Skip to content
GullySales

MDF manufacturers · CRM

Keep every factory, dealer and sample in one record your whole team can read.

A CRM for an MDF manufacturer is a shared record of factories, workshops, dealers, designers and importers, with the board each uses and the samples sent. GullySales sets up the fields, the stages and the habit of writing things down, so a test does not vanish when a salesperson leaves.

Scope, fee, reporting and term are agreed in writing after we have read your brief and spoken to you.

A stockroom worker checks sheets of MDF, plywood and particle board

What CRM means

A CRM is the record where every enquiry, call and quote is kept against a customer, replacing separate notebooks, spreadsheets and memory. GullySales sets up or cleans an existing CRM and reports from it by enquiry outcome rather than by activity logged.

Last updated 14 Nov 2026.

For MDF manufacturers

Where it usually goes wrong, and what we would do.

  • “The account lives in a phone and a notebook”

    Sales staff hold factory contacts, board preferences and sample dates privately. When that person changes jobs or goes on leave, the relationship is gone. With a shared record, the account history stays when the person leaves.

  • “Samples need a stage of their own”

    A sample sent, a sample cut and a result collected are three different points. Without those stages, a factory that passed the test sits in the same list as one that was never called.

  • “Dealer and end buyer must be linked”

    A workshop buys through a dealer, and both matter. A record that links the carpenter to the dealer shows who supplies whom and where support is needed.

  • “Batch and complaint belong on the account”

    When a complaint arrives, the team needs the board, batch and thickness at once. If those sit in another file, the first reply is a delay and the buyer notices.

What we do

What we deliver for MDF manufacturers.

The work available for this need. We agree the deliverables and responsibilities for your engagement in writing.

  1. Account and contact fields

    Fields for unit type, board in use, quantity band, delivery area and decision maker.

    Result: Any salesperson can open an account and know the buyer.

  2. Sample and test stages

    Stages from sample sent to test done to order placed, each with a date and owner.

    Result: You can list factories that tested and have not yet been called.

  3. Dealer link and workshop list

    A link between each workshop and the dealer it buys through.

    Result: You can see every workshop under a dealer.

  4. Complaint log tied to account

    A form with batch, thickness, photographs and the person handling.

    Result: A complaint opens with the batch already on the screen.

  5. Reorder reminders

    A date set for each account's next likely purchase, with a task for the owner.

    Result: The team sees who is due a call today.

How the result is measured

  • Enquiries logged in the CRM
  • Data completeness
  • Reports generated from CRM data

Recorded as a baseline before work starts, so every later report has an honest comparison.

Fields worth keeping

The fields an MDF plant needs on each factory, workshop and dealer.

Board type and thickness bought
Sales staff update it at each order. It lets the reorder call name the exact board and not guess.
Sample sent and date
Dispatch fills it. It starts the post-sample call and shows how long a test has been open.
Test result and who judged it
The sales person records what the buyer said. It becomes the argument in the quote, whether passed, failed or unclear.
Dealer who serves the workshop
Filled when the account is created. It credits the dealer and keeps two of your people from approaching one workshop.
Batch number on last delivery
Dispatch adds it. A complaint about edge swelling can then be traced to one batch.
Credit limit and payment history
Accounts staff maintain it. It stops a salesperson promising terms the plant has not approved.

Who it is for

This is written for these MDF manufacturers.

  • Plain MDF producers for furniture factories
  • Pre-laminated MDF and prelam board makers
  • HDHMR and moisture-resistant board producers
  • Fibreboard makers supplying door and moulding factories
  • Thin MDF and HDF producers for flooring and door skins
  • MDF units supplying packing, speaker and craft markets
  • Export-focused MDF manufacturers
  • MDF processors that offer cut-to-size and edge-banded panels

Before you decide

When this may not be the right fit.

  • Your accounts, dispatch and sales each keep a separate book and nobody has agreed one account name, so a shared system would start with three versions of one factory.
  • The sales team is small and meets the owner every day, so a tool would add typing without adding anything the owner does not already know.
  • You expect the system to chase payments and reorders by itself, though no one has set the rule for when.

Before you decide

Agree the work. Know how to judge it.

CRM for MDF manufacturers: use these checks to prepare, choose the scope, and review what changes.

Bring the right evidence

List the records your team uses and show how an enquiry becomes an order today. Bring examples of duplicate entries, missing owners, and reports that require manual correction.

Make the scope clear

Agree the stages, required fields, access roles, and integrations before configuring the system. Separate software subscriptions from setup, data work, and training.

Check the work in use

Ask the people who will use the CRM to complete a real handover and find the next action without help. Check that the management report can be traced back to individual records.

Know when to change course

If the process is unclear, buying a more complex CRM adds more places for confusion. Start with the minimum fields and rules the team can use consistently.

These are discussion points, not a fixed package. GullySales confirms the deliverables, responsibilities, fee, and term in writing after reading your brief and speaking with you.

Before we start

What to have ready before the work starts.

The records, access and decisions this work needs from MDF manufacturers. Anything missing is noted in the written scope, with who will supply it.

Every list of accounts in use
Notebooks, spreadsheets and phone contacts, however poor. We combine them. Without them we start empty, and accounts that live only in a salesperson's head are lost when they leave.
A territory sheet of salespeople and towns
Who covers which towns and which dealers. It sets ownership in the record. If missing, the first record has no owner rule, and two people may call the same workshop.
A decision on who sees dealer terms
The owner must say which roles see dealer margins and special terms. Without a decision, we hide them from all but the owner and the sales head.
Complaint and batch records
Whatever you hold on batches and complaints, tied to the customer where possible. They are linked to the accounts. If absent, the field is created empty and filled from now on. Where batch numbers were never written down, we start from the dispatch date instead.
Time from each salesperson for the trial
A protected stretch for each salesperson to test the system. If they cannot give it, the system is accepted untested and old habits return.

How it works

How the CRM work runs

The work itself, in order. How an engagement starts, from your brief to a written scope, is set out on our method page.

  1. 1

    Collect the notebooks and phone contact lists

    We ask each salesperson for the notebook, the spreadsheet and the phone contacts they use for accounts. You tell us which of them are real accounts and which are dead. We combine them into one list, mark duplicates and keep every name under your control. What exists afterwards is a first honest list of factories, workshops, dealers and designers.

  2. 2

    Walk the path from sample to reorder

    With your sales head we draw the path an account takes: a first call, a sample, a test, a quotation, an order, a reorder. You mark where accounts really stall, at the test. The stages are named in your words, and sample and test get stages of their own. The drawing is approved by the sales head.

  3. 3

    Set the fields for account, dealer and batch

    We list what each record must hold: the unit, the contact, the board in use, the dealer it buys through, and the batch and complaint history. You cut any field nobody would fill in. A dealer is linked to the workshops it supplies. The field list is signed off before anything is entered into the system.

  4. 4

    Load a trial set and let salespeople break it

    We load a small set of real accounts into a test version. Each salesperson finds their own accounts and tells us what is wrong or missing, and we check that two people cannot own the same workshop. You decide when the trial is good enough. Real data is not loaded until the stages hold.

  5. 5

    Connect sample forms, complaints and reminders

    We connect the sample request form so a request becomes a record with a source. The complaint log is tied to the account, and reorder reminders are set against the board and the last order. We test each route with a made-up account. Anything that fails is fixed before salespeople rely on it. We also check that a complaint raised against a batch number shows up on every account that received that batch.

  6. 6

    Switch over and read the first reports

    On the agreed day the notebooks close and the system becomes the record. After the first stretch of use, we read the stage report beside the figures recorded before the work, and you tell us which accounts you did not know were open. Stages that are never used are merged, and the access rules are rechecked.

Where this fits

Three pieces of sales work, in this order.

This work sits inside sales management. A target, a review routine and someone who owns the number.

  1. Step 1

    Sales audit

    Find where deals are being lost and what to fix first.

    Start here if you cannot say where orders are lost.

  2. Step 2

    Sales process design

    One written way to sell, from first enquiry to repeat order.

    Start here if every salesperson sells differently.

  3. Step 3 · you are here

    Sales management

    A target, a review routine and someone who owns the number.

    Start here if the team has targets and no routine.

Tell us what you need Your brief is read before we call. Scope, fee and term in writing.

FAQ

Questions owners ask before they call.

Not here? More answers, or ask on WhatsApp.

Do we need special software?
Not at first. A simple tool with the right fields, used by everyone, beats an expensive one used by nobody. We choose with you and set up what your team will actually fill in.
Who should have access?
Sales, technical and dispatch staff each need to see different parts. We set roles so a dealer's rate is not visible to everyone and the whole team still sees test and complaint history.
How do we avoid two salespeople calling the same workshop?
Give every account one owner in the record and let the dealer be a field, not a second owner. Overlap starts when ownership is unclear, so settle by territory or by dealer before the account is added.
Can a CRM track batch complaints?
Yes, if dispatch enters the batch number at delivery and the complaint is logged against the account. A pattern in one batch then becomes visible, which gives your plant something specific to take to production.
Can salespeople use the CRM from the road on a phone?
Yes, if the tool you choose has a phone app or a mobile page, and if the fields are short enough to fill from a workshop door. We keep the sample and call forms to a few taps and test them with your salespeople on their own phones. Poor mobile signal in the field is common, so we check how the tool behaves when a note is saved without a connection. If it fails, we change the form, not the habit.
What happens to the old notebooks after the switch?
Keep them as an archive for a set period, but stop writing in them. Before closing, someone enters any account still open into the system and marks the rest as old. We help with a one-time sweep with each salesperson, and then set a date after which the notebook is not a valid record. Keeping both alive splits the truth, and a customer rings the person who has the notebook, not the system.
How much does it cost?
There is no price list, because the work differs by business. The fee is scoped after we have read your brief and spoken to you, and put in writing before anything starts, split into our time, your media spend and production.
How long is the contract?
The term is agreed in writing after we have spoken, along with the fee and the reporting. It is never a default twelve months, and renewal is decided on the numbers against the baseline recorded at the start.
How soon will we see results?
It depends on the trade, the channel and what is already in place. After we have read your brief and spoken to you, we say what we would expect to move first and how it will be measured against the baseline. Nothing here is guaranteed.
Who will actually do the work?
The person you speak to before anything starts. We work from one office in Nagarbhavi, Bengaluru, with no account managers in between.

Your next practical step

Tell us what you are trying to grow, and we will read it before we call.

Eight short steps, mostly taps. Skip anything you would rather answer on the call.