Skip to content
GullySales

Paint and coating manufacturers · Dealer sell-through analytics

Read what each paint counter sells, not only what your invoices say it bought.

Dealer sell-through analytics for paint and coating manufacturers sets what each dealer buys from you beside what the counter sells to painters and homeowners, and how old the tins on the shelf are. GullySales analyses the records you hold and writes the dealer actions and reorder triggers your channel manager decides on.

Scope, fee, reporting and term are agreed in writing after we have read your brief and spoken to you.

Realistic editorial illustration of chemical manufacturers at work in India

What dealer sell-through analytics means

Dealer sell-through analytics reads what each dealer sells on to customers, set beside what they buy from you. GullySales analyses the sell-in and sell-out records you hold, shows stock age and purchase patterns by dealer, and writes the dealer actions and reorder triggers your channel manager decides on.

Last updated 14 Nov 2026.

For paint and coating manufacturers

Where it usually goes wrong, and what we would do.

  • “The scheme month looks like a good month”

    A paint dealer who orders heavily before a scheme closes shows well in your books. The tins may sit in the godown behind the counter, with the tint machine used for a rival's shades. Without the counter's own sales set beside the order, a scheme that only moved stock onto shelves is read as a success. The channel manager then plans the next scheme on a number that never described the counter at all.

  • “Shade and size sell at different speeds”

    A dealer clears the popular whites and mid-tone emulsions while the deep shades and the small packs wait. Orders in your books show litres, not which shade cards turn. Stock age by line shows which products a counter is stuck with, and which batch numbers might be questioned later.

  • “The painter's loyalty decides what the counter sells”

    At a paint shop the painter names the brand and the dealer follows. A dealer whose purchases are flat may have painters who prefer another maker's loyalty scheme. The numbers cannot say why, but a sharp fall in sell-out beside steady sell-in tells your channel manager where to ask.

  • “Industrial coating dealers hold slow, costly stock”

    A dealer supplying protective coatings and epoxy to fabricators holds high-value drums with a shelf life and a batch record. One slow project leaves stock ageing at the dealer, and the return request arrives after the material has passed its best. The age table gives you the warning earlier.

What we do

What we deliver for paint and coating manufacturers.

The work available for this need. We agree the deliverables and responsibilities for your engagement in writing.

  1. Dealer data readiness note

    A review of what each dealer reports now: sales to customers, closing stock, returns, tint machine consumption and format. It marks which dealers can be analysed today and which need a better return first.

    Result: Each dealer is marked usable, usable with a caveat or not yet usable.

  2. Sell-in against sell-out by dealer

    Purchases from you are set beside the dealer's sales across the same period, adjusted for stock at the opening and closing. Dealers who sell on are separated from those who only buy to meet a scheme.

    Result: The gap between what a dealer bought and sold is shown on one line per dealer.

  3. Stock age and cover table by line

    For each dealer, the table lists litres held, how long each batch has been there, and how long it would last at the present rate of sale. Slow shades and ageing lots are flagged for a conversation.

    Result: You can name the dealers holding stock older than your own return rule allows.

  4. Purchase pattern page per dealer

    The dates, sizes and product lines each dealer orders are laid against scheme dates and season. A dealer whose orders bunch at each deadline is visible at once, as is one who buys steadily.

    Result: Order rhythm against scheme dates can be read dealer by dealer.

  5. Reorder trigger sheet

    A written rule per dealer, set with your channel manager, says how low stock cover must fall before a call or a visit. A field representative can follow it without opening a spreadsheet.

    Result: A representative can say which dealer to ring today from the sheet alone.

  6. Limits note and dealer action list

    A plain statement says which figures are reliable and which are guesses, followed by a ranked list of dealers with one suggested step each: visit, scheme change, rebalance, pause or leave alone. You decide each step.

    Result: Every suggested action carries its reason and the figure behind it.

How the result is measured

  • Sell-in against sell-out by dealer
  • Stock cover by dealer and line
  • Share of dealer stock past its age limit

Recorded as a baseline before work starts, so every later report has an honest comparison.

Who it is for

This is written for these paint and coating manufacturers.

  • Decorative paint makers selling interior and exterior emulsions, enamels and wood finishes through dealers
  • Wall putty, primer and waterproofing coating makers
  • Industrial paint makers supplying engineering, fabrication and automotive component plants
  • Protective and anti-corrosion coating makers for structures and pipelines
  • Powder coating manufacturers supplying coating shops
  • Floor coating and epoxy system makers for factories and warehouses
  • Wood coating and polish makers selling to furniture units
  • Regional paint brands that supply a few districts through their own dealers

Before you decide

Agree the work. Know how to judge it.

Dealer sell-through analytics for paint and coating manufacturers: use these checks to prepare, choose the scope, and review what changes.

Bring the right evidence

List the decisions the report must support and where each number comes from. Identify differences between platform leads, CRM enquiries, accepted opportunities, and orders.

Make the scope clear

Agree definitions, source systems, reporting periods, and who checks the data. Keep media spend, production, and service fees visible rather than combining them into an unexplained total.

Check the work in use

Trace a reported result back to its source record and check for duplicates or missing outcomes. Compare like periods and explain changes in offer, season, or spend that affect interpretation.

Know when to change course

If a metric cannot change a decision, it may not belong on the main report. Fix missing sales outcomes before adding more charts of marketing activity.

These are discussion points, not a fixed package. GullySales confirms the deliverables, responsibilities, fee, and term in writing after reading your brief and speaking with you.

Before we start

What to have ready before the work starts.

The records, access and decisions this work needs from paint and coating manufacturers. Anything missing is noted in the written scope, with who will supply it.

Your invoices by dealer and product line
A list of what each dealer bought, by date, shade family and pack size. It is the sell-in side. Without it there is nothing to set the dealer's own sales against, and any reading would rest on the dealer's word alone.
Whatever dealers report to you
Closing stock sheets, regular photographs, sales registers or tint machine counts, in whatever shape they come. Imperfect records are still usable. If no dealer reports anything, say so, because tracking must be set up first and analysis would prove nothing.
Scheme dates and terms
The dates, slabs and gifts of each scheme over the period. They explain order spikes. Without them a bunching of orders cannot be tied to its cause, and the channel manager might blame a dealer for behaviour your own scheme invited.
Your return and ageing rule
Say how old a batch may be before you want it moved, and which lines carry a shelf life. The stock age table needs your own limit. Without it we cannot flag a dealer, and the table would only show numbers.
A channel manager who will act
One named person must read the list and decide on each dealer. If the owner makes every dealer decision, say so. An action list that nobody has the authority to carry out gives you an interesting report and an unchanged shelf.

How it works

How the dealer sell-through analytics work runs

The work itself, in order. How an engagement starts, from your brief to a written scope, is set out on our method page.

  1. 1

    Name the decisions you need to make

    You say what the analysis must help decide: which dealers to visit, where a scheme failed, which district is overstocked. We list the records you hold, including invoices, dealer reports and any tint machine data, and agree which dealers and product lines are in scope.

  2. 2

    Check the data dealer by dealer

    We read your invoices beside each dealer's reports, find gaps and mismatches, and write the readiness note. Some dealers send photographs of a register page. You decide whether to proceed on what exists or to improve collection first through secondary sales tracking.

  3. 3

    Build the views and test the surprises

    Sell-in, sell-out, stock age and purchase pattern are built for the agreed dealers, line by line, with the opening and closing stock on the same page. A surprise, such as a large dealer with falling sales, is tested with a call by your representative before it is treated as a fact.

  4. 4

    Set triggers and decide actions with the channel manager

    You and your channel manager read the views, set a reorder trigger for each dealer and choose the action list. A dealer holding old stock may get a rebalance across counters or a changed scheme. The decision and its reason are written beside each name.

  5. 5

    Put the sheet into your representatives' routine

    The trigger sheet and action list go to the people who visit counters. We check that they can use them in the field and fix the wording where they cannot. Your channel manager owns the dealer calls; GullySales does not contact dealers.

  6. 6

    Read the next dealer returns against the first

    When the next dealer returns arrive, we compare them with the starting readings: stock age, cover and order rhythm. The comparison shows which actions moved the figures and which did not, and it notes any dealer whose reporting has changed. Your channel manager then decides which triggers to tighten, which dealers to leave alone and which still need a better return before they are read.

Where this fits

Three pieces of sales work, in this order.

This work sits inside sales process design, at stage 1, prospecting and lead generation. The audit comes before it, and sales management keeps it running.

  1. Step 1

    Sales audit

    Find where deals are being lost and what to fix first.

    Start here if you cannot say where orders are lost.

  2. Step 2 · you are here

    Sales process design

    One written way to sell, from first enquiry to repeat order.

    Start here if every salesperson sells differently.

  3. Step 3

    Sales management

    A target, a review routine and someone who owns the number.

    Start here if the team has targets and no routine.

Tell us what you need Your brief is read before we call. Scope, fee and term in writing.

FAQ

Questions owners ask before they call.

Not here? More answers, or ask on WhatsApp.

Can I do this if my dealers report nothing?
Not yet. With no dealer sales or stock records there is nothing to analyse, and any figure would be a guess. We would say so and point you to secondary sales tracking first. Even one stock photograph from the counter gives a start, and we would tell you what it can show.
Will the dealer's figures be accurate?
Not always, and we state this on the limits note. Dealer-reported figures are evidence, not proof. Late, rounded or gapped returns are marked so a weak number is not used as a strong one. If a figure matters for a dispute, a dealer audit is the right route.
Does it work for industrial coatings dealers too?
Yes, with different lines. Drums, batch numbers and shelf life matter more than shade families, and orders follow projects rather than seasons. The same sell-in and sell-out comparison applies, and the action list may suggest a stock rebalance or a technical visit instead of a scheme change.
Will you contact my dealers?
No. GullySales reads the records and writes the views, triggers and action list. Your channel manager and representatives speak to dealers, because the relationship is yours and some actions, such as pausing supply, are decisions for your owner.
How do I know a scheme worked?
Compare sell-out before, during and after the scheme period, beside the sell-in. If counters sold more tins to painters and homeowners, sell-out rose. If only orders rose and stock age grew, the scheme moved stock onto shelves. The records show which, dealer by dealer.
Is this the same as improving what my dealers sell?
No. Analytics tells you where to look; improving a dealer's selling through visits, training and counter support is dealer development. The action list may send you there for some dealers, and it will say which ones and why.
How much does it cost?
There is no price list, because the work differs by business. The fee is scoped after we have read your brief and spoken to you, and put in writing before anything starts, split into our time, your media spend and production.
How long is the contract?
The term is agreed in writing after we have spoken, along with the fee and the reporting. It is never a default twelve months, and renewal is decided on the numbers against the baseline recorded at the start.
How soon will we see results?
It depends on the trade, the channel and what is already in place. After we have read your brief and spoken to you, we say what we would expect to move first and how it will be measured against the baseline. Nothing here is guaranteed.
Who will actually do the work?
The person you speak to before anything starts. We work from one office in Nagarbhavi, Bengaluru, with no account managers in between.

Your next practical step

Tell us what you are trying to grow, and we will read it before we call.

Eight short steps, mostly taps. Skip anything you would rather answer on the call.