Mould manufacturers · Website
A mould maker's website should let a buyer judge the toolroom without a call.
A website for a mould maker is the place where a product head or moulder checks your moulds, steels, machines and review process before sending a model. GullySales works on page structure, technical detail and an enquiry form that collects what the design team needs.
Scope, fee, reporting and term are agreed in writing after we have read your brief and spoken to you.

What website means
A website is the page a customer lands on after searching, clicking an advert or scanning a code, and it decides whether they call or leave. GullySales builds and maintains sites that load quickly, explain the offer plainly and make the enquiry form or phone number easy to find.
Last updated 14 Nov 2026.
For mould manufacturers
Where it usually goes wrong, and what we would do.
“Plastic moulds is not a page”
One page listing every mould leaves the buyer guessing whether you have built a lid or a bumper. Separate pages by mould type let the buyer find the closest example.
“The machine list is evidence”
CNC, EDM, grinders and try-out presses show that you build and test in-house. A bare list of names tells the buyer little. State what each does for the mould and the size range it takes.
“Proof must be checkable”
A gallery of moulds with captions naming part type, steel and cavity count lets a buyer compare. Stock images of factories say nothing; photographs of your floor and your moulds do.
“The form is the finish”
A buyer who decides to send a model meets a contact form asking for a name and a message. Ask for the model, material and cavity count, and allow files. Nothing else on the site matters if that form fails on a phone.
What we do
What we deliver for mould manufacturers.
The work available for this need. We agree the deliverables and responsibilities for your engagement in writing.
Site structure
A map of pages by mould type, review process, repair, gallery, machines and contact.
Result: A page list the owner approves before any writing starts.
Mould type pages
Pages with part type, tonnage, steel, cavity counts and photographs.
Result: Each page answers whether you have built something close.
Review process page
A page explaining the design review, with a sample sheet.
Result: A buyer sees what the review delivers.
Machine and try-out page
Each machine named with what it does and the size range it takes.
Result: Capacity can be read and checked.
Enquiry form
A form asking for model, material, cavity count and launch date, with a file upload that works on a phone.
Result: A test enquiry sent from a phone arrives complete.
How the result is measured
- Page load time
- Bounce rate
- Enquiries from the website
Recorded as a baseline before work starts, so every later report has an honest comparison.
Searches your buyers type
Pages a mould buyer looks for before sending a model.
- injection mould manufacturer with try-out machines
- A machine and try-out page listing presses by tonnage, what each runs and whether small lots are possible.
- mould design review before steel cutting
- A review process page describing what the engineers check and the sheet the buyer receives afterwards.
- mould maker gallery with parts
- A gallery page of moulds beside moulded parts, captioned with steel and cavity count.
- what is included in a mould quote
- A page setting out the quote lines, so a buyer can read your price against a rival's.
- send part model to mould maker
- The enquiry form page: file upload, material, cavity count, launch date and the buyer's role.
- mould export steel certificate try-out report
- An export page naming the steel certificates, the try-out report and the crate that go with a mould.
Who it is for
This is written for these mould manufacturers.
- Mould makers for packaging and thin wall containers
- Auto interior and exterior component mould makers
- Appliance and electrical housing mould makers
- Consumer product and toy mould makers
- Mould makers with hot runner and multi-cavity capability
- Mould makers serving medical and lab disposables
- Mould makers who also offer mould repair and modification
- Mould makers with in-house try-out machines and small lot moulding
Before you decide
When this may not be the right fit.
- You have no photographs of any past mould, so a gallery and type pages would stand empty and the site would look no different.
- The toolroom cannot yet say which presses it uses for try-out, and a machine page without that is the page buyers check first.
Before you decide
Agree the work. Know how to judge it.
Websites for mould manufacturers: use these checks to prepare, choose the scope, and review what changes.
Bring the right evidence
List the pages that support a buying decision and the actions visitors must complete. Keep examples of failed forms, unclear product information, and questions your team answers repeatedly.
Make the scope clear
Agree the page list, content ownership, integrations, and who controls the domain and hosting. Include redirects and existing search traffic in a redesign brief, before changing addresses.
Check the work in use
Complete a real enquiry journey on a phone and a laptop. Check that the confirmation appears, the enquiry reaches the right person, and tracking records the action once.
Know when to change course
If visitors can enquire but the team does not follow up, start with the sales handover. A larger website will not resolve that delay.
These are discussion points, not a fixed package. GullySales confirms the deliverables, responsibilities, fee, and term in writing after reading your brief and speaking with you.
Before we start
What to have ready before the work starts.
The records, access and decisions this work needs from mould manufacturers. Anything missing is noted in the written scope, with who will supply it.
- Domain and hosting login details
- Provide the registrar and hosting logins, or the name of the person who holds them. A launch cannot happen without them. If an old vendor controls the domain, recover it first, because a site built on a domain you do not control can be taken from you.
- Machine and try-out press list
- Prepare a list of machining centres, erosion units, grinders and try-out presses with makes and capacities. Buyers read this as proof that the shop can do the work. A list with gaps leads to a page that says too little, and we will not guess a machine's size. Include the inspection instruments and the steel stock you hold, because buyers read those lines as signs of control over the build.
- Mould photographs with permission
- Supply photographs of moulds, the toolroom and the try-out, with written permission wherever a customer's part is visible. Stock images of factories are not used. With few photographs the pages rely on drawings of your own process, which is acceptable but less persuasive.
- The design review steps as you run them
- Write down what happens from the model arriving to the review call: who looks at it, what is checked and what the buyer receives. The review process page describes it. If the steps are not fixed, we ask you to settle them first, since a page cannot promise a process that varies by day.
- A named person for the enquiry form
- Choose who receives form submissions and who replies when they are away. The form is the point of the site. Without a named person, models sit unseen, and the cost of the new site shows up as silence from buyers who sent their files.
How it works
How the website work runs
The work itself, in order. How an engagement starts, from your brief to a written scope, is set out on our method page.
- 1
Settle the job the site does for a buyer
We start with the owner and sales head and list the decisions a product head or moulder makes on the site: whether the shop can build the mould, whether it has the machines, and how to send a model. You say which jobs carry the greatest weight. The outcome is a written scope with the pages and the form, so the build does not grow beyond what was agreed.
- 2
Collect the content, the access and the images
We take the machine list, steel and hot runner details, the mould photographs and the review process, together with the domain and hosting logins. You mark what is confidential. What exists afterwards is a content folder and a list of what is still missing, so nothing is invented to fill a page. We also ask for the certificates the shop holds, such as a quality system certificate, and the names of the measuring instruments in the inspection room, since a technical buyer looks for both.
- 3
Draw the sitemap and the page layouts
We sketch the pages, one for each mould type, plus the review process, machines and try-out, and the enquiry form. You and the design head approve the structure on paper before any design is made. Each page is given a single next step: sending the model.
- 4
Build the test site and read the technical lines
We build the pages on a test address with your content, and the design head reads every technical line, from steel grades to press tonnage. You confirm the images may be shown. Errors are fixed here, since a wrong tonnage on a live page is noticed by the first engineer who reads it. The inspection room manager checks the lines on measurement and tolerance, because a buyer who reads those lines will compare them with the sample report.
- 5
Try the form with real models, then go live
We submit three real past models through the form, on a phone and a computer, and check that the right person receives them with the details. You approve the launch. The old site is redirected so existing links still work.
- 6
Check the live pages and hand over the keys
We confirm the live pages, forms and tracking work, give you the logins and a note on editing a page, and record the enquiry count from the form and phone line. You compare these with the figures from before. The site is then yours to run.
Where this fits
Three pieces of sales work, in this order.
This work sits inside sales process design, at stage 1, prospecting and lead generation. The audit comes before it, and sales management keeps it running.
Step 1
Sales audit
Find where deals are being lost and what to fix first.
Start here if you cannot say where orders are lost.
Step 2 · you are here
Sales process design
One written way to sell, from first enquiry to repeat order.
Start here if every salesperson sells differently.
Step 3
Sales management
A target, a review routine and someone who owns the number.
Start here if the team has targets and no routine.
FAQ
Questions owners ask before they call.
Not here? More answers, or ask on WhatsApp.
Should we show our customers' names?
How many pages do we need?
Does the site need export information?
Can we show a mould we built under confidentiality?
Can we keep the pages we already have?
Who updates the site when we buy a new machine?
How much does it cost?
How long is the contract?
How soon will we see results?
Who will actually do the work?
More for mould manufacturers
Related work to consider.
Closest to this: search and visibility
Also for mould manufacturers
Or start from the overview: sales and marketing for mould manufacturers.
Your next practical step
Tell us what you are trying to grow, and we will read it before we call.
Eight short steps, mostly taps. Skip anything you would rather answer on the call.