Skip to content
GullySales

Hydraulic equipment manufacturers · Industrial product configurator and RFQ experience design

Let the engineer pick the cylinder and send a request your estimator can price.

A configurator and RFQ experience for a hydraulic maker is the path by which a design engineer or plant buyer narrows a cylinder, power pack or valve block to one variant and sends a request that can be priced. GullySales designs the selection steps, the specification fields and the route into your estimating desk.

Scope, fee, reporting and term are agreed in writing after we have read your brief and spoken to you.

Realistic editorial illustration of industrial equipment manufacturers at work in India

What industrial product configurator and RFQ experience design means

Product configurator and RFQ experience design is the plan for how a buyer selects a product variant on your website and asks for a quotation. GullySales designs the selection logic, the specification fields, the request form and the route into your sales team, then tests the whole path with real requests.

Last updated 14 Nov 2026.

For hydraulic equipment manufacturers

Where it usually goes wrong, and what we would do.

  • “A cylinder is chosen by a handful of numbers, not by a photograph”

    The design engineer holds bore, stroke, rod diameter, working pressure and mounting style in a drawing. A catalogue page that lists series names answers none of those questions. The buyer who cannot match the numbers to a model closes the tab and rings the shop that picks up the phone. Selection design asks for the facts in the order the engineer holds them, then shows which series can carry them. Your design engineer decides what each series can be built to do; we only arrange the questions.

  • “New build, repair and repeat order are three different requests”

    The press builder wants a new cylinder made to a drawing. The maintenance head holds a leaking unit with no drawing at all. The contractor wants the same part that was supplied last time. One form for all three produces an enquiry that suits none of them. The opening question separates the paths, and each path then asks for what the estimator needs: a drawing and a quantity, measurements and photographs of a worn unit, or the reference of the earlier order.

  • “A power pack is priced from a duty, not from a model code”

    Buyers of a power pack describe the machine and its job: the motor rating, the flow, the pressure setting, the tank size, the valve voltage and the cycle. Nobody types a model code that does not exist yet. A request built around the duty can be priced from a standard frame or passed to your design engineer with the facts already written down. A request built around a code is wrong before it is read.

  • “A missing unit costs the estimator a phone call”

    A pressure given with no unit, or a stroke given without saying whether it is the closed length or the working travel, forces a call before any number is written. Your estimator is also the works manager, so each call pulls attention away from the shop floor. Fields that name their unit and refuse an empty answer remove those calls at the source, and the form stays short because it asks only for what a quotation uses.

What we do

What we deliver for hydraulic equipment manufacturers.

The work available for this need. We agree the deliverables and responsibilities for your engagement in writing.

  1. Series and variant map

    A sheet listing each cylinder series, power pack frame and valve block with its options and the rules between them, such as which rod diameters belong to which bore and which seal compound suits which fluid. Your design engineer checks and signs every rule.

    Result: Every rule on the map carries your design engineer's initials.

  2. Three-path opening question

    The wording and layout of the first step, which sends a buyer down the new build, repair or repeat order path. Each path has its own short list of questions, written in the words a maintenance head or a design engineer would use.

    Result: A test buyer reaches the right path with a single choice.

  3. Cylinder specification field list

    The fields a cylinder request carries: bore, stroke, rod diameter, working pressure, mounting, port thread, cushioning and seal fluid. Each has a unit, permitted values and a note on why the estimator needs it. Fields nobody uses are removed.

    Result: Each field names the estimator who relies on it.

  4. Repair request sheet

    A guide to the measurements to take from a worn cylinder, the photographs that matter (rod, gland, nameplate and the leak itself) and a way to describe the fault. It is written for someone standing at the machine with a tape and a phone.

    Result: A maintenance head can complete it at the machine without calling anyone.

  5. Drawing and test report upload rules

    Which file types the form accepts, how a drawing is named and attached, and how a buyer asks for a test report or a sample. A drawing arrives joined to the request it belongs to, not lost in a shared inbox.

    Result: A drawing arrives attached to the request it belongs to.

  6. Routing table and confirmation page

    A written rule for who receives new build, repair, power pack and distributor requests, with cover when that person is away. The confirmation page repeats what the buyer sent and says what happens next, without a promised reply time.

    Result: Each request type has a named owner and a named cover.

How the result is measured

  • Selections started and completed, shown separately from requests submitted
  • Requests received with every required field complete
  • Requests the estimator could price without a further call

Recorded as a baseline before work starts, so every later report has an honest comparison.

Who it is for

This is written for these hydraulic equipment manufacturers.

  • Hydraulic cylinder makers and repairers
  • Hydraulic power pack and system builders
  • Valve, pump and motor assemblers for mobile and industrial use
  • Hydraulic hose, fitting and crimping houses
  • Hydraulic press makers for forging, sheet metal and rubber work
  • Seal kit and spares suppliers with a stocking business
  • Mobile hydraulics suppliers to tipper, crane and truck body builders
  • Job-work shops that machine rods, tubes and manifold blocks

Before you decide

Agree the work. Know how to judge it.

Industrial product configurator and RFQ experience design for hydraulic equipment manufacturers: use these checks to prepare, choose the scope, and review what changes.

Bring the right evidence

List the pages that support a buying decision and the actions visitors must complete. Keep examples of failed forms, unclear product information, and questions your team answers repeatedly.

Make the scope clear

Agree the page list, content ownership, integrations, and who controls the domain and hosting. Include redirects and existing search traffic in a redesign brief, before changing addresses.

Check the work in use

Complete a real enquiry journey on a phone and a laptop. Check that the confirmation appears, the enquiry reaches the right person, and tracking records the action once.

Know when to change course

If visitors can enquire but the team does not follow up, start with the sales handover. A larger website will not resolve that delay.

These are discussion points, not a fixed package. GullySales confirms the deliverables, responsibilities, fee, and term in writing after reading your brief and speaking with you.

Before we start

What to have ready before the work starts.

The records, access and decisions this work needs from hydraulic equipment manufacturers. Anything missing is noted in the written scope, with who will supply it.

Catalogue with series and options
The variant map is built from your real range, so we need each series, its options and the limits your engineers apply. A rough spreadsheet is enough. Without it the questions are guesses, and the first review with your design engineer will stop the work.
Recent priced quotations
Quotations show which details turned a request into a price and which were missing. Names can be removed. Without them the field list reflects opinion about what buyers send rather than what they actually send, and awkward cases stay hidden.
Worn-cylinder repair examples
A few repair requests, with the photographs and sketches that arrived, show what a maintenance head can and cannot measure. Include one that nobody could price. Without these, the repair sheet asks for numbers a buyer at the machine cannot supply.
A named estimator for incoming requests
The route into your shop needs a person who receives each request and a person who covers absence. A role is enough. Without an owner, the form is well designed and requests still wait unanswered while the estimator is on the shop floor.
Test reports and drawing templates
Buyers ask for proof before a first order, so a sample test report and your standard drawing format are needed. Share them with any customer details removed. Without them the upload rules and the sample request cannot be designed or tested.

How it works

How the industrial product configurator and RFQ experience design work runs

The work itself, in order. How an engagement starts, from your brief to a written scope, is set out on our method page.

  1. 1

    Range sheet and past quotations

    You send the requirements brief, the catalogue and a set of recent quotations. Reading the quotations beside the drawings shows which details your estimator always has to chase. GullySales writes the scope, fee and term before work starts, and lists what you will supply.

  2. 2

    Audit of real cylinder requests

    We read genuine requests and the replies that followed, sorted into new build, repair and repeat. We record how many needed a call back before they could be priced. That record is the baseline everything later is read against.

  3. 3

    Series rules checked by engineering

    We draft the variant map and the question order from the range sheet. Your design engineer corrects every rule, because a wrong compatibility rule in the design becomes a wrong rule in the finished tool. Nothing is drawn until the rules are approved.

  4. 4

    Screens for the phone and the desk

    Wireframes show the selection steps, the three paths and the confirmation for a phone beside a leaking press and a desktop in the design office. You approve the layout and the routing table, including who receives each type of request.

  5. 5

    Walk-through on old drawings

    Your estimator and one salesperson work through the design using drawings and repair sketches that were once awkward to price. Any request that cannot be completed, or cannot be priced from the fields, is corrected before the build brief is final.

  6. 6

    Live test against the baseline

    After your developer builds it, we send test requests of each type and record where each one landed. Later, the share of requests needing a call back is compared with the figure recorded in the audit. The result is read with your estimator, not assumed.

Where this fits

Three pieces of sales work, in this order.

This work sits inside sales process design, at stage 1, prospecting and lead generation. The audit comes before it, and sales management keeps it running.

  1. Step 1

    Sales audit

    Find where deals are being lost and what to fix first.

    Start here if you cannot say where orders are lost.

  2. Step 2 · you are here

    Sales process design

    One written way to sell, from first enquiry to repeat order.

    Start here if every salesperson sells differently.

  3. Step 3

    Sales management

    A target, a review routine and someone who owns the number.

    Start here if the team has targets and no routine.

Tell us what you need Your brief is read before we call. Scope, fee and term in writing.

FAQ

Questions owners ask before they call.

Not here? More answers, or ask on WhatsApp.

Do we need a full configurator that calculates a price?
No. Some makers need only a clear selection path and a request that carries the right facts. Live price calculation and generated drawings are software development, scoped separately. The design from this work is the brief such a tool would be built from, so nothing is wasted if you build it later.
Can a buyer send a paper sketch of a worn cylinder?
Yes. The repair path is built for a photograph of the sketch and of the unit itself, plus a few measurements. The sheet tells the buyer which measurements matter. Your estimator then reads a sketch and a nameplate photograph together instead of guessing from a one-line message.
Who decides which combinations of bore, rod and mounting are allowed?
Your design engineer decides, every time. GullySales structures the rules and lists them for approval, but never decides what your cylinders can be built to do. A rule is recorded only after your engineer has checked it, and rules can be changed whenever the range changes.
Will this work for custom builds only, with no standard range?
Yes, though the selection logic is shorter. The design then concentrates on the request: the duty, the drawing, the quantity and the mounting. Custom requests are routed straight to your design engineer with the facts already written down, so the first call is about the design and not about missing details.
Does it bring more enquiries to the shop?
That is not promised. The design makes a request easier to send and easier to price, and it removes calls spent chasing missing facts. Whether more enquiries follow depends on your range and your visibility. Results are read against the baseline recorded in the audit, with your own estimator.
What happens to requests from distributors and dealers?
They get a route of their own. A distributor knows the part and wants availability, while an end buyer wants help choosing. The routing table sends each to the right person, so a dealer asking for a seal kit does not wait behind a design enquiry for a power pack.
How long is the contract?
The term is agreed in writing after we have spoken, along with the fee and the reporting. It is never a default twelve months, and renewal is decided on the numbers against the baseline recorded at the start.
How soon will we see results?
It depends on the trade, the channel and what is already in place. After we have read your brief and spoken to you, we say what we would expect to move first and how it will be measured against the baseline. Nothing here is guaranteed.
Who will actually do the work?
The person you speak to before anything starts. We work from one office in Nagarbhavi, Bengaluru, with no account managers in between.
What do you need from us?
Your brief, and a conversation. After that, access to whatever this work touches, such as your website, your accounts or your enquiry record, and time with the people who handle your enquiries.

Your next practical step

Tell us what you are trying to grow, and we will read it before we call.

Eight short steps, mostly taps. Skip anything you would rather answer on the call.