Skip to content
GullySales

Concrete block manufacturers · CRM

Keep every mason, contractor and site in one record so no repeat order depends on memory.

A CRM for a block yard is a shared record of the masons, contractors, developers and dealers you sell to, with their sites, quantities and last order. GullySales sets up a record your yard will actually use, starting with a sheet and moving to software when the sheet is outgrown.

Scope, fee, reporting and term are agreed in writing after we have read your brief and spoken to you.

A builder and supervisor inspect paving blocks in a materials yard

What CRM means

A CRM is the record where every enquiry, call and quote is kept against a customer, replacing separate notebooks, spreadsheets and memory. GullySales sets up or cleans an existing CRM and reports from it by enquiry outcome rather than by activity logged.

Last updated 14 Nov 2026.

For concrete block manufacturers

Where it usually goes wrong, and what we would do.

  • “The owner's memory is the current system”

    The owner knows which mason built where and which contractor is starting a floor. When the owner is away, that knowledge leaves with them. A shared record is how the yard keeps selling when someone else answers the phone.

  • “A site is a better record than a name”

    One contractor runs several sites and each reaches the wall stage at a different time. Recording the contractor alone loses the point at which the next delivery is due. The site, with its stage, is the row that matters.

  • “Unused software is worse than a paper notebook”

    A yard that buys complex software and enters nothing has paid for an empty record. A shared spreadsheet, filled the same day, is a better start than a system the team avoids.

  • “Dealers and masons need different fields”

    A dealer record needs the referral history and the visit date. A mason record needs the last site and the next stage. One form for both leaves useful fields blank in each.

What we do

What we deliver for concrete block manufacturers.

The work available for this need. We agree the deliverables and responsibilities for your engagement in writing.

  1. A shared enquiry and order sheet

    One place for every enquiry and order, with fields for the person, site, quantity, size and stage.

    Result: Every enquiry and every delivery appears in one shared place.

  2. Separate record types for mason, contractor, dealer and developer

    Fields shaped to each type, so the team records what that relationship needs.

    Result: Each relationship type carries the details that matter to it.

  3. A site timeline

    A simple view of each site by stage, showing when the wall or the next floor is expected.

    Result: You can see which sites will want blocks next.

  4. A choice between sheet and software

    A plain assessment of when the sheet is enough and which Indian CRM tools suit a yard that has outgrown it.

    Result: The yard knows when to move and what it will cost in effort.

  5. A routine for same-day entry

    A rule that every call and delivery is entered the day it happens, with one person responsible.

    Result: Nothing from today's calls waits until tomorrow to be written.

How the result is measured

  • Enquiries logged in the CRM
  • Data completeness
  • Reports generated from CRM data

Recorded as a baseline before work starts, so every later report has an honest comparison.

Fields worth keeping

The fields a block yard keeps for each mason, contractor and site.

Site locality and stage
Entered by whoever takes the order. It tells you when the next order is due and which trucks go where.
Block size and solid or hollow ordered
Entered at billing. A repeat order for the same size is a quick call, and a change of size is a question to ask.
Quantity delivered and the delivery date
Entered by the dispatcher. It is the record you check when a buyer says a load was short.
Buyer type
The manager sets mason, contractor, dealer or developer. It decides what rate terms and documents the follow-up carries.
Complaint raised and how it was settled
Entered by the owner. A site that complained and was settled is called by the owner before the next order.

Who it is for

This is written for these concrete block manufacturers.

  • Hollow concrete block yards serving local builders
  • Solid concrete block makers for compound walls and load-bearing work
  • Machine-based block plants with higher output
  • Yards that also make pavers, kerb stones and precast items
  • Manufacturers selling through building material dealers
  • Plants supplying apartment developers and large contractors
  • Small yards near growing peri-urban towns
  • Producers of lightweight or specialty blocks

Before you decide

When this may not be the right fit.

  • Orders are taken on several staff phones and never written down, and the record would start empty and stay that way
  • You deliver to only a few regular sites, so a notebook kept at the counter serves you as well as a record

Before you decide

Agree the work. Know how to judge it.

CRM for concrete block manufacturers: use these checks to prepare, choose the scope, and review what changes.

Bring the right evidence

List the records your team uses and show how an enquiry becomes an order today. Bring examples of duplicate entries, missing owners, and reports that require manual correction.

Make the scope clear

Agree the stages, required fields, access roles, and integrations before configuring the system. Separate software subscriptions from setup, data work, and training.

Check the work in use

Ask the people who will use the CRM to complete a real handover and find the next action without help. Check that the management report can be traced back to individual records.

Know when to change course

If the process is unclear, buying a more complex CRM adds more places for confusion. Start with the minimum fields and rules the team can use consistently.

These are discussion points, not a fixed package. GullySales confirms the deliverables, responsibilities, fee, and term in writing after reading your brief and speaking with you.

Before we start

What to have ready before the work starts.

The records, access and decisions this work needs from concrete block manufacturers. Anything missing is noted in the written scope, with who will supply it.

The notebooks and phones where enquiries live
We need to see every place a rate or a site detail is written today, including a worker's own phone and the pad by the weighbridge or the counter. Photographs of notebook pages are enough. Whatever stays hidden will not reach the record, and the first weeks will show the gap as missing orders.
One person to own the record
A named person, not the whole office, must be responsible for entries and corrections. Without an owner the record decays within a season, because everyone assumes someone else fixed the duplicate. If the owner wants to do this alone, we plan a simpler record with fewer fields.
A list of dealers with their terms
Dealers differ on credit, commission and delivery arrangements. Write down what each currently has with the yard. Where terms are informal, say so, and we leave the field open instead of guessing. A wrong commission note in a shared record causes a quarrel later.
The sales sheet your staff already trust
If the yard uses a spreadsheet already, bring it as it is, flaws and all. We build from it rather than replacing it. If the sheet is shared by a crowd of people with no rules, tell us who edits what, since the new record needs an edit rule from its first day.
A decision on who may see credit balances
Accounts show unpaid balances against masons and contractors. The owner must decide who on the team can see them and who cannot. We build access to match. With no decision, credit details stay out of the shared record altogether, and the counter must ask the owner before agreeing a fresh load.

How it works

How the CRM work runs

The work itself, in order. How an engagement starts, from your brief to a written scope, is set out on our method page.

  1. 1

    Trace one order from enquiry to payment

    We sit with the owner and the accounts person and follow a recent order from the first call, through the rate, the loading, the dispatch and the payment. You show every notebook, phone and sheet touched on the way. The trace shows exactly where information is lost, and so which fields the record must hold to prevent it.

  2. 2

    Separate masons, contractors, dealers, developers

    We agree the record types and the few fields each needs, such as site, stage, quantity, credit terms and who decides. You say which types matter first. A mason's record is short, a developer's longer, and nothing is added that your staff will not fill in on a busy afternoon.

  3. 3

    Pick a sheet or software with the team

    We show the owner and the office staff a shared sheet and one or two light tools, and ask them to enter three real enquiries in each while we watch. You choose the one the staff finished without grumbling. We do not recommend a tool the yard will not open on an ordinary working day.

  4. 4

    Load last season's contacts in batches

    We take your phone contacts, dispatch book and dealer list, clean the duplicates and enter them under the agreed types, a batch at a time. You compare a few entries with what you know of the dealers. Names that cannot be confirmed stay in a holding list, so they do not pollute the record or send a message to the wrong mason.

  5. 5

    Run the record beside the old notebook

    For a period the team enters each enquiry in the new record and the old notebook together, and we check the two against each other. Disagreements show what the record misses. You decide when the notebook can stop, and the person who owns the record is named, with a backup who knows the password.

  6. 6

    Read repeat orders against the baseline

    Once the record holds a season of enquiries, we pull a simple list of repeat buyers, lapsed buyers and sites at the next stage, and compare it with the figures noted before the work began. You see which masons and dealers bring repeat business and where enquiries go quiet, then decide whom the owner should call.

Where this fits

Three pieces of sales work, in this order.

This work sits inside sales management. A target, a review routine and someone who owns the number.

  1. Step 1

    Sales audit

    Find where deals are being lost and what to fix first.

    Start here if you cannot say where orders are lost.

  2. Step 2

    Sales process design

    One written way to sell, from first enquiry to repeat order.

    Start here if every salesperson sells differently.

  3. Step 3 · you are here

    Sales management

    A target, a review routine and someone who owns the number.

    Start here if the team has targets and no routine.

Tell us what you need Your brief is read before we call. Scope, fee and term in writing.

FAQ

Questions owners ask before they call.

Not here? More answers, or ask on WhatsApp.

Do we need paid software to begin?
No. A shared spreadsheet with clear columns serves a small yard. Move to software when the number of sites or staff makes the sheet hard to keep, and choose a tool your team will enter data into daily.
Who should own the record?
One named person, the manager or an office assistant, though the owner should read it. Everyone enters, but one person checks that entries are complete and that follow-ups are scheduled.
Can the CRM show which masons bring repeat business?
Yes, if orders are recorded against the mason each time. After a period of records, the sheet shows who orders again and which stage of a build they reorder at, so your calls can follow that pattern.
What if masons give a different number each time?
Record the mason's name and each site, and note the numbers used. A mason moves from site to site, so the site is the better key. The constraint in this trade is that the person who orders is not always the person who pays.
What if masons give a different number every time?
Record the number the mason used for this enquiry and add a field for other numbers, so one mason is not stored as three people. The person entering the enquiry searches for the name and site before creating a new record. We set a simple rule for merging duplicates, show the staff how to use it on their own phones, and ask the owner to approve every merge that touches a credit balance.
Can the record be used on a phone at the yard?
Yes. We choose a sheet or tool that opens on the phones your staff already carry, with large buttons and few fields. If the connection at the yard is poor, entries can be made in a notebook first and typed in by the end of the working day. We test it on the actual phones, at the actual weighbridge, before launch, and we do not call the record ready until it works there.
How much does it cost?
There is no price list, because the work differs by business. The fee is scoped after we have read your brief and spoken to you, and put in writing before anything starts, split into our time, your media spend and production.
How long is the contract?
The term is agreed in writing after we have spoken, along with the fee and the reporting. It is never a default twelve months, and renewal is decided on the numbers against the baseline recorded at the start.
How soon will we see results?
It depends on the trade, the channel and what is already in place. After we have read your brief and spoken to you, we say what we would expect to move first and how it will be measured against the baseline. Nothing here is guaranteed.
Who will actually do the work?
The person you speak to before anything starts. We work from one office in Nagarbhavi, Bengaluru, with no account managers in between.

Your next practical step

Tell us what you are trying to grow, and we will read it before we call.

Eight short steps, mostly taps. Skip anything you would rather answer on the call.