Skip to content
GullySales

Natural stone manufacturers · Follow up systems

Call after the sample box lands, because that is when the designer has an opinion.

A follow-up system for a natural stone manufacturer is the set of calls, messages and reminders that carry a sample, a quotation or a project from first contact to a decision. GullySales works on who follows up, when a reminder fires and what gets written down afterwards.

Scope, fee, reporting and term are agreed in writing after we have read your brief and spoken to you.

A builder and supervisor inspect paving blocks in a materials yard

What follow up systems means

A follow-up system is the set routine for calling, messaging or emailing an enquiry more than once, since most buyers do not decide on the first conversation. GullySales sets the number and timing of follow-ups so an undecided buyer keeps hearing from you until they decide either way.

Last updated 14 Nov 2026.

For natural stone manufacturers

Where it usually goes wrong, and what we would do.

  • “The call after the sample box is the one that matters”

    A designer opens the box, holds the stone to daylight and forms a view within a day or two of arrival. A call at that moment gets an opinion, while a call weeks later gets a vague memory.

  • “Quotations go quiet without an owner”

    A quote sent to a builder's purchase team sits in an inbox. Without a named person and a set next step, nobody asks whether it was read, and the project is awarded elsewhere.

  • “A lost project still holds information”

    A designer who chose another stone can say why, whether price, shade, size or timing. That reason is worth recording, because it shows what to change before the next specification.

  • “Repeat buyers are forgotten by success”

    A contractor who ordered cobbles last season is easy to leave alone because they were happy. A short check before the next season keeps the order from drifting to whoever called first.

What we do

What we deliver for natural stone manufacturers.

The work available for this need. We agree the deliverables and responsibilities for your engagement in writing.

  1. A follow-up rule for every sample box

    A call assigned to a named person when a box is marked as delivered, with a few questions to ask.

    Result: Every box that arrives gets a call.

  2. A quotation follow-up routine

    A set of next steps after a quote, including who calls, what is asked and when the project is marked won, lost or on hold.

    Result: Each quote has an owner and a next step.

  3. Reminders inside the record

    Reminders attached to samples, quotes and repeat accounts so they appear without anyone remembering.

    Result: Nothing relies on memory alone.

  4. A reasons-lost list

    A short fixed list of reasons a project went elsewhere, filled in whenever a project closes.

    Result: You can see why stone was lost, not only that it was.

  5. A season check for repeat contractors

    A prompt before each buying season to call contractors who bought earlier.

    Result: Repeat accounts hear from you before they need stone.

How the result is measured

  • Follow-up completion rate
  • Average number of follow-ups before close
  • Enquiries closed after repeat follow-up

Recorded as a baseline before work starts, so every later report has an honest comparison.

What to capture or send

Stone follow-up hangs on the sample box and the quotation.

Sample box dispatch note
Send with the box contents and a line saying you will call once it has been seen, so the call is expected and not cold.
Call after the box lands
Ask what the designer thought of the colour and finish, and record the answer. It is the point at which an opinion forms.
Quotation with the lot and finish stated
Send the quote with stone, finish, thickness, lot and delivery terms spelled out, so the buyer compares like with like.
Check before the specification closes
A message to the architect asking whether the stone is named in the schedule, sent before the drawings are frozen.
Reason-lost entry
When a project goes elsewhere, record why in a fixed list and keep the contact, because the same practice may specify again.

Who it is for

This is written for these natural stone manufacturers.

  • Sandstone producers and processors
  • Kota stone and limestone cutting units
  • Slate and quartzite producers and wall cladding suppliers
  • Cobble, paver and kerbstone producers
  • Shahabad and other regional stone processors
  • Stone cladding and ledge panel manufacturers
  • Garden stone, boulder and outdoor feature stone suppliers
  • Export-led natural stone processors

Before you decide

When this may not be the right fit.

  • You send samples without recording who received them, so no one knows whom to call.
  • Your quotations carry no stated lot or finish, and a follow-up would only argue over what was offered.
  • Salespeople move on and hold the contacts personally, so reminders would follow the person, not the project.

Before you decide

Agree the work. Know how to judge it.

Follow-up systems for natural stone manufacturers: use these checks to prepare, choose the scope, and review what changes.

Bring the right evidence

Trace recent enquiries from arrival to the last recorded action. Include a won enquiry, an unsuitable one, and one that went quiet, with personal details removed for the initial discussion.

Make the scope clear

Agree who accepts each enquiry, what makes it qualified, and how ownership changes. Include a rule for missed replies and a clear reason for closing an enquiry.

Check the work in use

Pick an enquiry at random and ask the team to find its owner, latest conversation, and next action. Check that the record agrees with what actually happened.

Know when to change course

If no one has capacity to respond, assign that responsibility before buying more leads. Automation can support the owner, but it cannot replace an unresolved handover.

These are discussion points, not a fixed package. GullySales confirms the deliverables, responsibilities, fee, and term in writing after reading your brief and speaking with you.

Before we start

What to have ready before the work starts.

The records, access and decisions this work needs from natural stone manufacturers. Anything missing is noted in the written scope, with who will supply it.

A list of open sample boxes
Bring the boxes sent with no known outcome, with the contact, the stone and finish, the date and the project. This is the first list we work from, and some boxes on it may still be worth a call. If the list is unavailable, we begin with the next box dispatched, and the first review comes later than it otherwise would.
All open quotations with dates
Gather quotations still awaiting an answer, with the date sent, the contact, the quoted stone and the quantity. They show where follow-up lapsed and which buyers went quiet after a rate was named. Without them, the routine starts with new quotations only, and older ones stay unexamined.
Names of the people who will call
Tell us which salespeople own which accounts, which region each covers and who covers absences or a resignation. A reminder against no name is ignored, and a reminder against a person on leave is worse. We write the owner and the cover into every rule, so a box never has two owners or none, and a call missed on one day is passed on and not forgotten.
A decision on pricing for lost projects
Only you can say whether the company reopens a lost project with a revised rate, and under what limit on discount a salesperson may do so alone. Write the rule down. Without it, salespeople will either never reopen a lost project or reopen at random, and the reasons-lost list teaches the company very little about price.
A list of repeat contractors
Name the contractors and builders who buy again each building season. We prepare a check on them before the season turns, so they hear from you before a competitor's salesperson reaches them. Add the stones each one bought and the sites. Without a list, repeat buyers are found from the quotation file, which is slower and misses those who ordered by phone.

How it works

How the follow up systems work runs

The work itself, in order. How an engagement starts, from your brief to a written scope, is set out on our method page.

  1. 1

    List the sample boxes still waiting

    We begin with the boxes sent in the past season that have no recorded outcome, and ask the sales team who made the last contact on each. You decide which are worth a call now. What exists afterwards is a first working list, and a picture of how follow-up currently happens.

  2. 2

    Agree what happens after a box leaves

    With the sales head, we write the rule for a sample box: who calls once it arrives, what they ask about the stone, the finish and the project stage, and what gets written in the record. You approve the rule. It applies to every box, whoever dispatches it.

  3. 3

    Write the quotation follow-up routine

    We set out what a salesperson says when asking about a quotation, how to reach the purchase head as well as the architect, and when to pass an unanswered quotation to the sales head. You decide where the line falls. The routine gives each quotation an owner.

  4. 4

    Set reminders inside the record

    We turn the rules into reminders in your sales record or a shared sheet, with a name against each task. Salespeople test them on live boxes and quotations for a short trial period, and tell us when a reminder arrives for a box already followed up. We adjust the wording until the reminder tells them what to do, which question to ask and what to record, and not just that something is due.

  5. 5

    Build the reasons-lost list

    We agree a short list of reasons a project is lost, such as price, delivery, shade, a different stone specified or no response. The salesperson picks one when closing a quotation. You review the list so that lost projects teach the company about its stone.

  6. 6

    Review boxes, quotations and repeat buyers

    We read the boxes followed up, quotations answered, reasons recorded and repeat contractors contacted against the starting list. You and the sales head decide which rule to tighten and which repeat buyers need a call before the building season starts.

Where this fits

Three pieces of sales work, in this order.

This work sits inside sales process design, at stage 2, qualification. The audit comes before it, and sales management keeps it running.

  1. Step 1

    Sales audit

    Find where deals are being lost and what to fix first.

    Start here if you cannot say where orders are lost.

  2. Step 2 · you are here

    Sales process design

    One written way to sell, from first enquiry to repeat order.

    Start here if every salesperson sells differently.

  3. Step 3

    Sales management

    A target, a review routine and someone who owns the number.

    Start here if the team has targets and no routine.

Tell us what you need Your brief is read before we call. Scope, fee and term in writing.

FAQ

Questions owners ask before they call.

Not here? More answers, or ask on WhatsApp.

What rhythm of follow-up suits us?
That depends on the project and the buyer, so we do not fix a rhythm. We set the next step at each stage and let the project's own pace decide.
Who should make the calls?
Whoever the buyer already knows. The system assigns an owner and a reminder, and your team chooses who it is.
What if a buyer has gone silent?
Record it and make a clear last attempt. We add a note on the reason and a date to revisit, so the project is parked deliberately, not forgotten.
What if the designer never opens the sample box?
Call once to ask whether it arrived and whether another piece would help, then leave the project open in the record. Some designers return when the project restarts, and the box and the note stay on file.
What if the architect never opens the sample box?
Call the person who asked for it, confirm it arrived and ask who will review it. If it sits unopened, ask whether the project has stalled. Record the answer. A box that goes nowhere tells you about the project, and we add the reason to the lost list so the pattern becomes visible.
Should accounts staff chase quotations?
Accounts can chase payments, but a quotation needs someone who understands the stone and the project, so the salesperson owns it. Where a purchase head pays the bill, the salesperson introduces accounts at order stage. We write the handover into the routine so each person knows when the account moves.
How much does it cost?
There is no price list, because the work differs by business. The fee is scoped after we have read your brief and spoken to you, and put in writing before anything starts, split into our time, your media spend and production.
How long is the contract?
The term is agreed in writing after we have spoken, along with the fee and the reporting. It is never a default twelve months, and renewal is decided on the numbers against the baseline recorded at the start.
How soon will we see results?
It depends on the trade, the channel and what is already in place. After we have read your brief and spoken to you, we say what we would expect to move first and how it will be measured against the baseline. Nothing here is guaranteed.
Who will actually do the work?
The person you speak to before anything starts. We work from one office in Nagarbhavi, Bengaluru, with no account managers in between.

Your next practical step

Tell us what you are trying to grow, and we will read it before we call.

Eight short steps, mostly taps. Skip anything you would rather answer on the call.