Skip to content
GullySales

Surface treatment companies · Website

Build a site where an engineer finds the process, the alloy and the form in one visit.

A website for a surface treatment company is the set of pages where an engineer confirms you run a process, check what you accept and send an enquiry. GullySales works on the page structure, the technical detail and the enquiry form behind it.

Scope, fee, reporting and term are agreed in writing after we have read your brief and spoken to you.

Realistic editorial illustration of cnc machining companies at work in India

What website means

A website is the page a customer lands on after searching, clicking an advert or scanning a code, and it decides whether they call or leave. GullySales builds and maintains sites that load quickly, explain the offer plainly and make the enquiry form or phone number easy to find.

Last updated 14 Nov 2026.

For surface treatment companies

Where it usually goes wrong, and what we would do.

  • “The home page cannot hold every process”

    A single page listing all processes forces the engineer to scroll for the one that matters. A page for each process, reached from a simple menu, lets a visitor see anodising or passivation in a single click.

  • “Capability must be stated, not implied”

    Tank dimensions, maximum part length, accepted alloys, thickness range and colours belong on the page. When they are missing, the engineer assumes the answer is no and calls someone who published them.

  • “The quality pack needs a visible home”

    A quality head looking for a process flow, a sample certificate and your approvals should find them from the menu. A shop hiding its paperwork looks as if it has none.

  • “A slow, heavy site loses the shop floor”

    Visitors open the site on a phone beside a machine. Large images of tanks, a clumsy form or a missing click-to-chat link cost you the enquiry at the moment of interest.

What we do

What we deliver for surface treatment companies.

The work available for this need. We agree the deliverables and responsibilities for your engagement in writing.

  1. A site map built around processes

    A menu and page plan with one page per process, a capability page, a quality page and a contact page.

    Result: An engineer can reach any process in one click.

  2. A capability page with real limits

    Alloys, tank sizes, part lengths, thicknesses and colours, confirmed by your technical person.

    Result: A page that answers the first questions on a call.

  3. A quality and documents page

    The process flow, the checks you run and a sample treatment certificate, with a route to ask for more.

    Result: A quality head can see which documents travel with a lot.

  4. An enquiry form with the quote details

    A form asking for process, alloy, thickness, colour, size and quantity, with a drawing upload and a chat link.

    Result: Enquiries arrive ready to quote.

  5. Photographs that respect confidentiality

    Images of tanks, racks and sample panels, with no client part or name in frame.

    Result: A gallery that shows capacity and no secret.

  6. A phone-first layout

    Pages that read and load comfortably on a phone, with the call and chat buttons within reach.

    Result: A visitor on a phone can send an enquiry without pinching the screen.

How the result is measured

  • Page load time
  • Bounce rate
  • Enquiries from the website

Recorded as a baseline before work starts, so every later report has an honest comparison.

Searches your buyers type

Build the pages an engineer opens before sending a part.

anodising capability alloy and size
A capability page with the aluminium alloys and the largest part size you take, stated as limits. Do not leave them implied.
quality documents for coated parts
A page for the quality head listing what accompanies a lot and who signs. It saves a call before a trial is placed.
phosphating black oxide difference
A short page separating the processes so a designer writes the right note on the drawing.
surface treatment for fabricated parts
A fabricator page covering pickling and coating in one route, with the form of parts you accept.
request a quote for a trial lot
A form asking process, base metal, size, quantity and standard, with an upload that is optional.
surface treatment unit near the estate
A location block with the gate, receiving hours and contact for drivers, kept in step with the map listing.

Who it is for

This is written for these surface treatment companies.

  • Anodising shops for aluminium parts, hard and decorative
  • Phosphating and black oxide shops for steel and fasteners
  • Passivation and pickling shops for stainless steel
  • Chemical conversion coating on aluminium
  • Anti-rust and oil coating treatment for steel parts
  • PVD and vacuum coating studios
  • Descaling and rust removal units for fabricated and cast parts
  • In-house surface treatment units that take outside work

Before you decide

When this may not be the right fit.

  • You have not decided which alloys and sizes you will refuse, so a capability page would have nothing true to say.
  • The quality pack is rebuilt for each lot, so a documents page would promise a standard set you do not yet have.
  • A drawing sent through the site would sit in a mailbox nobody checks, so a quote form would lose the buyer.

Before you decide

Agree the work. Know how to judge it.

Website for surface treatment companies: use these checks to prepare, choose the scope, and review what changes.

Bring the right evidence

List the pages that support a buying decision and the actions visitors must complete. Keep examples of failed forms, unclear product information, and questions your team answers repeatedly.

Make the scope clear

Agree the page list, content ownership, integrations, and who controls the domain and hosting. Include redirects and existing search traffic in a redesign brief, before changing addresses.

Check the work in use

Complete a real enquiry journey on a phone and a laptop. Check that the confirmation appears, the enquiry reaches the right person, and tracking records the action once.

Know when to change course

If visitors can enquire but the team does not follow up, start with the sales handover. A larger website will not resolve that delay.

These are discussion points, not a fixed package. GullySales confirms the deliverables, responsibilities, fee, and term in writing after reading your brief and speaking with you.

Before we start

What to have ready before the work starts.

The records, access and decisions this work needs from surface treatment companies. Anything missing is noted in the written scope, with who will supply it.

Logins for domain and hosting
Access to the domain registrar, hosting and the site editor, held by the company. Without them we cannot launch or redirect. If a past designer holds them, ask for transfer now, since a launch stalls when nobody can change the settings.
Technical sheets for each process
A page or two per process stating alloys, finishes, size limits, racking method and reports you can issue. The pages are written from them. If they do not exist, the quality head writes them in plain words with us, and the site says nothing that sheet does not.
A list of documents you may publish
Certificates, registrations and approval letters you are allowed to show, with client names removed. The quality page needs them. If nothing can be shown, the page lists the documents available on request.
Photographs of the line, tanks and signboard
Phone photographs of the tanks, racks, packing area and the gate signboard. They prove the shop exists. Where the line cannot be shown, a sample panel and a signboard picture are used.
A person to answer the enquiry form
An estimator who opens each enquiry as it comes in. A site that brings drawings no one reads is worse than none. If nobody can be named, we hold the launch until someone is.

How it works

How the website work runs

The work itself, in order. How an engagement starts, from your brief to a written scope, is set out on our method page.

  1. 1

    Decide what an engineer must confirm on the site

    We start with the questions an engineer asks before sending a drawing: do you run this process, does it take my alloy, can my part fit the tank, can you give a report. Your quality head and estimator confirm the answers, and the production head adds the limits of each tank, such as length, depth and weight per rack. The site is planned to answer them in that order, and nothing else is built before they are answered.

  2. 2

    Photograph the line and the sample panel

    We plan a photo session or a brief for your team to cover the tanks, the racks, the packing area and a sample panel of finishes. Client parts are kept out of frame. Your owner approves the images. Real pictures of your own line are what separate the site from a directory page.

  3. 3

    Draw the site map around processes

    The map has a page for each process, a capability page with real limits, a quality and documents page, and an enquiry page. You approve it before design. Pages for processes you do not run are left out, and the home page points to each process page instead of trying to hold them all.

  4. 4

    Write the pages and build on a test site

    We write each page from your technical sheets, and your quality head reads every line. Your developer builds, or we brief one, on a test address. The enquiry form asks for process, material, quantity and a drawing or photograph. Nothing is released until you have read every page on a phone.

  5. 5

    Test the form, the speed and the phone view

    We send test enquiries from different phones and confirm they reach your estimator with the process and source recorded. We check that the photographs load on a mobile connection from an industrial area. Failures are fixed before launch, and you give the final approval.

  6. 6

    Launch, check live and hand over access

    On launch day we check old addresses redirect, the sitemap is sent, tracking works and forms arrive. You receive the logins and a short note on editing a page safely. Later we read the site data beside the enquiry book, against the figures recorded before the rebuild.

Where this fits

Three pieces of sales work, in this order.

This work sits inside sales process design, at stage 1, prospecting and lead generation. The audit comes before it, and sales management keeps it running.

  1. Step 1

    Sales audit

    Find where deals are being lost and what to fix first.

    Start here if you cannot say where orders are lost.

  2. Step 2 · you are here

    Sales process design

    One written way to sell, from first enquiry to repeat order.

    Start here if every salesperson sells differently.

  3. Step 3

    Sales management

    A target, a review routine and someone who owns the number.

    Start here if the team has targets and no routine.

Tell us what you need Your brief is read before we call. Scope, fee and term in writing.

FAQ

Questions owners ask before they call.

Not here? More answers, or ask on WhatsApp.

Should the site list our prices?
Rates depend on part, process and quantity, so a price list would mislead. The site should say what you need to quote and make that easy to send.
Can the site hold drawings safely?
The form can accept an upload, and we set it so files go only to the people you name. Check your customers' confidentiality terms before asking for sensitive drawings online.
Do we need a new site or a fix to the old one?
We read the current site first. If its structure already suits a page per process, we extend it. If not, rebuilding the structure costs less effort than patching.
Can the site show finished parts from named clients?
Only with the client's permission, and some sectors forbid it. Use sample panels and parts shot without customer marking. A named client on a public page can cost you the account and the next one in that sector.
Should the site list our rates?
No. Rates depend on process, alloy, lot size and finish, and a published figure will mislead. Say instead what the quote needs: the drawing, the material, the quantity and the finish. A buyer who sends those gets a proper answer, and the enquiry form is built to collect them.
Where should an uploaded drawing be stored?
The form can accept a drawing, but it should go to a protected folder, not a public page, and only the estimator and owner should open it. Drawings are confidential. Ask your developer to confirm how uploaded files are stored, and tell buyers on the form that the file is used for quotation only.
How long is the contract?
The term is agreed in writing after we have spoken, along with the fee and the reporting. It is never a default twelve months, and renewal is decided on the numbers against the baseline recorded at the start.
How soon will we see results?
It depends on the trade, the channel and what is already in place. After we have read your brief and spoken to you, we say what we would expect to move first and how it will be measured against the baseline. Nothing here is guaranteed.
Who will actually do the work?
The person you speak to before anything starts. We work from one office in Nagarbhavi, Bengaluru, with no account managers in between.
What do you need from us?
Your brief, and a conversation. After that, access to whatever this work touches, such as your website, your accounts or your enquiry record, and time with the people who handle your enquiries.

Your next practical step

Tell us what you are trying to grow, and we will read it before we call.

Eight short steps, mostly taps. Skip anything you would rather answer on the call.