Knitting units · Website
Give the merchandiser a site that answers GSM, yarn and finish in one visit.
A website for a knitting unit is a set of fabric pages, a swatch request route and a clear picture of the unit, built so a garment maker can judge you without a call. GullySales plans and writes the pages, and your team confirms every technical figure.
Scope, fee, reporting and term are agreed in writing after we have read your brief and spoken to you.

What website means
A website is the page a customer lands on after searching, clicking an advert or scanning a code, and it decides whether they call or leave. GullySales builds and maintains sites that load quickly, explain the offer plainly and make the enquiry form or phone number easy to find.
Last updated 14 Nov 2026.
For knitting units
Where it usually goes wrong, and what we would do.
“A brochure site does not answer a technical buyer”
A home page with a factory photograph and a contact form leaves out what the merchandiser needs. Construction, GSM range, yarn, blend and finish decide whether they ask for a swatch.
“The swatch request form should ask the right questions”
A form asking only for name and phone returns messages nobody can quote. One that asks fabric, GSM, quantity and end garment gives the sales desk enough to reply properly.
“Proof of a real unit calms a cautious buyer”
Photographs of the machines, the checking table and the dye partner, with a stated location, tell a sourcing team the unit exists and works. Anonymous sites lose to ones that show their floor.
“A phone-first layout matters in this trade”
Merchandisers open links from chats on their phones. A page that needs pinching and scrolling sideways is closed. Fabric tables and photographs must read on a small screen.
What we do
What we deliver for knitting units.
The work available for this need. We agree the deliverables and responsibilities for your engagement in writing.
Fabric pages by construction
One page for each fabric with GSM range, yarn, finish, end use and a swatch request button.
Result: A link to send for any fabric enquiry.
A swatch request form with fabric fields
Fields for construction, GSM, blend and quantity, feeding your enquiry record.
Result: Each request arrives ready to quote.
A unit page with machines and process
Machine types, process steps and location shown with real photographs.
Result: A buyer can see what stands behind the fabric.
Test-report access
Shrinkage and fastness details shown or available on request for each fabric.
Result: The buyer's first test question is answered on the page.
Phone-checked layout
Every page tested on a small screen before it goes live.
Result: Pages open cleanly from a WhatsApp link.
How the result is measured
- Page load time
- Bounce rate
- Enquiries from the website
Recorded as a baseline before work starts, so every later report has an honest comparison.
Searches your buyers type
Build pages that answer these specification searches and take a swatch request.
- 280 GSM fleece fabric lot size
- A fleece page stating the weights, brushing options and minimum lot, with the swatch form beneath it.
- cotton lycra rib fabric specification
- A specification page showing yarn, elastane, gauge and recovery, laid out as a table a merchandiser can copy.
- knitting unit machine list
- A unit page listing machine types, diameters and gauges, with photographs of the floor, which tells a buyer what you can run.
- fabric test report shrinkage fastness
- A page or request route for the reports you hold, with dates, so a buyer can check before writing.
- request knit fabric swatch
- A form that asks for GSM, yarn, quantity and the garment, and sends a swatch card, reducing the back and forth that follows.
- job work knitting terms
- Explains what yarn lots and programme details you need before quoting, so a job-work enquiry arrives complete.
Who it is for
This is written for these knitting units.
- Circular knitting units making single jersey, rib and interlock
- Fleece and terry fabric knitters
- Flat knitting units for sweaters, collars and cuffs
- Warp knitting units for lace, net and technical fabric
- Job-work knitters who knit customers' yarn
- Hosiery and sock knitting units
- Knitters supplying sportswear and activewear fabric
- Units that knit and also dye, in a composite knit-and-process set-up
Before you decide
When this may not be the right fit.
- You do not hold a single test report you can show, so a report page would be empty where the buyer looks first.
- Nobody collects swatch requests from the site each day, so a form would gather names while buyers wait for the post.
Before you decide
Agree the work. Know how to judge it.
Website for knitting units: use these checks to prepare, choose the scope, and review what changes.
Bring the right evidence
List the pages that support a buying decision and the actions visitors must complete. Keep examples of failed forms, unclear product information, and questions your team answers repeatedly.
Make the scope clear
Agree the page list, content ownership, integrations, and who controls the domain and hosting. Include redirects and existing search traffic in a redesign brief, before changing addresses.
Check the work in use
Complete a real enquiry journey on a phone and a laptop. Check that the confirmation appears, the enquiry reaches the right person, and tracking records the action once.
Know when to change course
If visitors can enquire but the team does not follow up, start with the sales handover. A larger website will not resolve that delay.
These are discussion points, not a fixed package. GullySales confirms the deliverables, responsibilities, fee, and term in writing after reading your brief and speaking with you.
Before we start
What to have ready before the work starts.
The records, access and decisions this work needs from knitting units. Anything missing is noted in the written scope, with who will supply it.
- Domain and hosting login
- Whoever bought the domain controls where the address points, and the launch depends on it. We need the registrar login or the person who holds it. If a former developer holds it, recovering it comes first, and if it cannot be recovered, a new address is the only route and old links will need redirecting from the old site.
- A fabric sheet with every figure confirmed
- GSM ranges, widths, yarns and finishes must come from production and not from guesswork, because a wrong figure on a page costs you a swatch and the buyer's trust. A spreadsheet is enough. Where a figure changes with the lot, give the range, and we word the page to say so.
- Test reports you are willing to display
- Mark which shrinkage, spirality and fastness reports can be shown and remove buyer names and labels from them. Without reports, the pages describe the checks you carry out but cannot show results, which leaves the technical buyer to ask for them by phone on the first call.
- Photographs of the machines and the floor
- Daylight photographs of the machines, the inspection table and the fabric rolls make the unit page credible. If you have none, we arrange a visit, but that adds a step before the test site can be shown to you, and the page waits for the pictures.
- The person who receives swatch requests
- A named person and a back-up must open every form and reply. If the form goes to an unwatched inbox or the owner's old email, the key button of the site fails without anyone noticing. Name both people and check that the address works before the launch.
How it works
How the website work runs
The work itself, in order. How an engagement starts, from your brief to a written scope, is set out on our method page.
- 1
Spend an hour at the sample table
We begin where the swatches are cut and labelled, with the sales head and the production head beside us. We note what a visiting merchandiser touches, asks and checks first, and what they carry away. That list becomes the content of each page. You decide the constructions the site will describe in depth and those it will only list, so the pages follow your machines and not a catalogue.
- 2
List the old site's pages and who holds them
We inventory the pages, forms and email on the present site and find who holds the domain and the hosting. You tell us what must stay, such as a page a buyer has bookmarked. What exists is a plain list and a decision, made with you, between repairing the old site and building a new one.
- 3
Draw the route from search to swatch request
We sketch the pages a merchandiser passes through: the fabric, the construction page, the unit page, the test details and the swatch request. You approve this map before any design begins. A page that exists only because other knitters' sites have one is left out, and a page a buyer needs is added even if no competitor has it.
- 4
Write the fabric pages with the production head
We write each construction page from the production head's account, with GSM range, width, yarn and finish, and your people confirm each figure. The swatch form asks for construction, GSM, quantity and intended use. All of it sits on a hidden test site, which you and the sales head read on your own phones before anything is public.
- 5
Photograph the unit and its machines
A photographer or your own staff take pictures of the machines running, the inspection table, the fabric rolls and the building. You approve each picture and strike any buyer label. A buyer who sees a working floor trusts the page more than one with stock images, and the unit page can then describe the process in your own words.
- 6
Launch, test on phones and hand over
We agree which old addresses must lead to the new pages and who receives each form. We launch with the sales desk present, send a swatch request from a basic phone on a slow connection and hand over the logins and an editing guide. We then read the first enquiries against the record you kept before the launch.
Where this fits
Three pieces of sales work, in this order.
This work sits inside sales process design, at stage 1, prospecting and lead generation. The audit comes before it, and sales management keeps it running.
Step 1
Sales audit
Find where deals are being lost and what to fix first.
Start here if you cannot say where orders are lost.
Step 2 · you are here
Sales process design
One written way to sell, from first enquiry to repeat order.
Start here if every salesperson sells differently.
Step 3
Sales management
A target, a review routine and someone who owns the number.
Start here if the team has targets and no routine.
FAQ
Questions owners ask before they call.
Not here? More answers, or ask on WhatsApp.
Must the knitting unit's old website be replaced, or can it be repaired?
Should the site list our buyers?
Who updates the site after launch?
Should the site show machine details?
Must the old website be replaced, or can it be repaired?
Should the site show the garment makers we supply?
How much does it cost?
How long is the contract?
How soon will we see results?
Who will actually do the work?
More for knitting units
Related work to consider.
Closest to this: search and visibility
Also for knitting units
Or start from the overview: sales and marketing for knitting units.
Your next practical step
Tell us what you are trying to grow, and we will read it before we call.
Eight short steps, mostly taps. Skip anything you would rather answer on the call.