Skip to content
GullySales

Ready-mix concrete manufacturers · Lead generation

Bring in pour enquiries from sites your transit mixers can reach on time.

Lead generation for a ready-mix plant means getting the grade, quantity and date of a planned pour into your dispatcher's hands from sites inside your delivery radius. GullySales works on finding those sites, giving them a clear way to ask, and recording every enquiry whether it was served or not.

Scope, fee, reporting and term are agreed in writing after we have read your brief and spoken to you.

A builder and supervisor inspect paving blocks in a materials yard

What lead generation means

Lead generation is the combined work of every channel that brings in a new enquiry, whether from search, adverts, referrals or a stall at an exhibition. GullySales runs these channels together and reports the number of enquiries each one produced, not the activity behind it.

Plan the next part of the work

Last updated 21 Nov 2026.

For ready-mix concrete manufacturers

Where it usually goes wrong, and what we would do.

  • “A lead outside the radius is a cost, not a gain”

    An enquiry from a site that is too far for the concrete to stay workable wastes the dispatcher's time and annoys the caller. Lead generation for a plant starts by drawing the line on the map and aiming every channel inside it.

  • “Pour enquiries arrive in a hurry and leave the same way”

    A site engineer who needs a slab cast soon rings two or three plants and books with the one that answers and confirms. A lead that waits for a callback is a lead handed to a rival, so the first reply matters more than the advertisement.

  • “Active sites are the real list of prospects”

    Every foundation dug, every shuttering frame going up and every board announcing a project within range is a future pour. Walking or driving the radius to note live sites gives a prospect list no directory can match.

  • “Rate-contract leads and one-pour leads need different handling”

    A developer's purchase team wants a vendor pack and a plant visit, while a house builder wants a price for one footing this week. Treating both the same loses the first through haste and the second through delay.

What we do

What we deliver for ready-mix concrete manufacturers.

The work available for this need. We agree the deliverables and responsibilities for your engagement in writing.

  1. A map of live sites in your radius

    A list of active construction sites within delivery distance, with the builder or contractor, the stage of work and who to speak to, kept current as projects start and finish.

    Result: Each site in range appears on the list with a note of the last contact.

  2. A pour request form

    A short form and a call button asking for site location, grade, quantity, date and whether a pump is needed, so the first call carries what the dispatcher must know.

    Result: Every enquiry reaches the dispatcher with grade, quantity and date filled in.

  3. Source tagging on every enquiry

    A field recording whether the enquiry came from search, a site visit, a dealer, an engineer's word or a repeat contractor.

    Result: The log shows which source brought each pour.

  4. A split between contract and single-pour leads

    Two routes in the log: one that sends the vendor pack and plans a plant visit, and one that goes straight to a quotation for the pour.

    Result: A purchase team and a house builder each get the reply that suits them.

  5. A record of declined and lost pours

    Every request the plant could not serve, with the reason, so lead generation is judged against real capacity.

    Result: The log separates leads lost to capacity from leads lost to price or delay.

How the result is measured

  • Relevant enquiries by source
  • Duplicate and unsuitable enquiries
  • Time to the first response
  • Accepted enquiries reaching an agreed next step

Recorded as a baseline before work starts, so every later report has an honest comparison.

What to capture or send

What to record when a builder asks for concrete.

Site address and gate
Locality, landmark and the road a transit mixer must use. It tells the dispatcher within seconds if the site is in range and the truck can enter.
Grade and quantity
The grade named in the drawing and the cubic metres wanted. Without both, a quote is guesswork and the enquiry cannot be scheduled.
Pour date and element
Slab, footing, column or road, and the day. A slab needs a pump and a long run; a footing may not. It sets the plan for the day.
One pour or rate contract
Whether the buyer wants a single delivery or supply across a project. They get different replies and different follow-up.
Pump and access
Whether a pump is needed and whether the site can take one. It decides if your pump service goes into the quote.

Who it is for

This is written for these ready-mix concrete manufacturers.

  • Builders' suppliers serving large residential and commercial projects
  • Infrastructure and road contractors' nearby plants
  • Small-batch plants for individual houses and small contractors
  • Captive plants that also sell to the open market
  • Pump hire and placement services run by the plant
  • Specialty concrete producers, such as self-compacting or high-strength mixes
  • Industrial-area units serving factory construction
  • A unit of a larger construction or building material group

Before you decide

When this may not be the right fit.

  • Your plant is booked out on most pour days, so more enquiries would only teach builders to try another plant.
  • Nobody records which site is inside the delivery radius, so a lead might be quoted for a place the trucks cannot reach in time.

Before you decide

Agree the work. Know how to judge it.

Lead generation for ready-mix plants: use these checks to prepare, choose the scope, and review what changes.

Bring the right evidence

Define the organisations or buyers you can serve and the reasons they would consider a conversation. Bring examples of accepted and rejected prospects so the selection rule is visible.

Make the scope clear

Agree the research sources, contact approach, qualification rules, and handover. Clarify which meetings count as accepted and what happens to replies that are not ready to buy.

Check the work in use

Review why a prospect was selected and what was learned from the response. Count held, relevant conversations separately from contacts found, messages sent, or meetings booked.

Know when to change course

If the same objection appears repeatedly, adjust the offer or buyer group before increasing outreach. Respect a request to stop contact and keep the exclusion in the record.

These are discussion points, not a fixed package. GullySales confirms the deliverables, responsibilities, fee, and term in writing after reading your brief and speaking with you.

Before we start

What to have ready before the work starts.

The records, access and decisions this work needs from ready-mix concrete manufacturers. Anything missing is noted in the written scope, with who will supply it.

Delivery challans from the last busy season
These show where concrete actually went, which is the only honest basis for a radius. Photographs of the challan book pages are enough, even if smudged. Without them we draw the boundary from the dispatcher's memory, and the list of target sites will include places the fleet rarely reaches.
The dispatcher's rule for declining a pour
Someone must say when the answer is no: a grade not batched, a site with a blocked lane, a date already full. A few lines in the dispatcher's own words are acceptable. Without this rule, the form will invite requests the plant cannot serve, and each declined enquiry becomes a sour call.
Names of contractors who reorder
Four or five names with a phone number and the site they last poured are enough to show what a good lead looks like. The sales owner chooses them, not us. When this is missing we qualify enquiries against a generic picture and the source tags carry less meaning.
Access to the plant's enquiry phone line
We need the number the contractors ring, and a way to see the call log or have it forwarded for the test period. A shared WhatsApp business number is fine. If calls land on the dispatcher's personal phone only, source tagging cannot start and the form stands alone.

How it works

How the lead generation work runs

The work itself, in order. How an engagement starts, from your brief to a written scope, is set out on our method page.

  1. 1

    Mark the delivery radius on a map

    We start with the dispatcher and a printed street map, and draw the circle your mixers can really serve at the hours you batch, allowing for the level crossing, the narrow bridge and the school-hour jam that slow a truck. You decide which edge localities you will serve only on a booked schedule. What exists afterwards is one agreed boundary that every later lead is measured against.

  2. 2

    List the sites already pouring nearby

    We read the hoardings, the approval boards and the shuttering visible from the roads around the plant, then take your old delivery challans to mark where you have poured before. The result is a short list of live and soon-to-pour sites, each with a builder's name, a stage of construction and a note on whether another plant already supplies it.

  3. 3

    Write the pour request form with the dispatcher

    The dispatcher says what they must know before they can say yes: grade, quantity in cubic metres, pour date, mixer access to the site, pump or no pump, and who receives the truck. We turn those into a short form and a WhatsApp reply script. You approve each question, because a field the dispatch desk never uses only slows the site engineer filling it.

  4. 4

    Run mock enquiries through the dispatch desk

    We send three or four invented requests, one inside the radius, one at the edge and one for a grade you do not batch, and watch how the desk handles them. Where an answer stalls, we change the form or the script. You see exactly where the handoff between whoever picks up the phone and whoever books the mixer loses information.

  5. 5

    Read booked pours against logged enquiries

    Once the form is live, we set the enquiries logged beside the pours the plant actually delivered, split by source, by contract or single pour, and by served or declined. You decide which sources to keep feeding and which to drop. We read all of it against the counts of requests and booked pours recorded before the work began, in your own terms.

Where this fits

Three pieces of sales work, in this order.

This work sits inside sales process design, at stage 1, prospecting and lead generation. The audit comes before it, and sales management keeps it running.

  1. Step 1

    Sales audit

    Find where deals are being lost and what to fix first.

    Start here if you cannot say where orders are lost.

  2. Step 2 · you are here

    Sales process design

    One written way to sell, from first enquiry to repeat order.

    Start here if every salesperson sells differently.

  3. Step 3

    Sales management

    A target, a review routine and someone who owns the number.

    Start here if the team has targets and no routine.

Tell us what you need Your brief is read before we call. Scope, fee and term in writing.

FAQ

Questions owners ask before they call.

Not here? More answers, or ask on WhatsApp.

How do we know a lead is inside our delivery range?
Ask for the site location on the first call or form and check it against the radius your dispatcher works to. Plants with long hauls in traffic should set the line by drive time, not by straight distance.
Should we buy lists of builders?
A bought list rarely shows which sites are active or which fall in your radius. A drive-through of your own area and a record of who is building where gives better names and costs nothing but time.
What if we are booked out and leads still arrive?
Keep logging them. The record shows how much demand the plant turns away, which is the evidence for adding a mixer, shifting slots or raising rates for short-notice pours.
How do we treat a lead for a site at the edge of our range?
Quote only if a transit mixer can arrive before the concrete loses its workability, which depends on distance, traffic and mix. Say so to the buyer and offer a slot you can honour. A late truck costs more than a lost order.
Who answers the pour request form when the dispatcher is on another call?
Someone named by you must own the form during plant hours, and it should not be the dispatcher alone. Some plants give it to the sales coordinator or the plant clerk, with the dispatcher confirming only the grade and truck. We write the reply script so that the first message acknowledges the request and states what will be confirmed and by whom. If nobody owns it, the form brings requests that sit unread, which is worse than having no form. We agree the name in the third step and test it with mock requests before the form goes public.
Do we need to visit sites ourselves to find leads?
Some visits help, but they do not have to be yours or ours. A sales person or the driver who already passes the sites can note a board name or a stage of construction while on a route. We provide a short note to fill in and put the answers on the site map. We do not send anyone onto a site uninvited, and we do not collect personal contact details from a hoarding without a reason to call. A visit is a way to learn a builder's name, then you or the sales owner decide whether and how to introduce the plant.
How much does it cost?
There is no price list, because the work differs by business. The fee is scoped after we have read your brief and spoken to you, and put in writing before anything starts, split into our time, your media spend and production.
How long is the contract?
The term is agreed in writing after we have spoken, along with the fee and the reporting. It is never a default twelve months, and renewal is decided on the numbers against the baseline recorded at the start.
How soon will we see results?
It depends on the trade, the channel and what is already in place. After we have read your brief and spoken to you, we say what we would expect to move first and how it will be measured against the baseline. Nothing here is guaranteed.
Who will actually do the work?
The person you speak to before anything starts. We work from one office in Nagarbhavi, Bengaluru, with no account managers in between.

Your next practical step

Tell us what you are trying to grow, and we will read it before we call.

Eight short steps, mostly taps. Skip anything you would rather answer on the call.