Skip to content
GullySales

Conveyor manufacturers · Lead generation

Bring in conveyor enquiries that carry a load, a length and a site.

Lead generation for a conveyor maker means drawing in plant, warehouse and project teams who have a real transfer problem to solve, and capturing the details needed to quote. GullySales works on pages by conveyor type, an enquiry sheet that asks the engineering questions and a record of where each enquiry came from.

Scope, fee, reporting and term are agreed in writing after we have read your brief and spoken to you.

Realistic editorial illustration of industrial equipment manufacturers at work in India

What lead generation means

Lead generation is the combined work of every channel that brings in a new enquiry, whether from search, adverts, referrals or a stall at an exhibition. GullySales runs these channels together and reports the number of enquiries each one produced, not the activity behind it.

Plan the next part of the work

Last updated 21 Nov 2026.

For conveyor manufacturers

Where it usually goes wrong, and what we would do.

  • “A bare call for a conveyor is not yet a lead”

    Someone rings and asks for a conveyor rate. Without the material, the carton size, the run and the floor, there is nothing to price. The lead exists only once those answers are written down, and the maker who asks first gets them.

  • “Buyers search for the use, not the machine”

    A warehouse head types roller conveyor for cartons, a food plant types stainless steel belt for washdown. A single page called conveyor systems answers neither, so the enquiry goes to a maker whose page names the use.

  • “Consultants and contractors draw the layout before the buyer calls”

    Some enquiries start with a layout consultant or a mechanical contractor who has already shortlisted makers. If the maker is not known to them, the buyer never hears the name.

  • “Rate collectors drain the engineering team”

    Buyers gathering three rates for a budget file still expect a site visit. A lead source that cannot tell a serious project from a price check sends engineers on drives that end nowhere.

What we do

What we deliver for conveyor manufacturers.

The work available for this need. We agree the deliverables and responsibilities for your engagement in writing.

  1. Pages by conveyor type and buyer

    Separate pages for belt, roller, chain, screw and stainless steel conveyors, each tied to the site that uses it, with photographs from your installations.

    Result: Each enquiry names the conveyor type it came for.

  2. An enquiry sheet with engineering questions

    Material or carton, weight, length, turns, speed, floor and power supply, asked in the order an engineer would ask them.

    Result: Every enquiry arrives with enough detail to start a quote.

  3. Source tagging on every enquiry

    A note of whether the enquiry came from search, a marketplace, a consultant or a repeat buyer.

    Result: The owner can see which source brings serious projects.

  4. Consultant and contractor outreach list

    Layout consultants, warehouse planners and mechanical contractors in the regions you serve, with a short introduction to your builds.

    Result: A named list of people who draw layouts, with contact status recorded.

  5. A site-visit filter

    A short set of questions that separates a funded project from a rate check before an engineer travels.

    Result: The visit calendar holds projects, not price collection.

How the result is measured

  • Relevant enquiries by source
  • Duplicate and unsuitable enquiries
  • Time to the first response
  • Accepted enquiries reaching an agreed next step

Recorded as a baseline before work starts, so every later report has an honest comparison.

What to capture or send

Ask for the load, the length and the site before a drawing.

A conveyor is sized from what it carries and where it runs. The details below let the engineering desk judge an enquiry before a site visit is booked.

Material and unit weight
Cartons, drums, grain or crushed stone. It decides belt, roller or screw and shows whether the enquiry is for your build.
Length, incline and routing
Straight run, turn or lift. The sketch or photograph of the route lets the engineer judge the frame and drive before visiting.
Throughput the line must meet
Units or tonnage per hour as the buyer states it, since it drives motor size and belt speed.
Environment of the site
Wet, dusty, hot or washdown. It points to stainless, sealed bearings or special belt, and changes the quote.
Who drew the layout
A consultant, a contractor or the plant itself. It tells you whose approval the quote must pass.
Source of the enquiry
Marketplace, search, consultant or past client. It shows which route brings buyers with loads, not only rate checks.

Who it is for

This is written for these conveyor manufacturers.

  • Belt conveyor makers for factories and packing lines
  • Roller conveyor makers for warehouses and parcel hubs
  • Chain and slat conveyor makers for auto and engineering plants
  • Screw and bucket conveyor makers for grain, cement and bulk material
  • Stainless steel conveyor makers for food and pharma
  • Sorting and cross-belt conveyor builders for e-commerce hubs
  • Mining and quarry belt conveyor builders
  • Conveyor spares, belt and roller suppliers with installation teams

Before you decide

When this may not be the right fit.

  • Your engineers are out on site visits most days, so new enquiries would wait for a drawing that nobody has time to make.
  • You build only to order and cannot quote from a catalogue size, so every enquiry would cost a full engineering review.
  • You depend on one purchase officer for repeat work, so new leads would pull effort from the account that pays.

Before you decide

Agree the work. Know how to judge it.

Lead generation for conveyor manufacturers: use these checks to prepare, choose the scope, and review what changes.

Bring the right evidence

Define the organisations or buyers you can serve and the reasons they would consider a conversation. Bring examples of accepted and rejected prospects so the selection rule is visible.

Make the scope clear

Agree the research sources, contact approach, qualification rules, and handover. Clarify which meetings count as accepted and what happens to replies that are not ready to buy.

Check the work in use

Review why a prospect was selected and what was learned from the response. Count held, relevant conversations separately from contacts found, messages sent, or meetings booked.

Know when to change course

If the same objection appears repeatedly, adjust the offer or buyer group before increasing outreach. Respect a request to stop contact and keep the exclusion in the record.

These are discussion points, not a fixed package. GullySales confirms the deliverables, responsibilities, fee, and term in writing after reading your brief and speaking with you.

Before we start

What to have ready before the work starts.

The records, access and decisions this work needs from conveyor manufacturers. Anything missing is noted in the written scope, with who will supply it.

Quotations from the last season with outcomes
We need the quotations sent, with a note against each of won, lost or no answer. A sheet or a folder is acceptable. Without outcomes, we cannot tell a lead from a rate request, and the first month of the work is spent reconstructing the record with the sales engineer.
The list of conveyor types you will quote
The works head must say which types you build in the regular way, which you build only to order, and which you refuse. Pages written for a type you do not want draw wasted enquiries. When the list is unclear, we begin with the single type with the steadiest order book.
A person to read every new enquiry
One named person, ideally an engineer who can judge a load from a description, must read each enquiry and decide whether it deserves a site visit. A buyer who has asked three makers for a rate moves to the one that asks the right question. Without this person, we hold the outreach back.
Photographs of conveyors at work on site
Pictures of installed lines, with the material moving, are the proof that opens a conversation with a plant head. Phone photographs are acceptable if the line is clear. Without them the outreach rests on words alone, and the response to the first messages will be weaker.

How it works

How the lead generation work runs

The work itself, in order. How an engagement starts, from your brief to a written scope, is set out on our method page.

  1. 1

    Open the last season's quotation file

    We start with the quotations your sales engineer sent over the last season, from the file, the sheet or the inbox where they sit. For each we note the conveyor type, the material moved, the buyer's role and whether a drawing was asked for. You tell us which became orders. That shows what a real lead looked like, before we write a single form.

  2. 2

    Separate the conveyors you build by type

    With the works head we list the conveyor types you build and the sites each has served: belt, roller, chain, screw, slat, and any built to order. You mark the types you want more orders for and those you would rather decline. Every page and enquiry sheet that follows is built around these types, not around a general promise to build conveyors.

  3. 3

    Write the enquiry sheet with your engineer

    We draft the sheet with the person who prices the work. It asks for the material moved, the load, the length, the lift, the speed wanted, the floor or structure at the site and the date the line must run. You cut questions the engineer never uses. A buyer who answers it is a lead; one who only asks a rate is not.

  4. 4

    List consultants, contractors and plant heads

    From past orders and the sales team's knowledge we list the layout consultants, mechanical contractors and plant engineers who specify or recommend conveyors, with the industries they serve. You add the names you know personally. The list is the set of people we write to, and each message carries a source tag so replies can be traced.

  5. 5

    Read enquiries against the recorded count

    We compare the enquiries now arriving, by source, with the count recorded before the work began, and mark which carried enough detail to quote and which led to a site visit. You tell us which became orders. Sources that bring only rate requests are reduced, and the ones behind site visits receive more of the effort.

Where this fits

Three pieces of sales work, in this order.

This work sits inside sales process design, at stage 1, prospecting and lead generation. The audit comes before it, and sales management keeps it running.

  1. Step 1

    Sales audit

    Find where deals are being lost and what to fix first.

    Start here if you cannot say where orders are lost.

  2. Step 2 · you are here

    Sales process design

    One written way to sell, from first enquiry to repeat order.

    Start here if every salesperson sells differently.

  3. Step 3

    Sales management

    A target, a review routine and someone who owns the number.

    Start here if the team has targets and no routine.

Tell us what you need Your brief is read before we call. Scope, fee and term in writing.

FAQ

Questions owners ask before they call.

Not here? More answers, or ask on WhatsApp.

Does every enquiry deserve a chase?
Rank them. A buyer with a drawing, a load and a date goes first, and a bare rate request gets the enquiry sheet before anything else. That keeps the engineers on projects that can turn into orders.
Do marketplace leads count as lead generation?
They count as one source among several. Record which conveyor type each marketplace enquiry asked for, and compare their outcome with enquiries from your own pages and from consultants before deciding how much effort each deserves.
What is the first thing to fix?
The first reply. If it asks the right engineering questions, every source you add afterwards produces better enquiries. If it only sends a price list, more traffic simply produces more unanswered rate requests.
Which enquiries should get a site visit?
Visit when the buyer has given material, length and throughput, or sent a site photograph. A visit costs an engineer's day, so a bare enquiry gets a reply asking for the details first. Keep a list of those who answered, because they are the ones ready for a quote.
Should we reply to a buyer who sends only a photograph of a site and asks for a price?
Reply, but reply with the enquiry sheet rather than a price. A photograph shows a space, not a load, a speed or a material, and a price given without them is a guess that can bind you. Thank the buyer, say what the engineer needs and offer to visit if the order is real. A buyer who fills the sheet is serious, and one who does not has told you something. We would write the reply with your sales engineer, so it sounds like a person who knows the work and not a form.
What should we do with enquiries that arrive for conveyors we do not build?
Record them with the source and the reason for refusal, and reply politely, naming a type you do build if one might fit. Do not ignore them. A refused enquiry still tells you which pages are drawing the wrong visitor, and the log of refusals decides what the page should say it does not make. If a type is asked for again and again, the owner may reconsider building it. We would count these refusals alongside the real leads when reading the results.
How long is the contract?
The term is agreed in writing after we have spoken, along with the fee and the reporting. It is never a default twelve months, and renewal is decided on the numbers against the baseline recorded at the start.
How soon will we see results?
It depends on the trade, the channel and what is already in place. After we have read your brief and spoken to you, we say what we would expect to move first and how it will be measured against the baseline. Nothing here is guaranteed.
Who will actually do the work?
The person you speak to before anything starts. We work from one office in Nagarbhavi, Bengaluru, with no account managers in between.
What do you need from us?
Your brief, and a conversation. After that, access to whatever this work touches, such as your website, your accounts or your enquiry record, and time with the people who handle your enquiries.

Your next practical step

Tell us what you are trying to grow, and we will read it before we call.

Eight short steps, mostly taps. Skip anything you would rather answer on the call.