Skip to content
GullySales

Operations consultants · CRM

Keep every enquiry, referrer and proposal in one place, each with a next call.

A CRM for an operations consultant is a single record of enquiries, referrers, diagnostics and proposals with the next step against each. GullySales sets up a simple one that fits a small consultancy, using a tool already in ordinary use in India.

Scope, fee, reporting and term are agreed in writing after we have read your brief and spoken to you.

Realistic editorial illustration of business consultants at work in India

What CRM means

A CRM is the record where every enquiry, call and quote is kept against a customer, replacing separate notebooks, spreadsheets and memory. GullySales sets up or cleans an existing CRM and reports from it by enquiry outcome rather than by activity logged.

Last updated 14 Nov 2026.

For operations consultants

Where it usually goes wrong, and what we would do.

  • “Memory is the system”

    A consultant carries enquiries in their head and in a phone's call log. When a project fills the diary, the three owners who called last week slip out of mind.

  • “Referrers are contacts, not just names”

    A CA who sent two clients deserves a note when a project closes. Without a record of who referred whom, the thanks never reaches them.

  • “Proposals need a status”

    Sent, read, discussed, on hold, lost. Without that, every open proposal looks equally alive and none gets a considered call.

  • “A heavy tool is abandoned”

    A CRM with thirty fields will not be filled in after a site visit. A few fields entered on the phone beat a complete record that is empty.

What we do

What we deliver for operations consultants.

The work available for this need. We agree the deliverables and responsibilities for your engagement in writing.

  1. A pipeline built to your stages

    Stages such as enquiry, first call, diagnostic, proposal and signed, set to how you actually work.

    Result: You can see how many sit at each stage.

  2. A small set of fields

    Owner name, sector, symptom, source, referrer, next call and reason, and nothing more at the start.

    Result: A record takes a minute to fill after a call.

  3. A referrer view

    A list of CAs, bankers and vendors with the clients each has sent and the last time you wrote.

    Result: You know whom to thank and whom to update.

  4. A proposal log

    Each proposal with its date, scope, status and the reason to call next.

    Result: No proposal waits without a reason attached.

  5. Import of existing contacts

    Your past clients and old enquiries brought in from sheets and phones, so the first view is not empty.

    Result: Past contacts sit in the record from day one.

How the result is measured

  • Enquiries logged in the CRM
  • Data completeness
  • Reports generated from CRM data

Recorded as a baseline before work starts, so every later report has an honest comparison.

Fields worth keeping

The fields that keep an enquiry, a referrer and a proposal from being lost.

Stage and next call date
Enquiry, diagnostic, proposal, signed or lost, with the date of the next contact. Whoever spoke last fills it, and it replaces memory as the system.
The delay named
The symptom in the owner's words. Entered at the first call, it lets you search every past case of the same problem and reuse what you learned.
Sector and number of people on the floor
Filled from the first call, it shows which sectors bring enquiries that convert, and which you should decline.
Referrer and what they were told
The accountant or past client who sent the owner. Record it, as it lets you thank them and see whose referrals turn into engagements.
Proposal status and decision-makers
Sent, under discussion or declined, with the names who decide. It shows where a proposal is waiting on a family or a board.

Who it is for

This is written for these operations consultants.

  • Small and mid-sized manufacturers with a shop floor of fifty to a few hundred people
  • Auto component and engineering job-work units
  • Packaging, plastics and printing units with changeover and wastage problems
  • Multi-branch service businesses such as diagnostics, clinics and service centres
  • Distributors and trading firms with warehouse and dispatch delays
  • Restaurants, cloud kitchens and catering firms with kitchen and delivery flow
  • Hospitals and nursing homes with admission, billing and discharge delays
  • Family-run businesses where the second generation wants systems in place

Before you decide

When this may not be the right fit.

  • You handle a handful of enquiries in a year, and a notebook beside the phone does the work of a tool.
  • Nobody will enter a call within the day, and a record that is stale is worse than none.

Before you decide

Agree the work. Know how to judge it.

CRM for operations consultants: use these checks to prepare, choose the scope, and review what changes.

Bring the right evidence

List the records your team uses and show how an enquiry becomes an order today. Bring examples of duplicate entries, missing owners, and reports that require manual correction.

Make the scope clear

Agree the stages, required fields, access roles, and integrations before configuring the system. Separate software subscriptions from setup, data work, and training.

Check the work in use

Ask the people who will use the CRM to complete a real handover and find the next action without help. Check that the management report can be traced back to individual records.

Know when to change course

If the process is unclear, buying a more complex CRM adds more places for confusion. Start with the minimum fields and rules the team can use consistently.

These are discussion points, not a fixed package. GullySales confirms the deliverables, responsibilities, fee, and term in writing after reading your brief and speaking with you.

Before we start

What to have ready before the work starts.

The records, access and decisions this work needs from operations consultants. Anything missing is noted in the written scope, with who will supply it.

Every list of contacts you keep
Phone contacts, a mail address book, a notebook and any spreadsheet, shared in whatever form. We combine them. A system built on part of your contacts will be abandoned when you find the rest missing. Tell us which of these belong to the firm and which are personal, so that a family number is not imported by mistake.
A statement of your stages in your own words
A few lines from you on how an enquiry moves to work. We turn it into stages. If you cannot describe it, we trace the last three engagements to find it. Include the stage where enquiries fall away, if you know it.
A decision on where the data sits
Whether the records live in a sheet, a tool you already pay for, or a new one. Confidential client details should not sit in a shared inbox. If you are unsure, we start with a sheet. Tell us also whether a partner or assistant needs to see the records, since access follows from that.
A list of proposals sent in the past year
Proposals with date, client and outcome. The log starts from them. If proposals were verbal, tell us which and we record them as such. Add the scope in a line and the fee basis only if you wish to record it.
Time for the first few updates
A few minutes after each call for the first weeks, to enter the details. A CRM fills only if it is used. If you cannot give that, an assistant should, and we set the routine for them. Say who covers the entry when you are on a plant floor without a signal.

How it works

How the CRM work runs

The work itself, in order. How an engagement starts, from your brief to a written scope, is set out on our method page.

  1. 1

    Collect where your contacts live today

    We ask where enquiries, referrers and proposals are kept: a phone, a diary, a mail folder, a spreadsheet. We copy what exists into one working sheet and mark duplicates. You tell us whose contact details are personal and whose belong to the firm. We also note which contacts a former partner or employee might still hold, so nothing is lost when staff change.

  2. 2

    Write your stages as you really work

    We sit with you and write the stages from first enquiry to proposal accepted: first call, plant visit, diagnostic, proposal sent, decision, started. The names are yours. Each stage has a plain test, such as proposal sent and acknowledged, so no entry sits in a stage it left. If a proposal takes a family to decide, the stage says so, and the next step is a date for a gentle call, not a chase.

  3. 3

    Keep a short list of fields

    We agree the handful of fields you will fill after every call: the person, the company, the sector, the symptom, the source and the next step with its date. Anything else is dropped. A heavy form is abandoned, so the list stays small. Because you will fill them from a phone between visits, each field is a short pick-list or a single line, never a paragraph.

  4. 4

    Build the referrer view

    A separate view lists accountants, bankers and other advisers who have sent you owners, with the enquiries each has sent, the ones that became work and the last time you spoke. You decide how to thank or update each. The view turns names into relationships. Each referrer also has a line for how they prefer to be updated, whether by a call, a mail or a visit, and whether they like to know the result of an introduction.

  5. 5

    Add the proposal log with its status

    Each proposal is recorded with the date, the scope in a line, the person who received it and a status: waiting, being discussed with family, declined, accepted. You update it after every contact. A proposal with no status is a lost one. Declined proposals stay in the log with the stated reason, because the reasons are the part of the log you will return to.

  6. 6

    Import contacts and read the first entries

    We import your existing contacts into the sheet or tool and check the first weeks of entries with you. We compare the enquiries and proposals recorded with the counts noted before the work began, and remove any field you did not fill. Contacts that cannot be traced to a person or a company are set aside for you to look at, not imported.

Where this fits

Three pieces of sales work, in this order.

This work sits inside sales management. A target, a review routine and someone who owns the number.

  1. Step 1

    Sales audit

    Find where deals are being lost and what to fix first.

    Start here if you cannot say where orders are lost.

  2. Step 2

    Sales process design

    One written way to sell, from first enquiry to repeat order.

    Start here if every salesperson sells differently.

  3. Step 3 · you are here

    Sales management

    A target, a review routine and someone who owns the number.

    Start here if the team has targets and no routine.

Tell us what you need Your brief is read before we call. Scope, fee and term in writing.

FAQ

Questions owners ask before they call.

Not here? More answers, or ask on WhatsApp.

Which CRM should we use?
One you will open. Pick a tool in ordinary use in India that works on the phone and fits your budget; we set it up round your stages rather than the other way.
Can the CRM hold confidential client details?
Keep sensitive plant data out of it. Record the contact, sector and conversation, and store engagement files where you already keep them securely.
Who maintains it?
You or your assistant, through a short routine after each call. We set up the structure and show you the routine.
How do we record confidential client details safely?
Keep names and commercial details in the CRM only as far as needed, limit access to the people on the engagement and leave sensitive files in a separate folder. Confidentiality is a promise to the client, so check that your terms of engagement allow storage in the tool.
Is it safe to put client details into a CRM?
Keep the CRM to enquiries, referrers and proposals, and leave out anything a client has told you in confidence. A name, a sector and a next step are enough. If you must record sensitive details, keep them in the files for the engagement, with their own access. Check with your own adviser what your contracts require. Entries should name the person and the company and the next step, and leave out numbers a client gave you in confidence.
Which CRM tool should a small consultancy buy?
Possibly none yet. A well-built sheet with clear stages and a referrer view serves a consultancy of one or two people. We recommend a tool only when you have several people updating records or want reminders sent. The stages matter more than the software, and we set them first.
How much does it cost?
There is no price list, because the work differs by business. The fee is scoped after we have read your brief and spoken to you, and put in writing before anything starts, split into our time, your media spend and production.
How long is the contract?
The term is agreed in writing after we have spoken, along with the fee and the reporting. It is never a default twelve months, and renewal is decided on the numbers against the baseline recorded at the start.
How soon will we see results?
It depends on the trade, the channel and what is already in place. After we have read your brief and spoken to you, we say what we would expect to move first and how it will be measured against the baseline. Nothing here is guaranteed.
Who will actually do the work?
The person you speak to before anything starts. We work from one office in Nagarbhavi, Bengaluru, with no account managers in between.

Your next practical step

Tell us what you are trying to grow, and we will read it before we call.

Eight short steps, mostly taps. Skip anything you would rather answer on the call.