Skip to content
GullySales

Door manufacturers · Follow up systems

Follow each quotation and sample door until the builder says yes or no.

A follow-up system for a door manufacturer is the routine of calling and writing to buyers after a quotation, a sample door or a site visit, with a note of who decides. GullySales builds the list, the reminders and the message wording, and your sales team makes the calls.

Scope, fee, reporting and term are agreed in writing after we have read your brief and spoken to you.

Door Hardware product collection

What follow up systems means

A follow-up system is the set routine for calling, messaging or emailing an enquiry more than once, since most buyers do not decide on the first conversation. GullySales sets the number and timing of follow-ups so an undecided buyer keeps hearing from you until they decide either way.

Last updated 14 Nov 2026.

For door manufacturers

Where it usually goes wrong, and what we would do.

  • “Silence after a quotation is not a no”

    A purchase head who has received four quotations seldom replies to any of them. The manufacturer who calls to ask what the comparison looks like is the one who learns whether price, finish or delivery is the issue.

  • “The sample door needs two calls”

    One call confirms the sample door arrived, and another asks the site engineer what was found. Skipping the first means the sample sits in a store room, and skipping the second means the comments never reach you.

  • “Architects follow up on documents”

    A consultant who received a fire door document set may reply only when the drawings are ready. A gentle note at the right point in the project, with the next document they are likely to need, keeps you in the specification.

  • “A lost order still holds information”

    When a builder buys elsewhere, a polite call asking what decided it tells you whether the loss was on rate, finish or lead time. That reply is worth recording, and the builder is more likely to invite you next time.

What we do

What we deliver for door manufacturers.

The work available for this need. We agree the deliverables and responsibilities for your engagement in writing.

  1. Follow-up calendar

    A list of open quotations and samples with the next call, the person to call and the reason noted.

    Result: The sales head can see which quotations are due a call today.

  2. Call scripts for each stage

    Short call outlines for after the quotation, after the sample and after a lost order.

    Result: Each call has a stated purpose and a question to ask.

  3. Message wording for WhatsApp and email

    Standard messages for sending documents, confirming samples and asking for a decision.

    Result: A salesperson sends a clear message in seconds.

  4. Reason-lost record

    A field recording why an order was lost or won, in the buyer's words.

    Result: Each closed quotation carries a reason.

  5. Review of stalled quotations

    A regular look at quotations that have not moved, with a decision to call again or close.

    Result: No quotation stays open without a next step.

How the result is measured

  • Follow-up completion rate
  • Average number of follow-ups before close
  • Enquiries closed after repeat follow-up

Recorded as a baseline before work starts, so every later report has an honest comparison.

What to capture or send

Each message names the quotation, the sample or the document the buyer holds.

Quotation sent
A message to the purchase head and the site engineer, with the door schedule attached and a question on whether the counts match the latest drawing.
Sample door delivered
A call or message to the engineer after delivery, asking for the sample's verdict and what changes are wanted.
Fire door documents sent
A message to the architect confirming the papers sent and asking whether the project needs anything further from the plant.
Order lost
A polite request for the reason, such as price or lead from another maker, filed against the project.
Order delivered
A check with the site that the doors arrived undamaged and fit the frames, with a way to report a fault.

Who it is for

This is written for these door manufacturers.

  • Flush door manufacturers
  • Moulded skin and panel door makers
  • Solid wood and engineered wood door producers
  • WPC and PVC door makers for bathrooms and kitchens
  • Steel and security door manufacturers
  • Fire-rated door manufacturers
  • Door frame and shutter factories supplying builders
  • Designer and carved door makers for premium homes

Before you decide

When this may not be the right fit.

  • Your quotations are not dated or versioned, so a follow-up would refer to a document the buyer cannot identify.
  • No one on the team can answer a technical question from the engineer, and chasing for a verdict would meet a question you cannot answer.

Before you decide

Agree the work. Know how to judge it.

Follow-up systems for door manufacturers: use these checks to prepare, choose the scope, and review what changes.

Bring the right evidence

Trace recent enquiries from arrival to the last recorded action. Include a won enquiry, an unsuitable one, and one that went quiet, with personal details removed for the initial discussion.

Make the scope clear

Agree who accepts each enquiry, what makes it qualified, and how ownership changes. Include a rule for missed replies and a clear reason for closing an enquiry.

Check the work in use

Pick an enquiry at random and ask the team to find its owner, latest conversation, and next action. Check that the record agrees with what actually happened.

Know when to change course

If no one has capacity to respond, assign that responsibility before buying more leads. Automation can support the owner, but it cannot replace an unresolved handover.

These are discussion points, not a fixed package. GullySales confirms the deliverables, responsibilities, fee, and term in writing after reading your brief and speaking with you.

Before we start

What to have ready before the work starts.

The records, access and decisions this work needs from door manufacturers. Anything missing is noted in the written scope, with who will supply it.

The quotation register with outcomes
A list of quotations with date, buyer, door type and outcome is the base. If outcomes were never recorded, the sales head fills them in from memory for the past season. A weak base makes our first counts less certain.
Phone permission for messages
We need to know which buyers have agreed to receive messages from the factory. A contact who gave a number for a dispatch call has not necessarily agreed to marketing. Bring what you have, and we build the list from there. Buyers with no recorded permission are reached by call only until they agree.
A person who makes the follow-up calls
Name the caller for each stage. We shape the calendar to that person's day. If the salesperson who sold the door also follows up, say so, because that changes how many calls fit into a working day beside site visits and factory trips.
Your view of when to stop calling
Only you can say how long a builder who never answers should stay on the list. Tell us your limit in terms of calls made, not days. Without a view from you, the list never shrinks.
A sample of lost-order reasons
Bring examples of why orders were lost: price, delivery, finish, a rival's sample. A short list from the sales head is enough. It seeds the reason-lost record and tells us the choices to offer in the field.

How it works

How the follow up systems work runs

The work itself, in order. How an engagement starts, from your brief to a written scope, is set out on our method page.

  1. 1

    Read the quotation register for stalled files

    We open your quotation register or file pile and sort it by what happened after the quotation: ordered, refused, silent. The silent ones are what interest us. You tell us the story behind a few, and we note the buyer type and door. This gives the follow-up system its first real material, including how long a quotation for a builder differs from a dealer rate sheet in the way people respond to it.

  2. 2

    Decide who closes a quotation and when

    With your sales head we agree what counts as closed: an order, a clear no, or a decision to stop calling. We write down who may close a file and what must be recorded. Until this is settled, files stay open forever and the follow-up list grows with dead names.

  3. 3

    Write the questions asked on each call

    For each stage we draft the questions a salesperson asks: has the site engineer seen the sample, is the architect waiting on the fire papers, is the stage of construction ready for doors. Your team rewrites them in their own voice. The questions go onto the call script, so no one improvises with a stranger.

  4. 4

    Draft the WhatsApp and email wording

    We write the short messages sent after a quotation, a sample and a site visit, in plain words with the door type named. Your sales head reads them for tone. We keep each message to one request. Messages go only to buyers who have given a number for this purpose, and a message after a site visit names the site and the door set discussed, so it cannot be mistaken for a mass text.

  5. 5

    Run the calendar with two salespeople

    Two salespeople use the follow-up calendar on their live quotations. We watch which reminders they ignore and which calls get answered. You see the first version of the lost-reason record being filled. We adjust the steps before the whole team starts, so the calendar suits how your people work.

  6. 6

    Review stalled quotations against the starting count

    We compare the number of quotations pending, replied to and closed with the count taken before the system began. You and your sales head read the reason-lost entries together and decide what to change in price, sample route or wording. We report what we see, including the quotations that stayed open with no reason recorded, and make no claim about orders.

Where this fits

Three pieces of sales work, in this order.

This work sits inside sales process design, at stage 2, qualification. The audit comes before it, and sales management keeps it running.

  1. Step 1

    Sales audit

    Find where deals are being lost and what to fix first.

    Start here if you cannot say where orders are lost.

  2. Step 2 · you are here

    Sales process design

    One written way to sell, from first enquiry to repeat order.

    Start here if every salesperson sells differently.

  3. Step 3

    Sales management

    A target, a review routine and someone who owns the number.

    Start here if the team has targets and no routine.

Tell us what you need Your brief is read before we call. Scope, fee and term in writing.

FAQ

Questions owners ask before they call.

Not here? More answers, or ask on WhatsApp.

How frequently should we call a builder?
Frequently enough that the builder remembers you, and not so frequently that the call becomes pressure. We set the rhythm with your sales head for each project, based on its stage.
Who does the calling?
Your sales team does. We set up the list, the wording and the reminders, and your people hold the relationship.
What if the builder never answers?
Try another route, such as the site engineer or the architect, and record each attempt. After a fair number of tries, close the quotation with a note and revisit when the next phase starts.
How do we follow up when the sample is approved but no order comes?
Ask what the builder is waiting for, such as a site stage, a budget release or a final schedule. Approval of a sample is not a purchase. Note the reason in the record and return when that event is due.
Should the architect get the same follow-up as the purchase head?
No. An architect waits on documents, drawings and finish samples, and a follow-up that talks only of price annoys them. A purchase head waits on rates, delivery and credit. We write separate calls and messages for each, based on what each asked at the quotation stage. Your sales team marks the role on every quotation so the right script appears.
Will the system chase a builder who has paid an advance?
No. Once an order is confirmed the file moves out of the sales follow-up and into the dispatch and payment routine. We mark the stage in the register so no one sends a sales message to a buyer waiting for a delivery date. A builder who has paid will meet a different message about staged supply, which your dispatch lead owns and writes with us.
How much does it cost?
There is no price list, because the work differs by business. The fee is scoped after we have read your brief and spoken to you, and put in writing before anything starts, split into our time, your media spend and production.
How long is the contract?
The term is agreed in writing after we have spoken, along with the fee and the reporting. It is never a default twelve months, and renewal is decided on the numbers against the baseline recorded at the start.
How soon will we see results?
It depends on the trade, the channel and what is already in place. After we have read your brief and spoken to you, we say what we would expect to move first and how it will be measured against the baseline. Nothing here is guaranteed.
What do you need from us?
Your brief, and a conversation. After that, access to whatever this work touches, such as your website, your accounts or your enquiry record, and time with the people who handle your enquiries.

Your next practical step

Tell us what you are trying to grow, and we will read it before we call.

Eight short steps, mostly taps. Skip anything you would rather answer on the call.