Skip to content
GullySales

Powder coating companies · CRM

Every customer's parts, shades and lot sizes belong in one record the whole shop can see.

A CRM for a powder coater is a single record of every customer, enquiry, quote and repeat job, instead of notes on a diary and a phone. GullySales sets up a record that suits a job shop and works on keeping it filled in by the people who answer the calls.

Scope, fee, reporting and term are agreed in writing after we have read your brief and spoken to you.

Realistic editorial illustration of cnc machining companies at work in India

What CRM means

A CRM is the record where every enquiry, call and quote is kept against a customer, replacing separate notebooks, spreadsheets and memory. GullySales sets up or cleans an existing CRM and reports from it by enquiry outcome rather than by activity logged.

Last updated 14 Nov 2026.

For powder coating companies

Where it usually goes wrong, and what we would do.

  • “Customer knowledge sits in one head”

    The owner or supervisor remembers which shade a customer likes and which frame needs a special hook. When that person is away, the next caller meets someone who has to ask again, and the buyer notices.

  • “Quotes vanish after sending”

    A rate sent by message on Monday is forgotten by Thursday. Without a record of what was quoted for which part and quantity, the shop cannot follow up, and the buyer goes to whoever calls back.

  • “Dormant customers go unseen”

    A regular who sent racks every few weeks and stopped is easy to miss when the oven is busy. A list sorted by last order shows who has gone quiet and who deserves a call.

What we do

What we deliver for powder coating companies.

The work available for this need. We agree the deliverables and responsibilities for your engagement in writing.

  1. Customer and part records

    Each customer with contacts, parts coated, approved shades and usual lot sizes.

    Result: A record that answers a repeat enquiry without asking again.

  2. Enquiry and quote pipeline

    Stages from enquiry to quote to trial lot to repeat order, with the quote amount against each.

    Result: A board showing every open quote.

  3. Simple tool choice

    Advice on a CRM or a well-built sheet that the shop will use, chosen with the front desk.

    Result: A tool the staff are comfortable opening each day.

  4. Last-order view

    A list of customers sorted by their last job, with a note on each.

    Result: A list of the quiet customers worth a call.

How the result is measured

  • Enquiries logged in the CRM
  • Data completeness
  • Reports generated from CRM data

Recorded as a baseline before work starts, so every later report has an honest comparison.

Fields worth keeping

These fields make a job shop's customer record useful.

Approved shade and code
The supervisor enters it at first approval. It lets any operator match a repeat lot and answers a later colour dispute.
Typical part and lot size
Filled in by whoever quotes. It shows who fills the oven with long runs and who sends a few gates.
Pretreatment instruction
Entered by the plant head after the first lot. It keeps a repeat part from being treated the wrong way.
Last job date
Updated when a lot is dispatched. It lists the customers who have gone quiet and are worth a call in a slow stretch.
Quote status
Open, won or lost with a reason. It shows whether losses come from price, delivery or oven limits.

Who it is for

This is written for these powder coating companies.

  • Powder coating job shops for fabricators and small manufacturers
  • Powder coating for electrical enclosures, panels and switchgear
  • Steel furniture, rack and shelving finishing shops
  • Auto and two-wheeler ancillary suppliers needing coating
  • Coaters for fitness equipment, playground and street furniture
  • Aluminium extrusion and architectural powder coaters
  • In-house coating units that take outside jobs
  • Gate, grill and railing coaters for builders and homes

Before you decide

When this may not be the right fit.

  • Nobody will enter the lot after dispatch, so the record would go stale and mislead the person who relies on it.
  • You have only a handful of regular customers whose shades the supervisor remembers and whose orders you can list on one page.
  • You want the tool to find new buyers, which a record of existing customers cannot do.

Before you decide

Agree the work. Know how to judge it.

CRM for powder coating shops: use these checks to prepare, choose the scope, and review what changes.

Bring the right evidence

List the records your team uses and show how an enquiry becomes an order today. Bring examples of duplicate entries, missing owners, and reports that require manual correction.

Make the scope clear

Agree the stages, required fields, access roles, and integrations before configuring the system. Separate software subscriptions from setup, data work, and training.

Check the work in use

Ask the people who will use the CRM to complete a real handover and find the next action without help. Check that the management report can be traced back to individual records.

Know when to change course

If the process is unclear, buying a more complex CRM adds more places for confusion. Start with the minimum fields and rules the team can use consistently.

These are discussion points, not a fixed package. GullySales confirms the deliverables, responsibilities, fee, and term in writing after reading your brief and speaking with you.

Before we start

What to have ready before the work starts.

The records, access and decisions this work needs from powder coating companies. Anything missing is noted in the written scope, with who will supply it.

The job book and the quote file
Bring the book where jobs are entered and the file or folder of quotes sent. Together they show which customers exist, what they ordered and what was quoted but never confirmed. Photographs are acceptable. If quotes were only spoken, we start with jobs and add quotes from the day the record begins.
A list of customers by contact person
Write the name of the person who decides at each regular customer, with a phone number that is answered. Customer knowledge that sits in one head is lost when that person leaves. This list becomes the first set of records, and gaps in it show which customers the shop does not really know.
Photographs of panels for repeat shades
For customers who return, bring a photograph or a physical panel of the shade last used, with the powder name if known. A shade described only in words is a common cause of disputes. If no panel exists, we mark the record as needing one and ask on the next order.
A decision on who owns the record
Name one person responsible for the record being complete and current, preferably the person who answers the calls. Without an owner, entries stop in busy weeks and the record decays into a second diary. The owner of the shop does not need to enter everything, but must read it.
A computer or phone the team will use
Identify the device that will hold the record, whether the office computer, a shared tablet or the phones on the floor. The tool we recommend depends on it. If the only device is the owner's personal phone, we plan around that, which narrows the options and keeps the record fragile. If a shared tablet is used, note who keeps it charged and where it stays during loading.

How it works

How the CRM work runs

The work itself, in order. How an engagement starts, from your brief to a written scope, is set out on our method page.

  1. 1

    Copy a run of jobs into a test sheet

    We take a recent run of jobs from the job book and enter them in a trial sheet with you, noting every field you reach for: buyer, part, metal, shade, gloss, quantity, rate agreed, date promised, date collected. You see what the record needs to hold. A field that nobody reached for is dropped before the real sheet is built, so the team is never asked to fill a column that no one reads.

  2. 2

    Draw the path from enquiry to repeat order

    With you and the person at the phone, we draw the steps a job takes: first call, part details, quote sent, sample panel, trial lot, approval, regular order. We name who moves it from one step to the next. This becomes the layout of the pipeline, so each quote stays visible and cannot vanish after it is sent.

  3. 3

    Choose a tool the shop will actually open

    We compare a spreadsheet, a simple shared tool and a fuller system against the way your team works: phones on the floor, one computer in the office, patchy connection. You choose. We recommend the simplest one that holds customer, part and quote records. A tool nobody opens is worse than the diary it replaced.

  4. 4

    Enter the customers and their regular parts

    We load the customers from the job book, one record each, with the contact person, the regular parts, the shade and the last order date. Where a shade was only ever described by words, a photograph of the panel is attached. You check the records of your ten best customers by eye, and correct anything the book got wrong.

  5. 5

    Teach the person who answers the phone

    We sit with the person who takes calls and the person who writes quotes, enter two real enquiries together and note where the screen, the language or the signal slows them. We then change the sheet to suit them. You decide who owns the record, and the owner is told that a quote not entered does not exist.

  6. 6

    Compare the record with the diary and the bank

    We compare the new record with the old diary and the payments received, to see whether every job, quote and dormant customer appears. We read the last-order view for customers who have gone quiet, and set that against the figures noted at the start. You decide which quiet customers to call first.

Where this fits

Three pieces of sales work, in this order.

This work sits inside sales management. A target, a review routine and someone who owns the number.

  1. Step 1

    Sales audit

    Find where deals are being lost and what to fix first.

    Start here if you cannot say where orders are lost.

  2. Step 2

    Sales process design

    One written way to sell, from first enquiry to repeat order.

    Start here if every salesperson sells differently.

  3. Step 3 · you are here

    Sales management

    A target, a review routine and someone who owns the number.

    Start here if the team has targets and no routine.

Tell us what you need Your brief is read before we call. Scope, fee and term in writing.

FAQ

Questions owners ask before they call.

Not here? More answers, or ask on WhatsApp.

Does a job shop need a CRM?
If more than one person answers enquiries or quotes, yes. Even a few dozen regular customers have shades, parts and quotes that are hard to hold in memory.
Which tool do you recommend?
Whichever one your front desk will open every working day. We compare a few ordinary options against your volume and your front desk's habits, and we set up the one that fits.
Can the shade record be a photograph?
Yes, with the code written beside it. A photograph of the approved panel shows what the customer saw, and the code lets the operator reorder the powder. Store both against the customer so either one settles a dispute.
Who should own the record?
The person who quotes, the supervisor or owner. They hear the details first and know what changed. If entry falls to someone who only hears it later, fields go blank, so keep the entry step with the one who speaks to the customer.
Which fields should a job shop record first?
Start with the buyer, the contact person, the part, the metal, the shade and gloss, the quantity, the date promised and the date collected. Add the rate agreed and the payment status next. Leave out any field nobody will fill on a busy afternoon. A short record that is complete beats a long one with gaps, and the fields can grow once the team is in the habit.
What if the team keeps writing in the diary as well?
Allow it for a while, and set a date after which a job or quote not in the record is treated as not existing. We check the diary against the record at the start, and the difference shows what is missing. The diary may stay as a backup. Two records only cause trouble when nobody decides which one is the real one.
How much does it cost?
There is no price list, because the work differs by business. The fee is scoped after we have read your brief and spoken to you, and put in writing before anything starts, split into our time, your media spend and production.
How long is the contract?
The term is agreed in writing after we have spoken, along with the fee and the reporting. It is never a default twelve months, and renewal is decided on the numbers against the baseline recorded at the start.
How soon will we see results?
It depends on the trade, the channel and what is already in place. After we have read your brief and spoken to you, we say what we would expect to move first and how it will be measured against the baseline. Nothing here is guaranteed.
Who will actually do the work?
The person you speak to before anything starts. We work from one office in Nagarbhavi, Bengaluru, with no account managers in between.

Your next practical step

Tell us what you are trying to grow, and we will read it before we call.

Eight short steps, mostly taps. Skip anything you would rather answer on the call.