate list, not on the owner's calendar.
Should we add a step for an NDA?
If your buyer expects one, yes, and place it before the drawing is shared. Have your own adviser review the wording, and record the date it was signed.
How do we handle a buyer who wants a quote without sending a drawing?
Decline the price, and offer a process conversation. A quote without a drawing is a guess, and a guess becomes a promise when the buyer repeats it. The sales process names this as a stage, with a reply that says the shop can only price against a drawing and shows how to send one. A buyer who refuses is rarely one to win. The reply says the shop prices against a drawing, explains what it needs, and offers a call about the process. We write the reply with the estimator so that it sounds helpful and not abrupt.
What if an audit finds a fault after we have quoted?
The process should say what happens before it occurs. The quality head records the fault, agrees a corrective step with the buyer and tells the owner whether the quote still stands. GullySales writes this as a short rule in the stage list, so the salesperson does not improvise. The quote is reviewed if the corrective step changes the cost. If the buyer refuses to adjust, the shop can withdraw the quote, because a price based on a different cost is a guess that someone will hold you to.
How long is the contract?
The term is agreed in writing after we have spoken, along with the fee and the reporting. It is never a default twelve months, and renewal is decided on the numbers against the baseline recorded at the start.
How soon will we see results?
It depends on the trade, the channel and what is already in place. After we have read your brief and spoken to you, we say what we would expect to move first and how it will be measured against the baseline. Nothing here is guaranteed.
Who will actually do the work?
The person you speak to before anything starts. We work from one office in Nagarbhavi, Bengaluru, with no account managers in between.
What do you need from us?
Your brief, and a conversation. After that, access to whatever this work touches, such as your website, your accounts or your enquiry record, and time with the people who handle your enquiries.

Your next practical step

Tell us what you are trying to grow, and we will read it before we call.

Eight short steps, mostly taps. Skip anything you would rather answer on the call.