Skip to content
GullySales

Control panel manufacturers · CRM

Keep every quotation, drawing revision and OEM contact where the whole shop can read it.

A CRM for a control panel shop is a shared record of buyers, quotations and drawing revisions, so no enquiry depends on one estimator's memory. GullySales sets up the fields to fit panel work and writes the habits that keep the record current.

Scope, fee, reporting and term are agreed in writing after we have read your brief and spoken to you.

Realistic editorial illustration of electrical equipment manufacturers at work in India

What CRM means

A CRM is the record where every enquiry, call and quote is kept against a customer, replacing separate notebooks, spreadsheets and memory. GullySales sets up or cleans an existing CRM and reports from it by enquiry outcome rather than by activity logged.

Last updated 14 Nov 2026.

For control panel manufacturers

Where it usually goes wrong, and what we would do.

  • “The quotation history sits in one person's inbox”

    When the estimator is on leave or leaves, nobody can say what was quoted to a builder last season or which revision was sent. The record is rebuilt from email, and part of it is lost.

  • “A panel job has revisions that a contact list ignores”

    The buyer sends a new I/O list, then a changed motor rating, then a late sequence change. A plain contact sheet cannot show which version was priced, so the quotation and the final order drift apart.

  • “Repeat OEM orders need a machine-model field”

    A builder returns for every unit of a machine model. A CRM that records the model, the panel supplied and the drawing revision lets the shop quote the next unit in less effort than the first.

What we do

What we deliver for control panel manufacturers.

The work available for this need. We agree the deliverables and responsibilities for your engagement in writing.

  1. Fields for panel work

    Company, buyer type, machine or plant, panel type, component makes, drawing revision and quotation status, set up in your chosen tool.

    Result: A record tells a new estimator the whole story of a buyer.

  2. Quotation stages

    A pipeline from brief received to drawing approved, quoted, negotiated, ordered, built and tested.

    Result: Every open quotation has a stage and an owner.

  3. Import of existing records

    Your quotations and contacts taken from spreadsheets and mailboxes into the tool, with duplicates marked for a human decision.

    Result: History is in one place on day one.

  4. Customer and machine-model view

    A view of each customer with the machines and panels supplied, to plan repeat orders and retrofit calls.

    Result: You can see who is due for a conversation.

  5. Team routine

    A short written rule on who updates what, and when, after a call or a site visit.

    Result: Records stay current without extra meetings.

How the result is measured

  • Enquiries logged in the CRM
  • Data completeness
  • Reports generated from CRM data

Recorded as a baseline before work starts, so every later report has an honest comparison.

Fields worth keeping

Keep the fields a panel job is quoted and repeated from.

Machine model and variant
Entered by the estimator. It lets you find the earlier panel for a repeat order and reuse its bill of materials.
Drawing revision and date
Entered by the design desk. It shows which revision a quotation was priced on, so a change is charged correctly.
Control brand and series
Entered by the programmer. It records the PLC or drive family and routes the job to the right programming skill.
Quotation stage and reason lost
Updated by the estimator. It turns each lost order into a note you can act on in the next quote.
Site or retrofit flag
Entered by the sales owner. It separates new-build panels from plant retrofits, which follow different calls and surveys.
Next contact and owner
Set by the person who sent the quote. It prevents a quotation sitting with no name against it.

Who it is for

This is written for these control panel manufacturers.

  • PLC and HMI panel builders for machine builders
  • VFD and soft starter panel makers for pumps, fans and conveyors
  • Servo and motion control panel shops
  • Panel builders for water and effluent treatment plants
  • Instrumentation and DCS marshalling panel makers
  • Retrofit and upgrade specialists for older plant panels
  • Panel shops that also do site wiring and commissioning
  • Panel builders for HVAC, BMS and building automation contractors

Before you decide

When this may not be the right fit.

  • Your quotations sit in several personal mailboxes and no one agrees to move them, so the record would stay half-empty.
  • You have no quotation numbering, so the system could not link a drawing revision to the price given.
  • You hold fewer than a dozen active customers and the estimator remembers each, so a system would add typing without insight.

Before you decide

Agree the work. Know how to judge it.

CRM for control panel manufacturers: use these checks to prepare, choose the scope, and review what changes.

Bring the right evidence

List the records your team uses and show how an enquiry becomes an order today. Bring examples of duplicate entries, missing owners, and reports that require manual correction.

Make the scope clear

Agree the stages, required fields, access roles, and integrations before configuring the system. Separate software subscriptions from setup, data work, and training.

Check the work in use

Ask the people who will use the CRM to complete a real handover and find the next action without help. Check that the management report can be traced back to individual records.

Know when to change course

If the process is unclear, buying a more complex CRM adds more places for confusion. Start with the minimum fields and rules the team can use consistently.

These are discussion points, not a fixed package. GullySales confirms the deliverables, responsibilities, fee, and term in writing after reading your brief and speaking with you.

Before we start

What to have ready before the work starts.

The records, access and decisions this work needs from control panel manufacturers. Anything missing is noted in the written scope, with who will supply it.

Access to quotation folders and mail
Shared folders, spreadsheets and the inboxes where quotations sit, shown to us by the estimator. Without access, history stays behind and the record begins with today's enquiries only, so the repeat buyers of the last few years look like strangers.
A list of repeat customers and their machine models
The OEM customers who reorder and the machines each one builds. Memory will do for a first list. Without it the machine-model field starts empty and repeat orders cannot be matched, which was one of the reasons for setting up the record at all.
The estimator at the working sessions
Two short sessions to set fields and test them against real quotations. Without the estimator, fields are guessed, and the first quotation entered reveals what is missing, by which time the owner has formed a poor view of the system.
A decision on who may edit and delete
Who changes a stage, who closes an order and who may delete a record. The owner decides, and a short list is enough. Without a decision, anyone edits anything, a quotation disappears now and then, and the history can no longer be trusted by the person who needs it.
Your quotation numbering and revision habit
How you number quotations and mark revisions today, even if it is irregular. The record follows your habit rather than replacing it. Without this, the system invents a scheme that the estimator ignores, and the old numbers on drawings and mails no longer match the record.

How it works

How the CRM work runs

The work itself, in order. How an engagement starts, from your brief to a written scope, is set out on our method page.

  1. 1

    Gather quotation history from every inbox

    The quotation history sits in one person's inbox. We collect it from the owner's and estimator's mail, the shared folder and any notebook, and list the customers and panel jobs that appear. You decide which source is the base. Nothing is deleted until the new records have been checked against the old ones.

  2. 2

    Design fields for panel work

    We create the fields a panel quotation needs: panel type, rating, enclosure, main component makes, drawing status, machine model and the buyer's role. The estimator tests them on a live quotation. Fields nobody fills are dropped at once, so the record stays short enough to be used on a busy day.

  3. 3

    Set stages and revisions for a quotation

    A panel job has revisions that a contact list ignores. We set stages: enquiry, information received, quotation, revision, order, drawing approval, dispatch. Each revision is stored with the reason for it. Your estimator and the owner agree the list, so that every stage means the same to both.

  4. 4

    Import existing records and tidy them

    We load the history into the system, merge duplicates and mark records that need a call to complete. The estimator checks a sample against their memory. Repeat orders from machine builders are linked by machine model, so a returning buyer is recognised at once instead of treated as new.

  5. 5

    Build the customer and machine-model view

    For each customer the view shows past quotations, orders, drawings and the machine models they build. A repeat OEM order can be found by model. The owner uses the view before a call, and the estimator uses it to price repeat work with the earlier file open beside the new request.

  6. 6

    Run the team routine and read the first weeks

    We agree a short routine: every enquiry is entered on arrival, every revision is logged, every order is closed with its source. After the team has used the system for some weeks, we compare the number of quotations tracked with the number recorded before and read the gaps together.

Where this fits

Three pieces of sales work, in this order.

This work sits inside sales management. A target, a review routine and someone who owns the number.

  1. Step 1

    Sales audit

    Find where deals are being lost and what to fix first.

    Start here if you cannot say where orders are lost.

  2. Step 2

    Sales process design

    One written way to sell, from first enquiry to repeat order.

    Start here if every salesperson sells differently.

  3. Step 3 · you are here

    Sales management

    A target, a review routine and someone who owns the number.

    Start here if the team has targets and no routine.

Tell us what you need Your brief is read before we call. Scope, fee and term in writing.

FAQ

Questions owners ask before they call.

Not here? More answers, or ask on WhatsApp.

Which CRM should a panel shop use?
Whichever the team will update. A spreadsheet with strict columns is better than a heavy tool nobody opens. We choose with you after looking at how many people quote and how many open jobs you carry.
Can drawings be attached to the record?
Yes, in the common tools, or as a link to a shared folder. The record should point to the revision priced, so anyone can open the same file the buyer saw.
Who owns the data?
You do. We set up the tool in your account and leave the records with you, with a written list of fields and rules so a new person can pick it up.
What should be linked to a customer record?
Link the quotation, the drawing revision and the test sheet for each job. When a builder returns with the next model, the estimator can open the last panel in one place. Keep large files in your drawing store and put the reference in the record.
Which CRM suits a small panel shop?
A simple one the estimator will open every working day. The needs are few: a record per enquiry, stages, stored revisions, links to drawings and a view by customer and machine model. We compare one or two tools already within your budget and recommend one in plain terms. If you already pay for a CRM that can hold these fields, we try it first. The choice stays with you, and we do not set up a tool the team will not use.
Do we need to enter every enquiry, even small ones?
Yes, in a short form. A small enquiry from a machine builder may be the start of repeat orders, and a record of the ones you declined tells you which sources send price checks. The entry takes a minute if the fields are few. The estimator can enter it from a call, and a saved mail reply captures the rest. We would sooner have a thin record of every enquiry than a full record of a few.
How much does it cost?
There is no price list, because the work differs by business. The fee is scoped after we have read your brief and spoken to you, and put in writing before anything starts, split into our time, your media spend and production.
How long is the contract?
The term is agreed in writing after we have spoken, along with the fee and the reporting. It is never a default twelve months, and renewal is decided on the numbers against the baseline recorded at the start.
How soon will we see results?
It depends on the trade, the channel and what is already in place. After we have read your brief and spoken to you, we say what we would expect to move first and how it will be measured against the baseline. Nothing here is guaranteed.
Who will actually do the work?
The person you speak to before anything starts. We work from one office in Nagarbhavi, Bengaluru, with no account managers in between.

Your next practical step

Tell us what you are trying to grow, and we will read it before we call.

Eight short steps, mostly taps. Skip anything you would rather answer on the call.