Skip to content
GullySales

VMC machining companies · CRM

Keep every RFQ, trial batch and call-off schedule in one record the team can read.

A CRM for a VMC shop is a single record of each buyer, each part, each quote and each trial batch, so that the next call is made from facts and not memory. GullySales works on choosing a simple tool, setting its stages to match machining sales and getting the team to use it.

Scope, fee, reporting and term are agreed in writing after we have read your brief and spoken to you.

Realistic editorial illustration of cnc machining companies at work in India

What CRM means

A CRM is the record where every enquiry, call and quote is kept against a customer, replacing separate notebooks, spreadsheets and memory. GullySales sets up or cleans an existing CRM and reports from it by enquiry outcome rather than by activity logged.

Last updated 14 Nov 2026.

For VMC machining companies

Where it usually goes wrong, and what we would do.

  • “The order book lives in the owner's head”

    Which RFQ is waiting, which trial batch is under inspection and which buyer promised a schedule are held by one person. When that person is on the shop floor, the follow-up does not happen.

  • “A spreadsheet works until it does not”

    A sheet suits a handful of accounts. With a long list of parts and several buyers per account, rows go stale and nobody knows which version is current.

  • “Stages should match how machining is sold”

    The steps are RFQ received, quoted, trial batch ordered, first article passed, schedule released. A generic sales funnel with leads and opportunities does not fit this path.

  • “Part history is the real asset”

    Drawing number, revision, cycle time and the price quoted decide the next quote. Without a record, the same part is quoted again from scratch and at a different rate.

What we do

What we deliver for VMC machining companies.

The work available for this need. We agree the deliverables and responsibilities for your engagement in writing.

  1. A pipeline built on your stages

    Stages from RFQ to schedule, each with a clear exit condition and an owner.

    Result: Everyone reads the same pipeline.

  2. Account and part records

    Each buyer with contacts, parts, drawing revisions, rates quoted and orders placed.

    Result: A quote starts from the last one.

  3. Reminders for the next action

    A due date on every open item, so a quoted RFQ or a delivered batch prompts a call.

    Result: No quote sits unchased.

  4. A simple tool choice

    A tool matched to your size and budget, in ordinary use in India, with the data in your own account.

    Result: The team can use it on a phone.

  5. Import of existing data

    Past buyers, quotes and orders cleaned and loaded so that the system is useful from the first day.

    Result: History is searchable.

  6. Short training for the team

    A walk-through for the owner, sales lead and the person who sends quotations.

    Result: The quotation sender and the sales lead each know their entries.

How the result is measured

  • Enquiries logged in the CRM
  • Data completeness
  • Reports generated from CRM data

Recorded as a baseline before work starts, so every later report has an honest comparison.

Fields worth keeping

Fields that make the order book readable by the whole team.

Part number and drawing revision
Filled by the estimator when the RFQ arrives. It lets anyone see what was quoted and on which revision, and stops repeated work on an old drawing.
Machine and fixture used
Filled by the production head after the trial. It shows which jobs suit which machine and lets you price the next order from experience.
Quote date, price and outcome
Filled by the sales owner. Builds a record of what won and lost, so a quote is priced from evidence and not memory.
Trial batch review status
Filled at dispatch and updated when the buyer replies. Shows batches waiting for a review that never came.
Call-off schedule and last delivery
Filled by the dispatch lead. Lets the owner spot a customer whose orders are slowing before the machines sit idle.

Who it is for

This is written for these VMC machining companies.

  • Casting and forging machining shops for pump and valve makers
  • Auto and commercial vehicle component machining units
  • Machine tool and special purpose machine part suppliers
  • Hydraulic block and manifold machinists
  • Electrical and switchgear part machining shops
  • Fixture-based batch production units
  • Job-work VMC shops selling machine hours
  • Machining units supplying railway and defence vendors

Before you decide

When this may not be the right fit.

  • The order book is in the owner's head and the owner will not enter data, so a CRM would always be out of date.
  • You have a handful of regular customers and one spreadsheet shows everything the owner needs to see.
  • Nobody checks the record, so jobs would be entered once and never updated.

Before you decide

Agree the work. Know how to judge it.

CRM for VMC machining companies: use these checks to prepare, choose the scope, and review what changes.

Bring the right evidence

List the records your team uses and show how an enquiry becomes an order today. Bring examples of duplicate entries, missing owners, and reports that require manual correction.

Make the scope clear

Agree the stages, required fields, access roles, and integrations before configuring the system. Separate software subscriptions from setup, data work, and training.

Check the work in use

Ask the people who will use the CRM to complete a real handover and find the next action without help. Check that the management report can be traced back to individual records.

Know when to change course

If the process is unclear, buying a more complex CRM adds more places for confusion. Start with the minimum fields and rules the team can use consistently.

These are discussion points, not a fixed package. GullySales confirms the deliverables, responsibilities, fee, and term in writing after reading your brief and speaking with you.

Before we start

What to have ready before the work starts.

The records, access and decisions this work needs from VMC machining companies. Anything missing is noted in the written scope, with who will supply it.

Every sheet where quotes are kept
Bring the spreadsheets, quotation folders and notebooks. We merge them. If quotes live only in a salesperson's phone, that person must share them, or the record starts without the live pipeline. Include the quotes sent as photographs of a handwritten sheet or as a message in a chat, because a buyer who received a quote that way still expects the shop to remember it, and the record must show the price, the date and the drawing revision.
A list of open RFQs and trial batches
Write down each open quote and trial batch with the buyer, the part and the last action. It seeds the pipeline. Without it, the record starts empty and the team keeps using the old sheet in parallel. For each item mark whether the drawing revision on the quote matches the one the buyer holds now, since a revised drawing changes the price and a record that hides the change will repeat the old figure.
Tally or ERP export of customers
Export the customer list from Tally or the ERP with addresses and contacts. We use it to avoid retyping. If you prefer we do not touch the accounts system, say so, and we work from a copy. Add the payment terms and the credit period agreed with each buyer, because the next call to a customer with an overdue invoice has to be planned differently, and the salesperson must see that before dialling.
A named owner of the record
One person must decide the stage names, approve new fields and remove users who leave. The owner or the sales head fits. With no owner, the tool slowly copies the old confusion.
A rule on who keeps customer records
Decide that customer records belong to the shop and not to the salesperson who entered them, and tell the sales team. When a salesperson leaves, the contacts must stay. Without the rule, the record is incomplete the first time someone resigns.

How it works

How the CRM work runs

The work itself, in order. How an engagement starts, from your brief to a written scope, is set out on our method page.

  1. 1

    Follow one RFQ from drawing to schedule

    We take a recent RFQ with the owner and the estimator and trace it: the drawing, the quote, the trial batch, the first article, the call-off. We write down who touched it, what was recorded and where. This shows the stages the record must carry and the points where a quote went quiet.

  2. 2

    Sort the buyers, parts and quotes into records

    We list what needs its own record: the buyer, the company, the part, the quote and the trial batch. The owner agrees the fields each needs, such as drawing number, material, quantity and quote date. We keep the list short, because fields nobody fills are removed at the first review.

  3. 3

    Name the stages as the shop sells

    We draw the stages in your words: drawing received, quoted, trial batch ordered, first article passed, schedule received. The owner and the salesperson check them against live jobs. Each stage gets an action that the person responsible must take next.

  4. 4

    Choose the tool and set the reminders

    We compare two or three simple tools against what the shop needs and what it already uses, including Tally, and the owner decides. We then set a reminder on each open quote and trial batch. The reminders name the person and the action, so the follow-up does not depend on someone remembering.

  5. 5

    Bring in the existing sheets and clean them

    We gather the spreadsheets, the quotation folder and the phone contacts, remove duplicates and mark each buyer with a last contact. Entries we cannot place are returned to you. Only the cleaned data goes into the new tool, and the old sheets are kept for reference.

  6. 6

    Run live jobs through it and review

    The salesperson and estimator enter live jobs for a trial period, and we watch where fields are skipped or stages do not fit. We change them. At the review we compare what the record shows with the old sheets, ask who owns it, and the owner decides the switch.

Where this fits

Three pieces of sales work, in this order.

This work sits inside sales management. A target, a review routine and someone who owns the number.

  1. Step 1

    Sales audit

    Find where deals are being lost and what to fix first.

    Start here if you cannot say where orders are lost.

  2. Step 2

    Sales process design

    One written way to sell, from first enquiry to repeat order.

    Start here if every salesperson sells differently.

  3. Step 3 · you are here

    Sales management

    A target, a review routine and someone who owns the number.

    Start here if the team has targets and no routine.

Tell us what you need Your brief is read before we call. Scope, fee and term in writing.

FAQ

Questions owners ask before they call.

Not here? More answers, or ask on WhatsApp.

Which CRM should a machining shop use?
One the team will open daily. We compare a few ordinary options against your size and phone habits, and choose the simplest that holds your stages.
Will it connect to our ERP or Tally?
Through an export where the tools allow. We check what you have first. The aim is to track sales, not replace accounting.
Who owns the data?
You do. The account is in your name and the records can be exported at any time.
Can the CRM link to Tally or our ERP?
Only through an export at first. Start by keeping the sales record separate and importing invoice totals by customer once in a while. A full link is worth building only after the team uses the record regularly and you know what you want from the numbers.
If a salesperson quits, who keeps the customer records?
The company. Keep the account in a shared tool with login per person, and record contacts there, not in private phones. When someone leaves, the account owner is reassigned and the history stays in place.
What should we record about a quote that was lost?
Record the reason the buyer gave, the shop that won it if you know, and the date. Price, delivery, a tolerance the shop would not take, or a drawing that was never revised are different reasons and call for different responses. Keep the field short, with a list of reasons and a line for notes, so the salesperson fills it in on the same call, with no separate sitting afterwards. Once enough quotes are closed the owner can read the reasons together, and a pattern shows which part family or which buyer type is costing you quotes.
How much does it cost?
There is no price list, because the work differs by business. The fee is scoped after we have read your brief and spoken to you, and put in writing before anything starts, split into our time, your media spend and production.
How long is the contract?
The term is agreed in writing after we have spoken, along with the fee and the reporting. It is never a default twelve months, and renewal is decided on the numbers against the baseline recorded at the start.
How soon will we see results?
It depends on the trade, the channel and what is already in place. After we have read your brief and spoken to you, we say what we would expect to move first and how it will be measured against the baseline. Nothing here is guaranteed.
Who will actually do the work?
The person you speak to before anything starts. We work from one office in Nagarbhavi, Bengaluru, with no account managers in between.

Your next practical step

Tell us what you are trying to grow, and we will read it before we call.

Eight short steps, mostly taps. Skip anything you would rather answer on the call.