Skip to content
GullySales

Roofing sheet manufacturers · Follow up systems

Chase every quote and dealer sample until the buyer says yes or no.

A follow-up system for a roofing sheet manufacturer is the set of reminders and messages that keep a quote, a sample or a new dealer from going quiet. GullySales writes the steps around the way your sheets are bought, including the pre-monsoon rush.

Scope, fee, reporting and term are agreed in writing after we have read your brief and spoken to you.

Factory workers handle a profiled metal roofing sheet

What follow up systems means

A follow-up system is the set routine for calling, messaging or emailing an enquiry more than once, since most buyers do not decide on the first conversation. GullySales sets the number and timing of follow-ups so an undecided buyer keeps hearing from you until they decide either way.

Last updated 14 Nov 2026.

For roofing sheet manufacturers

Where it usually goes wrong, and what we would do.

  • “A quote is read once and then forgotten”

    A rate sent to a contractor competes with three others on the same day. Without a follow-up, the buyer chooses whoever called back, and that is not always the cheapest or the best sheet.

  • “A new dealer needs a second visit”

    A yard that agrees to a trial order waits to see the first lot arrive and sell. Nobody calls, and the dealer drifts back to the old brand. A visit after the first sale is where a trial becomes a habit.

  • “The rains shorten every decision”

    Before the monsoon a buyer decides in a day. After it, a delayed quote turns into a deferred project. Follow-up before the season needs a different rhythm from follow-up in the slow months, and both need writing down.

What we do

What we deliver for roofing sheet manufacturers.

The work available for this need. We agree the deliverables and responsibilities for your engagement in writing.

  1. Quote follow-up steps

    A sequence of calls and messages for each open quote, ending with a clear yes, no or lapse.

    Result: Every quote reaches an outcome that is written down.

  2. Rate-lapse message

    A message sent when a quote validity date ends, with an offer to quote again.

    Result: A lapsed quote is renewed or closed, not left open.

  3. New dealer trial plan

    Visits and calls around a trial order, from delivery to the first reorder.

    Result: Each trial dealer has a next step on the calendar.

  4. Sample and site-visit follow-up

    A note after a sample or a roof visit asking for the decision.

    Result: Fabricators are asked for an answer after seeing the sample.

  5. Dormant dealer reminder

    A list of yards that have not ordered, with a reason to call.

    Result: Silent dealers appear on a list rather than disappearing.

How the result is measured

  • Follow-up completion rate
  • Average number of follow-ups before close
  • Enquiries closed after repeat follow-up

Recorded as a baseline before work starts, so every later report has an honest comparison.

What to capture or send

Send the right note for each quote, trial and dormant dealer.

After a quote
Send the dated rate and the profile with the certificate link. Record the buyer's reply or the reason for silence.
When the rate has lapsed
Tell the buyer the number has changed and send the new one, instead of letting the old quote decide the deal.
New dealer trial order
After the first delivery, check the arrival, the stacking and the first sale. A second visit decides whether they restock.
After a sample or site visit
Send photographs of what was shown and the next step the buyer agreed to, while the roof is still fresh in mind.
Dormant dealer
A reminder with the current rate and any change in stock or profile. Note the reason if the dealer moved to another brand.

Who it is for

This is written for these roofing sheet manufacturers.

  • Colour-coated and pre-painted roofing sheet makers
  • Galvanised and galvalume corrugated sheet manufacturers
  • Fibre cement and cement sheet makers
  • Polycarbonate and translucent sheet manufacturers
  • Metal roof tile and tile-profile sheet makers
  • Insulated roof panel and sandwich panel makers
  • Plastic and FRP roofing sheet makers
  • Regional sheet makers serving one state through dealers

Before you decide

When this may not be the right fit.

  • You change rates every few days and cannot keep quotes current, so follow-up would chase numbers that no longer stand.
  • Nobody is named to make the calls, and a written sequence needs a person to act on each step.
  • You have no dealer in the district yet, so the follow-up would have nobody to deliver and support the order.

Before you decide

Agree the work. Know how to judge it.

Follow-up systems for roofing sheet manufacturers: use these checks to prepare, choose the scope, and review what changes.

Bring the right evidence

Trace recent enquiries from arrival to the last recorded action. Include a won enquiry, an unsuitable one, and one that went quiet, with personal details removed for the initial discussion.

Make the scope clear

Agree who accepts each enquiry, what makes it qualified, and how ownership changes. Include a rule for missed replies and a clear reason for closing an enquiry.

Check the work in use

Pick an enquiry at random and ask the team to find its owner, latest conversation, and next action. Check that the record agrees with what actually happened.

Know when to change course

If no one has capacity to respond, assign that responsibility before buying more leads. Automation can support the owner, but it cannot replace an unresolved handover.

These are discussion points, not a fixed package. GullySales confirms the deliverables, responsibilities, fee, and term in writing after reading your brief and speaking with you.

Before we start

What to have ready before the work starts.

The records, access and decisions this work needs from roofing sheet manufacturers. Anything missing is noted in the written scope, with who will supply it.

Every open and expired quote
The file of quotes with dates, profiles and quantities. They are where the routine starts. Quote validity dates are essential here, since they decide when to call. Without them we begin with new enquiries only.
A named person for each dealer
A salesperson responsible for each dealer. The routine needs a caller. Where two people share an account, name one as the owner. The stand-in for leave and tour days should be named too, with the same access to the sheet. Without one the schedule is a document.
A rule for closing a quote
The owner's decision on when a quote is treated as lost. The rule differs by quote size and by season, and it is a decision we do not make for you. Without it, old quotes stay open and the picture is wrong.
Examples of chasing messages
Screens of what the desk sends now, with names hidden. They show tone. Remove customer names if you prefer. Without them we write in a voice your dealers will not recognise.
A list of dormant dealers
Dealers who stopped ordering, with the last order date. The reminder needs them. Even a rough list from memory is a start. Without the dates, the reminder cannot say how long the silence has lasted. Without it that message is skipped.

How it works

How the follow up systems work runs

The work itself, in order. How an engagement starts, from your brief to a written scope, is set out on our method page.

  1. 1

    Count quotes that expired unanswered

    We open the quote file and mark each quote by outcome: order, loss with a known reason, or simply expired. You tell us what you remember of the silent ones. We read the quote file by profile, because a quote for a custom length behaves differently from a stock one. We learn how many sit unanswered and after which step they stalled.

  2. 2

    Listen to how the desk chases today

    With consent, we read the chasing messages and sit by a call or two, to see where a salesperson hesitates. You say which dealers are awkward to chase. We note the hour of the day when a message is sent, since a dealer at the counter replies sooner than one in the yard. The routine is written around what is actually said.

  3. 3

    Write the steps for a quote and a sample

    We write what happens after a quote, after a sample and after a site visit: the question, the document and the next date. You edit for your sales head's voice. After a sample, the question is what the buyer made of it, and the document is the fixing guide. We write the questions in the words a dealer uses at the counter, not in the words of a sales manual. The salesperson who chases checks the sequence.

  4. 4

    Draft the rate-lapse and dormant dealer messages

    We prepare a short message for when a quoted rate lapses, a trial plan for a new dealer and a reminder for a dealer who has stopped ordering. You approve every line. The trial plan for a new dealer sets a small first order and a second visit, and the dealer is told what to expect. A dealer who has not ordered for a season is asked what changed in their trade, not why they stopped buying from you. The messages ask a question and do not press.

  5. 5

    Run it on the open quotes

    We run the routine on quotes now open, with your team making the calls and noting results. You decide when a quote is closed. Each call is recorded in the sheet with the answer given, in the buyer's words. Calls that reach a voicemail are logged as tries, and the next attempt is a message with a question instead of a second call. The run shows where the order or wording needs to change.

  6. 6

    Compare outcomes with the first count

    Against the quote counts taken at the start, we read how many were answered, ordered or closed with a reason. You and we decide what to alter. We separate quotes closed because the buyer chose another maker from those that lapsed through silence. The reading says what the routine did and did not do.

Where this fits

Three pieces of sales work, in this order.

This work sits inside sales process design, at stage 2, qualification. The audit comes before it, and sales management keeps it running.

  1. Step 1

    Sales audit

    Find where deals are being lost and what to fix first.

    Start here if you cannot say where orders are lost.

  2. Step 2 · you are here

    Sales process design

    One written way to sell, from first enquiry to repeat order.

    Start here if every salesperson sells differently.

  3. Step 3

    Sales management

    A target, a review routine and someone who owns the number.

    Start here if the team has targets and no routine.

Tell us what you need Your brief is read before we call. Scope, fee and term in writing.

FAQ

Questions owners ask before they call.

Not here? More answers, or ask on WhatsApp.

When should we chase a quote?
There is no single rule for all buyers. Match the follow-up to the quote's validity date and the buyer's urgency, and stop when the buyer gives a clear no. Write the rule down so each salesperson follows it.
Will follow-up annoy dealers?
A call that brings stock news, a rate update or an answer to a complaint is welcome. A call that only asks if the dealer has decided is not. Give every follow-up a reason.
Who should do the chasing?
The salesperson who owns the relationship, reminded by the shared record. Office staff can send routine messages, but a decision-maker wants to hear from someone who knows the sheet.
What do we say to a buyer who went to a cheaper maker?
Ask what the other quote specified, including thickness and coating. The gauge may differ from yours, so comparing like with like explains the gap. Send your specification again, and leave the door open for the next roof.
How should we answer a buyer who says a cheaper maker has quoted?
Thank them, ask what they bought and what the difference was, and leave the door open. Do not argue the price. A buyer who left may return when a cheaper sheet fails, or on the next order. Record the reason in the sheet so patterns show. The reason is written in the sheet. We write the call and the message, and the reply from the buyer is stored with the quote.
Who in the plant should do the chasing?
The salesperson who owns the account, supported by the sales desk for rate and stock questions. Chasing by the owner is kept for the largest quotes. We assign each stage to a role, not a person, so the routine survives a change of staff. The owner is told only when a quote of unusual size goes quiet. Rate and stock answers come from the desk in a few lines, so the salesperson on the road is never left guessing. If the field team is on the road, the desk makes the call.
How much does it cost?
There is no price list, because the work differs by business. The fee is scoped after we have read your brief and spoken to you, and put in writing before anything starts, split into our time, your media spend and production.
How long is the contract?
The term is agreed in writing after we have spoken, along with the fee and the reporting. It is never a default twelve months, and renewal is decided on the numbers against the baseline recorded at the start.
How soon will we see results?
It depends on the trade, the channel and what is already in place. After we have read your brief and spoken to you, we say what we would expect to move first and how it will be measured against the baseline. Nothing here is guaranteed.
Who will actually do the work?
The person you speak to before anything starts. We work from one office in Nagarbhavi, Bengaluru, with no account managers in between.

Your next practical step

Tell us what you are trying to grow, and we will read it before we call.

Eight short steps, mostly taps. Skip anything you would rather answer on the call.