Skip to content
GullySales

Rotational moulding companies · CRM

Keep every dealer, plant buyer and drawing enquiry in one place the team can read.

A CRM for a rotational moulder is a single record of dealers, plant buyers and custom part enquiries, with what was sent and what is next. GullySales sets up the fields, stages and views in the system you choose, and your team keeps it current.

Scope, fee, reporting and term are agreed in writing after we have read your brief and spoken to you.

Realistic editorial illustration of plastic injection moulding units at work in India

What CRM means

A CRM is the record where every enquiry, call and quote is kept against a customer, replacing separate notebooks, spreadsheets and memory. GullySales sets up or cleans an existing CRM and reports from it by enquiry outcome rather than by activity logged.

Last updated 14 Nov 2026.

For rotational moulding companies

Where it usually goes wrong, and what we would do.

  • “The dealer list is a spreadsheet nobody reviews”

    A dealer who skips a season shows up only when sales fall. If last order dates sit in a sheet no one opens, no one asks why the shelf went quiet.

  • “A custom enquiry lives in one inbox”

    The drawing, the sample, the costing and the revised quote are in a single person's email. When that person is away, the buyer waits and the history is lost.

  • “Two different pipelines in one list”

    A dealer relationship runs across seasons, while a custom part runs from drawing to sample to order. Treated as one list, neither is tracked properly.

  • “The same buyer is asked twice”

    A plant engineer enquires for a tank, later for a custom part, and two team members reply as if strangers. A shared record shows the earlier talk.

What we do

What we deliver for rotational moulding companies.

The work available for this need. We agree the deliverables and responsibilities for your engagement in writing.

  1. A dealer pipeline and a custom part pipeline

    Two sets of stages with their own fields, one for dealers by town and one for custom parts by drawing status.

    Result: Each relationship is tracked by the steps that matter to it.

  2. A dealer record with last order and territory

    Fields for town, brands stocked, last order, contact and notes.

    Result: Quiet dealers can be seen and called.

  3. An enquiry record for custom parts

    Drawing received, sample status, volume, material contact, quote sent and reason for outcome.

    Result: Any team member can pick up an enquiry.

  4. Views and reminders

    Saved lists for dealers not ordered recently and quotes not answered, with reminders assigned to a person.

    Result: The team opens a list and knows who to call.

  5. Import of existing records and a short training

    Moving the spreadsheet into the system, cleaning duplicates and showing the team how to log a call.

    Result: The old sheet is retired and the new record is used.

How the result is measured

  • Enquiries logged in the CRM
  • Data completeness
  • Reports generated from CRM data

Recorded as a baseline before work starts, so every later report has an honest comparison.

Fields worth keeping

Keep dealers and custom parts in separate pipelines with these fields.

Dealer territory and last order
Filled by the area salesperson. It shows who has stopped ordering, so a call asks why before a competitor does.
Products the dealer stocks
Updated at each visit. It shows which capacities are missing from the yard and where a restock offer fits.
Custom part dimensions and quantity
Entered from the drawing or sketch. It decides whether a mould makes sense before engineering time is spent.
Drawing file and revision
Attached by the person who received it. It stops a quote being made on an older drawing.
Sample status and decision date
Updated by the engineer. It tells sales when to ring and what the buyer is checking.

Who it is for

This is written for these rotational moulding companies.

  • Water storage tank manufacturers
  • Chemical and process tank makers
  • Septic and underground tank makers
  • Dustbin and waste container makers
  • Material handling bins and pallets
  • Playground and outdoor furniture makers
  • Marine floats, buoys and boat makers
  • Custom OEM housings and enclosures

Before you decide

When this may not be the right fit.

  • Your dealer list is short and the owner knows every dealer personally, so a system adds data entry.
  • Custom enquiries come rarely, and a pipeline for them would stay empty.
  • Staff will not log a dealer visit afterwards, so the order history would stay thin.

Before you decide

Agree the work. Know how to judge it.

CRM for rotational moulding companies: use these checks to prepare, choose the scope, and review what changes.

Bring the right evidence

List the records your team uses and show how an enquiry becomes an order today. Bring examples of duplicate entries, missing owners, and reports that require manual correction.

Make the scope clear

Agree the stages, required fields, access roles, and integrations before configuring the system. Separate software subscriptions from setup, data work, and training.

Check the work in use

Ask the people who will use the CRM to complete a real handover and find the next action without help. Check that the management report can be traced back to individual records.

Know when to change course

If the process is unclear, buying a more complex CRM adds more places for confusion. Start with the minimum fields and rules the team can use consistently.

These are discussion points, not a fixed package. GullySales confirms the deliverables, responsibilities, fee, and term in writing after reading your brief and speaking with you.

Before we start

What to have ready before the work starts.

The records, access and decisions this work needs from rotational moulding companies. Anything missing is noted in the written scope, with who will supply it.

The dealer list as it stands
Whatever list you keep, in a sheet or on paper. It is the base of the import. Without it the dealer pipeline starts empty and the team falls back on memory. A photograph of a paper register is also acceptable, and we type it in ourselves.
Recent drawings and where they are kept
A note on where drawings are stored. The record holds links, not files, so we need to know the folder. If drawings are in personal inboxes, they must be gathered first. Include the name of the folder or drive, and who may open it, so access rules are set once and not guessed.
A choice of tool, or time to compare
Tell us whether a tool is already paid for. If not, we compare options for your size and you choose. Fields differ by tool, so work cannot proceed without it. Our comparison looks at price per user, phone use and whether the data can be taken out later, and you choose.
A named owner for the data
A single person signs off new fields and removes duplicate entries. When nobody owns it, the record decays within a season. This person also decides when a dealer is marked inactive, so old names do not crowd the views.
A rule on who may see rate lists
Decide which staff see dealer rates. A rule agreed now avoids a rate list reaching the wrong dealer. A rule written once also helps the new salesperson, who would otherwise learn it by embarrassment.

How it works

How the CRM work runs

The work itself, in order. How an engagement starts, from your brief to a written scope, is set out on our method page.

  1. 1

    Trace one dealer and one custom order

    With your sales head we take a dealer who was appointed and a custom part that went into production, and list every step from first contact to the first invoice. Two separate paths appear, and the pipelines in the record are built from those paths, not from a template. A step your team skips in practice is marked, so the pipeline fits the real path and not the one written on a wall.

  2. 2

    Decide the dealer record and the part record

    A dealer record holds territory, last order, rate list sent and credit position, while a part record holds drawing, material, quantity and mould status. We agree the fields with you and keep each to what the team will actually fill. Mandatory fields are kept to a handful, because a long form on a busy sales desk is filled in later from memory.

  3. 3

    Set up pipelines in the chosen tool

    We build the dealer pipeline and the custom part pipeline, add views for the sales head and the tool room, and write the reminders. Your team tests them with a handful of live enquiries, and you tell us what feels slow. A pilot with three or four people comes first, since a wider group would hide the small irritations that make a tool unloved.

  4. 4

    Import dealers and old enquiries in a clean batch

    We bring in the dealer list first, merge duplicates, mark inactive ones and ask you about doubtful names. Old custom enquiries follow. You check a sample of records before the full import is done. Dealers who have not ordered for a long time are marked inactive, not deleted, in case they return after a change in their shop.

  5. 5

    Run the team on live work

    Your salespeople use the record for new dealer calls and drawings while we look for gaps: a drawing in a personal inbox, a dealer call not logged. We adjust the setup, and you decide who may edit stages. Anything the team trips over is fixed in the setup instead of being worked around in side notes.

  6. 6

    Hand over ownership and read the first views

    You name the person who owns the data. We then read dealer orders and custom enquiries by stage against the figures recorded before the work began, and you decide what the team changes in its habits.

Where this fits

Three pieces of sales work, in this order.

This work sits inside sales management. A target, a review routine and someone who owns the number.

  1. Step 1

    Sales audit

    Find where deals are being lost and what to fix first.

    Start here if you cannot say where orders are lost.

  2. Step 2

    Sales process design

    One written way to sell, from first enquiry to repeat order.

    Start here if every salesperson sells differently.

  3. Step 3 · you are here

    Sales management

    A target, a review routine and someone who owns the number.

    Start here if the team has targets and no routine.

Tell us what you need Your brief is read before we call. Scope, fee and term in writing.

FAQ

Questions owners ask before they call.

Not here? More answers, or ask on WhatsApp.

Which CRM should we use?
One your team will open daily. Common choices in India include Zoho CRM and HubSpot. We help pick by the size of the team and the budget.
Can the CRM show dealer rate lists?
Keep rate lists separate and private. The CRM holds the relationship and the history, not the confidential price sheet for every viewer.
Can we keep drawings in the CRM?
Attach drawings to the enquiry record with the revision noted, so quotes use the right file. Large files may strain the storage, so check the plan. A shared folder linked from the record is a simple alternative.
Who updates the record when a dealer calls the factory?
Whoever takes the call, on the same day, in two lines. If calls go to the owner's phone, the history is lost. Agree one rule on who logs and let the dealer's record show the date of the last contact.
Can the CRM hold drawings from engineers?
It can hold links to them, and that is the safer choice. Drawings are large, change from one version to the next and may be confidential to the buyer. We store the drawing in a controlled folder and attach the link and version to the part record, so the tool room and the sales desk see the same file. Who may open the folder is a decision for you.
Who updates the record when a dealer rings the factory?
Whoever takes the call, on the same working day. If the call goes to the despatch office, we agree a simple way to pass the note to sales, such as a form on a phone. The point is that the dealer's last call is visible to the next person who rings them. Without a named habit, the record soon shows less than the team knows. We also set a short reminder in the record when a dealer call has been logged, so the next caller reads it before dialling.
How much does it cost?
There is no price list, because the work differs by business. The fee is scoped after we have read your brief and spoken to you, and put in writing before anything starts, split into our time, your media spend and production.
How long is the contract?
The term is agreed in writing after we have spoken, along with the fee and the reporting. It is never a default twelve months, and renewal is decided on the numbers against the baseline recorded at the start.
How soon will we see results?
It depends on the trade, the channel and what is already in place. After we have read your brief and spoken to you, we say what we would expect to move first and how it will be measured against the baseline. Nothing here is guaranteed.
Who will actually do the work?
The person you speak to before anything starts. We work from one office in Nagarbhavi, Bengaluru, with no account managers in between.

Your next practical step

Tell us what you are trying to grow, and we will read it before we call.

Eight short steps, mostly taps. Skip anything you would rather answer on the call.