Arbitration and mediation firms · Lead generation
Bring in the right disputes, not every enquiry that mentions a clause.
Lead generation for an arbitration or mediation firm means reaching the lawyers, companies and contract drafters who can name you or refer a matter. GullySales works on the pages, outreach lists and enquiry sheet that point those people to the disputes you actually run.
Scope, fee, reporting and term are agreed in writing after we have read your brief and spoken to you.

What lead generation means
Lead generation is the combined work of every channel that brings in a new enquiry, whether from search, adverts, referrals or a stall at an exhibition. GullySales runs these channels together and reports the number of enquiries each one produced, not the activity behind it.
Also for arbitration and mediation firms
- CRM for arbitration and mediation firms
- Follow-up systems for arbitration and mediation firms
- SEO for arbitration and mediation firms
- Local SEO for arbitration and mediation firms
- Social media for arbitration and mediation firms
- Content marketing for arbitration and mediation firms
- Buyer persona for arbitration and mediation firms
- WhatsApp for arbitration and mediation firms
Sales and marketing for arbitration and mediation firms, the overview.
Plan the next part of the work
Last updated 21 Nov 2026.
For arbitration and mediation firms
Where it usually goes wrong, and what we would do.
“An enquiry may come from a lawyer, not a party”
The person who writes first is frequently counsel for one side, checking whether you can take a matter. That enquiry needs a different reply from a small business owner asking about a stalled payment. Sorting them on arrival decides who answers and what is sent.
“A dispute that is outside your rules wastes a sitting”
A matter arrives with a clause naming another institution, or a seat you do not administer. If the website never says which matters you take, registry staff spend time on enquiries they must decline. A plain scope statement filters before the phone rings.
“Mediation leads come from a decision to try, not a search”
A company rarely searches for a mediator until counsel has suggested one. The lead is therefore created in the lawyer's office, and your job is to make the suggestion easy to pass on, with a short note describing what mediation asks of each side.
“Referrals need a record or they stay accidental”
Counsel who mention you once may never do so again if nobody thanks them or learns what became of the matter. A register of who referred what, kept inside confidentiality limits, shows which relationships deserve another visit.
What we do
What we deliver for arbitration and mediation firms.
The work available for this need. We agree the deliverables and responsibilities for your engagement in writing.
Scope statement for enquirers
A short page and form text saying which disputes, seats and rules you administer or sit under, and which you do not.
Result: Registry staff can point an unsuitable enquirer to the scope page instead of explaining it each time.
Enquiry sheet with a source column
One sheet recording who wrote, whether counsel or party, the dispute type, the clause and how they found you.
Result: Each filed matter can be traced back to the first contact that led to it.
Counsel-facing note on what you take
A one-page sheet a lawyer can forward to a client, stating matters handled, how a matter is started and what papers are needed.
Result: Counsel can brief a client about you without a call.
Referral register
A log of counsel and bodies who sent matters or named you, with the date of the last conversation, kept without client details.
Result: The register shows which referrers have not heard from you for the longest.
Outreach list by dispute type
Commercial lawyers and in-house teams grouped by the disputes they draft for, such as construction or shareholder agreements.
Result: Each group has a note written around its own kind of contract.
How the result is measured
- Relevant enquiries by source
- Duplicate and unsuitable enquiries
- Time to the first response
- Accepted enquiries reaching an agreed next step
Recorded as a baseline before work starts, so every later report has an honest comparison.
What to capture or send
Record what a drafter or party tells you at first contact.
A dispute enquiry is useful only when the clause and the stage are on the record from the first message.
- Clause wording as written
- Ask for the dispute clause itself, since a missing or unclear reference to the seat or the rules decides whether the firm can act at all.
- Seat and venue named in the contract
- Note the city in the clause so you know whether sittings are practical or the matter belongs with another forum.
- Role of the sender
- Record whether the sender is counsel, a party or a contract drafter, because a drafter asking for model clauses needs a different reply from a party holding a served notice.
- Stage of the dispute
- Mark whether the clause is still being drafted, a notice has gone out or a claim is ready to file, as each stage gets a different next step from you.
- Amount in dispute as the sender describes it
- Take the sender's own description of the sum involved, so the reply points to the right procedure without quoting a fee over chat.
Who it is for
This is written for these arbitration and mediation firms.
- Institutional arbitration centres
- Commercial mediation centres and private mediators
- Boutique arbitration practices with senior arbitrators
- Construction and infrastructure dispute resolution firms
- Online dispute resolution platforms
- Shipping and trade arbitration practices
- Family and community mediation services
- Arbitrator panels attached to chambers of commerce
Before you decide
When this may not be the right fit.
- Your rules and panel are not yet written down, so a party who writes in would get no clear answer on what happens next.
- No one at the firm is free to read a clause and reply with a next step, so enquiries would sit unanswered.
Before you decide
Agree the work. Know how to judge it.
Lead generation for arbitration and mediation firms: use these checks to prepare, choose the scope, and review what changes.
Bring the right evidence
Define the organisations or buyers you can serve and the reasons they would consider a conversation. Bring examples of accepted and rejected prospects so the selection rule is visible.
Make the scope clear
Agree the research sources, contact approach, qualification rules, and handover. Clarify which meetings count as accepted and what happens to replies that are not ready to buy.
Check the work in use
Review why a prospect was selected and what was learned from the response. Count held, relevant conversations separately from contacts found, messages sent, or meetings booked.
Know when to change course
If the same objection appears repeatedly, adjust the offer or buyer group before increasing outreach. Respect a request to stop contact and keep the exclusion in the record.
These are discussion points, not a fixed package. GullySales confirms the deliverables, responsibilities, fee, and term in writing after reading your brief and speaking with you.
Before we start
What to have ready before the work starts.
The records, access and decisions this work needs from arbitration and mediation firms. Anything missing is noted in the written scope, with who will supply it.
- The register of matters opened
- We need the list of matters you opened, with the date and the first contact for each. A rough list is acceptable if the source is noted. Without it, the plan rests on guesses about who sends work, and we say so.
- A decision on disputes you refuse
- Only the principals can say which dispute types, values and rule sets you will not take. Written down, even briefly, it lets the scope note work. If it is missing, enquirers will be turned away by whoever happens to answer.
- A named person to answer enquiries
- Someone must be assigned to read the enquiry inbox and the form. A partner or an administrator both work. If nobody is named, the test enquiry stalls on the first day it is sent and the sheet stays empty.
- Your own adviser's view on wording
- Statements about a legal service are for your own counsel or professional body to settle. Have that person reachable to read the scope note. Without that read, we publish only the plainest description of what you take.
- A list of lawyers who have sent work
- Names of counsel and companies who have proposed you, even if the list is short and in your head. We turn it into the outreach list and the referral register. Without it, outreach starts cold and is narrower.
How it works
How the lead generation work runs
The work itself, in order. How an engagement starts, from your brief to a written scope, is set out on our method page.
- 1
Read the last matters' first contacts
We start with the register of matters you opened and note how each first contact arrived: a clause, a counsel's call, a referral, a court order. You tell us which of those you want more of and which you would refuse, and that sets the target. We keep this list short.
- 2
Fix which disputes you will refuse
You decide the dispute types, values and rule sets you can actually run, and the ones outside your rules. We write these as plain lines the whole firm can read, so a refusal becomes an answer given the same way each time, not a mood.
- 3
Draft the scope note for enquirers
We write the short statement that tells a lawyer or company what you take, what you pass on and what papers you need to see first. You read it as counsel would, strike anything your own adviser dislikes, and approve the final wording.
- 4
Build the enquiry sheet and referral register
We set up one sheet where every enquiry lands with its source, its sender's role and its dispute type, and a second register for referrers. You nominate who fills them in, because a source nobody records stays a guess.
- 5
Send a test enquiry through the whole route
A colleague of yours writes in as a company would, and another as counsel would. We follow each message to the person who answers, the reply sent and the row filled, and fix whatever stalls before any real enquirer meets it.
- 6
Read sources against the starting record
We compare the filled sheet with the first-contact record from the start of the work, in your own terms: enquiries, appointments, filed matters and refusals, by source. You then choose which source gets more attention and which is dropped.
Where this fits
Three pieces of sales work, in this order.
This work sits inside sales process design, at stage 1, prospecting and lead generation. The audit comes before it, and sales management keeps it running.
Step 1
Sales audit
Find where deals are being lost and what to fix first.
Start here if you cannot say where orders are lost.
Step 2 · you are here
Sales process design
One written way to sell, from first enquiry to repeat order.
Start here if every salesperson sells differently.
Step 3
Sales management
A target, a review routine and someone who owns the number.
Start here if the team has targets and no routine.
FAQ
Questions owners ask before they call.
Not here? More answers, or ask on WhatsApp.
Can we advertise to get disputes?
Which source of leads matters first for a new firm?
Do we need paid ads?
What should we do with enquiries about disputes we cannot take?
Who writes to the lawyers and companies on the outreach list?
How much does it cost?
How long is the contract?
How soon will we see results?
Who will actually do the work?
What do you need from us?
More for arbitration and mediation firms
Related work to consider.
Closest to this: leads and follow-up
Also for arbitration and mediation firms
Or start from the overview: sales and marketing for arbitration and mediation firms.
Your next practical step
Tell us what you are trying to grow, and we will read it before we call.
Eight short steps, mostly taps. Skip anything you would rather answer on the call.