Thermoforming companies · CRM
Keep every brief, sample and prototype in one record with a name beside it.
A CRM for a thermoforming company is one shared record of each buyer, the pack or panel they asked about, the sample sent and the next call due. GullySales sets up the fields and the habit so a brief does not live only in one person's phone.
Scope, fee, reporting and term are agreed in writing after we have read your brief and spoken to you.

What CRM means
A CRM is the record where every enquiry, call and quote is kept against a customer, replacing separate notebooks, spreadsheets and memory. GullySales sets up or cleans an existing CRM and reports from it by enquiry outcome rather than by activity logged.
Last updated 14 Nov 2026.
For thermoforming companies
Where it usually goes wrong, and what we would do.
“A brief on a phone leaves with the person”
Enquiries land on a founder's WhatsApp, a salesperson's email and a marketplace inbox. When that person is away or leaves, the buyer and the brief are gone. A single record keeps the history with the company.
“A sample is a sale in progress, not a favour”
Forming a sample costs sheet, tool time and effort. Without a record of who received it and what happened after, samples are given away and never followed up. The log turns each into a tracked opportunity.
“Seasonal buyers return only if remembered”
A sweet maker who ordered trays last festival should hear from you before the next. Without dates in a record, the repeat order goes to whoever phoned first.
“Heavy-gauge jobs run long and need a thread”
An OEM prototype can sit idle while the engineer tests it. A record that shows the stage, the contact and the last conversation keeps the job from going quiet.
What we do
What we deliver for thermoforming companies.
The work available for this need. We agree the deliverables and responsibilities for your engagement in writing.
Fields built for thermoforming
Pack or panel type, sheet, gauge, quantity, tool status and sample status, in place of a generic sales form.
Result: The desk records what a quote actually depends on.
A sample and prototype log
Each sample logged with the buyer, the date sent and the person who will ask about it.
Result: No sample goes out without a follow-up owner.
Import of existing enquiries
Contacts gathered from phones, email and marketplace inboxes into the one record.
Result: The buyer history sits in one place.
Stage definitions your team agrees
Clear names for brief received, sample made, tool quoted, tool approved and repeat supply.
Result: Everyone reads the same stage the same way.
A simple view for the owner
A short list of open briefs, samples awaiting a reply and repeat buyers due a call.
Result: The owner sees where attention is needed.
How the result is measured
- Enquiries logged in the CRM
- Data completeness
- Reports generated from CRM data
Recorded as a baseline before work starts, so every later report has an honest comparison.
Fields worth keeping
The fields a forming shop keeps on every brief, sample and mould.
- Product photograph and cavity sketch
- Attached by the estimator when the brief arrives. It lets any colleague open the record and see what is being formed without calling the owner.
- Sheet material and gauge
- Filled in by the estimator once the job is quoted. It lets the buyer's reorder be matched to the same sheet, and the stores plan sheet stock.
- Mould owner and storage place
- Who paid for the tool, whether it is the buyer's or the shop's, and where it sits. Filled in by the tooling head, it settles disputes before they begin.
- Sample status and the buyer's comment
- Sent, received, approved or rejected, with the comment recorded. The salesperson fills it in, and it shows which prototype the next quote must improve on.
- Season or reorder point
- The festival or launch the buyer orders for. It lets the shop write before the season and not after the buyer has found another maker.
Who it is for
This is written for these thermoforming companies.
- Food tray and sweet box makers
- Blister and clamshell pack makers
- Disposable cups, lids and containers
- Electronics and tool packaging tray makers
- Pharma and medical device tray makers
- Heavy-gauge panel and cover makers
- Vehicle interior and bodywork panel makers
- Signage, display and point-of-sale formers
Before you decide
When this may not be the right fit.
- Briefs arrive on three phones and nobody has agreed which one is the record, so a system would start out half empty.
- You handle a handful of regular jobs the owner remembers entirely, and a record would add typing without a decision.
Before you decide
Agree the work. Know how to judge it.
CRM for thermoforming companies: use these checks to prepare, choose the scope, and review what changes.
Bring the right evidence
List the records your team uses and show how an enquiry becomes an order today. Bring examples of duplicate entries, missing owners, and reports that require manual correction.
Make the scope clear
Agree the stages, required fields, access roles, and integrations before configuring the system. Separate software subscriptions from setup, data work, and training.
Check the work in use
Ask the people who will use the CRM to complete a real handover and find the next action without help. Check that the management report can be traced back to individual records.
Know when to change course
If the process is unclear, buying a more complex CRM adds more places for confusion. Start with the minimum fields and rules the team can use consistently.
These are discussion points, not a fixed package. GullySales confirms the deliverables, responsibilities, fee, and term in writing after reading your brief and speaking with you.
Before we start
What to have ready before the work starts.
The records, access and decisions this work needs from thermoforming companies. Anything missing is noted in the written scope, with who will supply it.
- The existing enquiry and quote files
- Whatever you use now, whether a register, spreadsheet or folder of quotation copies, must be handed over for import. Photocopies are fine if legible. When files are scattered across phones, we begin with those we can find, and buyers missing from the record are added as they call again.
- A list of moulds and who owns each
- Tools made for a customer raise questions of ownership, storage and reuse. A list of every mould you hold, the customer it was made for and what was agreed about it lets us build the fields correctly. Without it, the mould field stays blank and disputes are settled from memory.
- A named person to own the record
- One person must be responsible for keeping the CRM current, whether the owner or a salesperson. Their name goes into the setup. If ownership is shared by everyone, entries stop within a few weeks, and the record returns to the notebook.
- A decision on what you will not record
- Some owners do not want buyers' personal numbers or prices of competitors held in a shared tool. Tell us what stays out, and who may see what. If this is left open, access is set wide and later narrowed, which confuses the desk.
- Phone and email access for the desk
- Briefs arrive as messages on a personal phone. We need to know how messages reach each salesperson and which ones the owner permits us to connect. Without this, entries depend on hand copying, and the one habit the CRM needs is the one likeliest to be skipped.
How it works
How the CRM work runs
The work itself, in order. How an engagement starts, from your brief to a written scope, is set out on our method page.
- 1
Trace one job from brief to repeat order
We take a real job from your files, from the first message with a photograph through quote, sample, correction and order, and list every person who touched it and every place it was written down. You tell us where information was lost. This trace shows what the record must hold and who must update it.
- 2
Agree the stages in your own words
The sales desk and the owner decide what a brief, a quote sent, a sample made, a sample approved and a tool ordered should each be called. Heavy-gauge jobs that run long are given room for a thread of notes. You approve the list, since the stages have to match how your team already talks.
- 3
Set up the fields for packs and panels
We build the record around what you need to know: the product, the sheet, the quantity range, the sample sent and the date a repeat is likely. You decide which fields are required and which are optional. Fields for mould ownership are included, so a tool made for a buyer is never left unrecorded.
- 4
Move existing enquiries across and check them
Enquiry registers, messages and quote files are brought into the record by hand where there are only a few and by import where there are a lot. You and the desk check a sample of entries against the original papers. Duplicates and dead entries are marked, so the first screen shows live work and not the whole history.
- 5
Run a week of real briefs through it
The desk enters the new briefs in the CRM while keeping the old method alongside, and we watch what is missed. You decide what changes in the fields or stages. The sample log and the owner's view are checked by asking real questions: which samples are waiting, which repeat buyers are due.
- 6
Retire the old notebook and compare records
On the day you agree, the old register and the phone notes stop being the place of record. A named person owns the CRM. We set the first weeks of entries beside the count of briefs, samples and orders recorded before the work. Gaps are corrected and the stages adjusted, without promising any effect on sales.
Where this fits
Three pieces of sales work, in this order.
This work sits inside sales management. A target, a review routine and someone who owns the number.
Step 1
Sales audit
Find where deals are being lost and what to fix first.
Start here if you cannot say where orders are lost.
Step 2
Sales process design
One written way to sell, from first enquiry to repeat order.
Start here if every salesperson sells differently.
Step 3 · you are here
Sales management
A target, a review routine and someone who owns the number.
Start here if the team has targets and no routine.
FAQ
Questions owners ask before they call.
Not here? More answers, or ask on WhatsApp.
Do we need a paid CRM?
Who should update the record?
Can it hold marketplace enquiries?
Who owns a mould made for a customer, and where is that recorded?
Can the CRM hold the sample we sent and what the buyer said about it?
Will the owner be able to see everything without asking the desk?
How much does it cost?
How long is the contract?
How soon will we see results?
Who will actually do the work?
More for thermoforming companies
Related work to consider.
Closest to this: leads and follow-up
Also for thermoforming companies
Or start from the overview: sales and marketing for thermoforming companies.
Your next practical step
Tell us what you are trying to grow, and we will read it before we call.
Eight short steps, mostly taps. Skip anything you would rather answer on the call.