Skip to content
GullySales

Granite, marble and stone processors · Sales process

Move an enquiry to an order through steps your salesmen can repeat.

A sales process for a stone processor is a short, written set of steps from the first enquiry through samples, visit, quotation and order to dispatch. GullySales writes the steps with your team, so a good salesman's habits become the way everybody sells.

Scope, fee, reporting and term are agreed in writing after we have read your brief and spoken to you.

A supervisor shows granite and marble slabs to an architect

What sales process means

A sales process is the fixed sequence of steps, such as enquiry, site visit, quote and order, that every deal is expected to pass through in the same order. GullySales writes this sequence down for your business and checks that every salesperson actually follows it.

Plan the next part of the work

Last updated 21 Nov 2026.

For granite, marble and stone processors

Where it usually goes wrong, and what we would do.

  • “Every salesman sells in their own way”

    One sends samples first, another sends a rate, and the owner cannot tell which method wins.

  • “The quotation is where the sale stalls”

    A buyer asks for a rate, receives a number, and the conversation ends because nobody asked about the site, the quantity or the competition.

  • “Dispatch problems are discovered by the customer”

    A wrong lot or a short load reaches the site, and the buyer finds out before the yard does.

What we do

What we deliver for granite, marble and stone processors.

The work available for this need. We agree the deliverables and responsibilities for your engagement in writing.

  1. A written sales process

    The steps from enquiry to order, with who does each step, what is asked and what is recorded.

    Result: A new salesman can follow the same path as the best one.

  2. Qualifying questions

    A set of questions on stone, use, quantity, site, timing, budget range and decision maker.

    Result: Time goes to buyers who will actually order.

  3. Sample and visit routine

    What is sent, how it is labelled, how a visit to the yard is run and what is noted afterwards.

    Result: A sample or a visit moves the sale forward.

  4. Quotation and negotiation guide

    A quotation format, the points that can move and the ones that cannot, and what to say to a price-only buyer.

    Result: A discount is a decision, not a reflex.

  5. Order and dispatch checklist

    A check of lot, finish, thickness and quantity before loading, with photographs of the load and a handover note.

    Result: The buyer receives what was agreed.

  6. Review of won and lost quotations

    A short look at why quotations were won or lost, taken from the record.

    Result: The process improves from real cases.

How the result is measured

  • Enquiries with a named owner and next action
  • Opportunities meeting the stage evidence
  • Time waiting at each decision
  • Handovers returned for missing information

Recorded as a baseline before work starts, so every later report has an honest comparison.

Steps of a sale

The steps of a stone sale, named the way the trade says them, and what to ask and record at each.

Enquiry
Reply the same day and record the source. Ask what the stone is for, the quantity, the city and who decides, before you send any rate.
Qualify
Separate project buyers from rate checkers. Note stone, use, rough area, timing and whether an architect or a builder is involved.
Sample, visit or photographs
Send a labelled sample or invite the buyer to the yard to choose the lot. Record what was shown and what the buyer said about it.
Quotation
Send a written quotation with stone, finish, size, quantity, rate basis, delivery and payment terms. Write the next call date on it.
Follow-up and negotiation
Call on the date, ask what stands between the buyer and an order, and record the answer. Agree what can move before you start the talk.
Close, dispatch and handover
Confirm lot and quantity in writing, photograph the load, and call the site after delivery to check for breakage or shortage.

Who it is for

This is written for these granite, marble and stone processors.

  • Granite slab and tile processors
  • Marble processors and cutters
  • Kota stone, sandstone and limestone producers
  • Quartz and engineered stone fabricators
  • Countertop, kitchen and vanity fabricators
  • Monument, memorial and temple stone workshops
  • Stone craft, statue and carving units
  • Cobble, paving and garden stone suppliers
  • Block traders and quarry-linked processors
  • Export-oriented stone processors

Before you decide

When this may not be the right fit.

  • The owner closes every deal alone from memory and will not hand over the pricing, so a written process would not be followed.
  • You do not record why a quotation was lost, so the process would be written without evidence of where sales stall.

Before you decide

Agree the work. Know how to judge it.

a sales process for granite, marble and stone processors: use these checks to prepare, choose the scope, and review what changes.

Bring the right evidence

Bring examples of deals that moved forward and deals that stalled. Record what the buyer had actually agreed at each stage rather than relying on the salesperson's confidence.

Make the scope clear

Define the entry and exit rule for each stage, the owner, and the document or decision that moves the deal. Agree how exceptions will be handled before rolling the process out.

Check the work in use

Take a live enquiry through the proposed stages with the team. Two people reviewing the same evidence should place it at the same stage and agree the next action.

Know when to change course

If a stage produces no useful decision or handover, remove it. The process should help someone do the next piece of work, not create administration for its own sake.

These are discussion points, not a fixed package. GullySales confirms the deliverables, responsibilities, fee, and term in writing after reading your brief and speaking with you.

Before we start

What to have ready before the work starts.

The records, access and decisions this work needs from granite, marble and stone processors. Anything missing is noted in the written scope, with who will supply it.

Ten recent quotations, won and lost
Bring a mix of ten quotations: some that became orders and some that did not. We read them to see where sales stall. When the notes are thin, we rely on what the salesperson recalls, and the process starts with fewer facts. Include one quotation where the buyer asked only for the lowest rate, because the guide must say what to do then.
Time with the best salesperson
Your strongest salesperson must give us a few hours to explain what they do. They need not be an expert at explaining. Without them, we write a process from the weakest habits, and the team sees no reason to follow it.
The dispatch and packing routine as it is
Tell us how a lot is checked, packed and loaded today, and who signs for it. A walk through the loading bay with the dispatch manager is enough. If nothing is written, we write down what we see, and the owner corrects it. Photographs of a packed bundle and a loaded truck help us write the checklist lines in the dispatch staff's own words.
A decision on who can change a price
State who may offer a discount and by how much, and who must be asked. We do not decide this. Without it, the quotation guide cannot mark where a salesperson must stop and ask. Name also who may release a held slab to another buyer, since that choice sits beside the price.
A yard visit rule for buyers
Decide when a buyer is invited to the yard, who receives them and what they see. A yard that is not ready for visitors needs a plan first. When missing, we leave the visit step in draft until a host is named. Tell us what the buyer sees in the yard, from the gate to the slab rack, so that the host knows which areas are safe to walk through and which are closed.

How it works

How the sales process work runs

The work itself, in order. How an engagement starts, from your brief to a written scope, is set out on our method page.

  1. 1

    Shadow a salesperson through one quotation

    We sit beside one of your salespeople and listen to a real enquiry from the first call to the quotation sent. We note what they ask, what they skip and when they offer a price. The owner is told what we saw, with no names attached. What exists afterwards is a plain account of how stone is sold in your yard today.

  2. 2

    Write the steps on the yard-office wall

    We draw the sale as a short sequence in your own words: enquiry, qualifying, sample or visit, quotation, price talk, order and dispatch. You and your sales head agree who does each step and who may change a price. The sheet is printed and fixed to the wall of the sales office.

  3. 3

    Draft the qualifying and quotation scripts

    With your best salesperson we write the questions to ask before a rate is given, and the wording of the quotation email or message. The script covers the architect, the builder, the dealer and the exporter. You test it with a real call and tell us what sounds unnatural. We change it until your team would say it aloud.

  4. 4

    Build the sample and dispatch checklists

    We write a sample routine that records which board went to whom, and a dispatch checklist covering lot match, packing, loading photographs and transport details. The dispatch manager reviews it line by line. You decide who signs the checklist before a truck leaves, because that person owns the dispatch problem when it appears.

  5. 5

    Practise the steps with the whole team

    We bring the sales team and the dispatch staff together and run three real situations through the new steps, such as a rate-only enquiry, a late quotation and a lot mismatch. The team marks where the sheet disagrees with reality. We revise the sheet on the spot and agree a start date for using it.

  6. 6

    Read won and lost quotations against the old pattern

    After the team has used the process, we go through won and lost quotations together and compare them with the quotation record from before. You see which step lost orders and which saved them. The owner decides what changes in the process and who explains the change to the team.

Where this fits

Three pieces of sales work, in this order.

This work sits inside sales process design, at stage 1, prospecting and lead generation. The audit comes before it, and sales management keeps it running.

  1. Step 1

    Sales audit

    Find where deals are being lost and what to fix first.

    Start here if you cannot say where orders are lost.

  2. Step 2 · you are here

    Sales process design

    One written way to sell, from first enquiry to repeat order.

    Start here if every salesperson sells differently.

  3. Step 3

    Sales management

    A target, a review routine and someone who owns the number.

    Start here if the team has targets and no routine.

Tell us what you need Your brief is read before we call. Scope, fee and term in writing.

FAQ

Questions owners ask before they call.

Not here? More answers, or ask on WhatsApp.

Who does which step, the owner or the salesman?
The salesman should own enquiry to quotation, and the owner should join for large projects, big dealers and final price. Write that rule down, so that nobody waits for approval on small jobs.
When should we send the quotation?
After you know the stone, quantity and site, and ideally after the buyer has seen a sample or the lot. A rate sent too early becomes a number the buyer compares without understanding what it covers.
How do we deal with a buyer who asks only for the lowest price?
Ask what the stone is for, show the difference in lot, thickness and finish, and quote honestly. If the buyer wants only the lowest rate, let the sale go without a discount that spoils your price for others.
What should the team write down after each call?
The date, who spoke, what was agreed, the next step and the date for it. Without those, the next person starts again from the beginning.
Do dealers and project buyers follow the same process?
They follow the same outline with different questions and different paperwork. A dealer wants lot availability and a price per slab; a project buyer wants a schedule, a delivery plan and a quantity. We write one sheet with a short branch for each, so the team does not carry two separate processes in their heads.
What if our salespeople do not follow the written steps?
We find out why. A step is skipped because it takes too long or the sheet does not match what buyers do. We shorten or change the step with the people who skipped it. The owner's job is to ask for the sheet to be used in the sales meeting, and to read the record that shows whether it is.
How long is the contract?
The term is agreed in writing after we have spoken, along with the fee and the reporting. It is never a default twelve months, and renewal is decided on the numbers against the baseline recorded at the start.
How soon will we see results?
It depends on the trade, the channel and what is already in place. After we have read your brief and spoken to you, we say what we would expect to move first and how it will be measured against the baseline. Nothing here is guaranteed.
What do you need from us?
Your brief, and a conversation. After that, access to whatever this work touches, such as your website, your accounts or your enquiry record, and time with the people who handle your enquiries.
What if we are not happy with the work?
Tell us and the plan changes. Everything is reported against the baseline, so a number that is not moving is visible to both sides. The term is in your written scope, and the refund and cancellation policy sets out the rest.

Your next practical step

Tell us what you are trying to grow, and we will read it before we call.

Eight short steps, mostly taps. Skip anything you would rather answer on the call.