Skip to content
GullySales

Business compliance consultants · CRM

Keep a record that knows when each licence falls due.

A CRM for a compliance consultant holds each client, the licences you look after and the month each one comes up again. GullySales sets one up that your team will actually fill, and shapes it around renewals as much as new enquiries.

Scope, fee, reporting and term are agreed in writing after we have read your brief and spoken to you.

Realistic editorial illustration of chartered accountants and accounting firms at work in India

What CRM means

A CRM is the record where every enquiry, call and quote is kept against a customer, replacing separate notebooks, spreadsheets and memory. GullySales sets up or cleans an existing CRM and reports from it by enquiry outcome rather than by activity logged.

Last updated 14 Nov 2026.

For business compliance consultants

Where it usually goes wrong, and what we would do.

  • “The renewal date is the most valuable field”

    A licence has a due period and a returns calendar. When the record holds it, the next conversation with the client is yours to start. When it sits in one partner's diary, it goes with them.

  • “Enquiries and clients live in different books”

    A caller from last spring and a client of ten years should both be found by name. A single record lets a partner see who spoke to whom, what was quoted and what stalled. Write it down once so the whole team answers alike.

  • “A quiet year looks like a year that needed no one”

    The owner sees nothing happen and wonders what the fee was for. A record of notices filed, licences renewed and returns done gives the renewal call something concrete to say. Every partner then has the same account to quote.

  • “The tool must be easy for juniors”

    If entering a call takes longer than a diary line, it will not be filled. Keep the fields few and agreed, and start with a sheet if that is what the team will use. Begin with the trades your records cover best.

What we do

What we deliver for business compliance consultants.

The work available for this need. We agree the deliverables and responsibilities for your engagement in writing.

  1. A field list agreed with your partners

    Source, trigger, trade, state, licences held, quote, status and renewal period, no more.

    Result: Every record carries the same facts.

  2. Pipeline stages in your own words

    Stages such as first call, gap list sent, proposal sent, engaged and due for renewal.

    Result: A partner reads the stage and knows the next step.

  3. Import of existing clients

    Existing client names and licences moved into the record, with gaps flagged for your team to fill.

    Result: Your current work is in one place.

  4. Renewal view

    A list of engagements and licences falling due, sorted by the period they come up.

    Result: Renewal calls are started by you.

  5. Short training for the team

    A walk-through for partners and juniors on adding a call and updating a stage.

    Result: People know what to enter and when.

How the result is measured

  • Enquiries logged in the CRM
  • Data completeness
  • Reports generated from CRM data

Recorded as a baseline before work starts, so every later report has an honest comparison.

Fields worth keeping

Keep the fields that tell you what falls due and for which client.

Trade and state
Entered at the first call, and lets you pull every hotel in one state when a rule changes.
Licence and registration list
Filled from the owner's documents at the first meeting, and shows each one with its number and holder.
Renewal and return due dates
Set by the consultant for each licence, and lets the team see what falls due this period before the owner remembers.
Inspector or office contact
Recorded by whoever attended, with the office and the date of the visit, so the next visit starts informed.
Engagement type
Marked as one-off notice reply, set-up or yearly engagement, so the team knows which clients to speak to about renewing.

Who it is for

This is written for these business compliance consultants.

  • Small factories and workshops with a first factory licence
  • Hotels, restaurants and cloud kitchens with several licences
  • Retail chains and showrooms across several states
  • Schools and training institutes with staff and building rules
  • Hospitals and clinics with consents and biomedical waste authorisations
  • Warehouses and logistics operators
  • Contractors who supply labour and need licences and registers
  • Startups and offices crossing a headcount threshold

Before you decide

When this may not be the right fit.

  • You have fewer than a handful of clients and a spreadsheet already shows what falls due for each.
  • No one will enter due dates when a licence is issued, so the record would warn about nothing.

Before you decide

Agree the work. Know how to judge it.

CRM for compliance consultants: use these checks to prepare, choose the scope, and review what changes.

Bring the right evidence

List the records your team uses and show how an enquiry becomes an order today. Bring examples of duplicate entries, missing owners, and reports that require manual correction.

Make the scope clear

Agree the stages, required fields, access roles, and integrations before configuring the system. Separate software subscriptions from setup, data work, and training.

Check the work in use

Ask the people who will use the CRM to complete a real handover and find the next action without help. Check that the management report can be traced back to individual records.

Know when to change course

If the process is unclear, buying a more complex CRM adds more places for confusion. Start with the minimum fields and rules the team can use consistently.

These are discussion points, not a fixed package. GullySales confirms the deliverables, responsibilities, fee, and term in writing after reading your brief and speaking with you.

Before we start

What to have ready before the work starts.

The records, access and decisions this work needs from business compliance consultants. Anything missing is noted in the written scope, with who will supply it.

Every sheet and diary that holds client dates
Spreadsheets, wall calendars, email reminders and a partner's notebook all count. We need to see them even if untidy. Without this, the renewal view starts incomplete, and a client whose date is missing will be forgotten by the very system meant to prevent that.
Copies of licences for a sample of clients
A few copies let us check the dates in your sheet against the real documents. Copies with sensitive details covered are fine. If none is shared, we cannot confirm the dates, and an error carried into the CRM could cause a missed renewal.
Your team's own words for each stage
Write the stages as your staff say them, from first call to renewal. Natural words keep the tool easy to learn. If left blank, we propose stages and you correct them against a recent engagement, which takes longer than writing them yourselves.
A decision on who may see which clients
Client matters are private, so decide whether every junior sees every client or only those they handle. Partners and juniors need different access. When this is missing, we set the strictest rule and widen it later, which can frustrate staff in the first days.
Two juniors willing to try it first
Name the people who will test the tool on real work and tell us honestly where it is hard. They need not be technical. Without them, partners approve a setup that juniors then avoid, and the record fills slowly.

How it works

How the CRM work runs

The work itself, in order. How an engagement starts, from your brief to a written scope, is set out on our method page.

  1. 1

    Draw the path from first call to renewal

    We sit with the partners and trace one engagement from the first call to the renewal date: enquiry, meeting, proposal, engagement, filing, inspection support and renewal. You say where work stalls and where juniors hand over. This real path, in your own words, becomes the pipeline stages of the CRM.

  2. 2

    List the fields that decide a renewal

    We agree the fields the record must hold: the licences in force, the state, the date each comes up, the person who signs, the last inspection and the partner in charge. You cross out any field your team will not fill. The shortest list that still reminds you of a due date is the one that stays.

  3. 3

    Gather the client files into one sheet

    We collect the spreadsheets, diaries and email folders that hold client names and licence dates, and combine them into one sheet. You check a sample against the actual licence copies. Duplicates and wrong dates are corrected here, because an error in a due date becomes a missed renewal.

  4. 4

    Set up the stages and the renewal view

    The CRM is configured with your stages, the agreed fields and a view that lists licences by the month they come up. You open it as a partner and as a junior and tell us what confuses. Names for stages stay in your words, so that nobody needs a manual.

  5. 5

    Load the clients and test with real work

    The first batch of clients is imported and checked against your sheet. A junior then enters a new enquiry and a renewal from start to finish while we watch where they hesitate. Anything that slows them is simplified, since a tool that annoys juniors will not be filled.

  6. 6

    Check the renewal list against your files

    After the team has used it, we compare the renewal view with the licences you know are due, and the pipeline report with the engagements you had before. You confirm the dates match. Together we decide who gets access, what training remains and what to add next.

Where this fits

Three pieces of sales work, in this order.

This work sits inside sales management. A target, a review routine and someone who owns the number.

  1. Step 1

    Sales audit

    Find where deals are being lost and what to fix first.

    Start here if you cannot say where orders are lost.

  2. Step 2

    Sales process design

    One written way to sell, from first enquiry to repeat order.

    Start here if every salesperson sells differently.

  3. Step 3 · you are here

    Sales management

    A target, a review routine and someone who owns the number.

    Start here if the team has targets and no routine.

Tell us what you need Your brief is read before we call. Scope, fee and term in writing.

FAQ

Questions owners ask before they call.

Not here? More answers, or ask on WhatsApp.

Do we need paid CRM software?
Not at the start. A well-kept sheet can hold a small practice. Move to a tool when the number of clients makes the sheet hard to search. We help you choose one that is in ordinary use in India.
Is client data safe in a CRM?
That depends on the tool and your own practice. Keep client papers out of it, limit who can see records and review the tool's data terms. Your partners should approve what is stored.
How do we keep due dates from going out of date?
Enter the date when the licence or return is issued, not when it is remembered. Assign a named person per client and let the record show who last updated it. Rules and fees change, so check the official source at each renewal.
Can the record show what we found in an inspection?
Keep a factual note of what was asked for and what was missing, with no opinion of the officer. Notes can be seen by colleagues and may be asked for later. Limit access to those who need it and keep client papers out of the record.
Can the CRM remind me when a licence is due?
Yes, if the due date is stored as a field and a reminder is attached to it. The tool does not know when a licence expires. You or your team enter the date from the licence copy, and the tool prompts you before it. The reminder points to the client, the licence and the partner in charge. Because rules and renewal periods differ by state and licence, the date is always taken from the document, never worked out by the tool, and a junior checks it against the copy.
Where should enquiries and clients live?
In one record, with a different stage, so a client who comes back is not entered a second time. An enquiry becomes a client when the engagement is signed, and the same company then carries its licences and renewal dates. This lets a quiet year be visible: a client with no activity is listed instead of forgotten. We set it up so a junior can see both the enquiry history and the licences in force on a single screen.
How much does it cost?
There is no price list, because the work differs by business. The fee is scoped after we have read your brief and spoken to you, and put in writing before anything starts, split into our time, your media spend and production.
How long is the contract?
The term is agreed in writing after we have spoken, along with the fee and the reporting. It is never a default twelve months, and renewal is decided on the numbers against the baseline recorded at the start.
How soon will we see results?
It depends on the trade, the channel and what is already in place. After we have read your brief and spoken to you, we say what we would expect to move first and how it will be measured against the baseline. Nothing here is guaranteed.
Who will actually do the work?
The person you speak to before anything starts. We work from one office in Nagarbhavi, Bengaluru, with no account managers in between.

Your next practical step

Tell us what you are trying to grow, and we will read it before we call.

Eight short steps, mostly taps. Skip anything you would rather answer on the call.