Skip to content
GullySales

Commercial property brokers · CRM

Hold every requirement, vacancy and lease date in one place the team can read.

A CRM for a commercial broker is the shared record of requirements, vacancies, owners, tours and lease end dates, replacing chats and personal phones. GullySales works on setting up the fields, stages and reminders to fit how a brokerage actually runs.

Scope, fee, reporting and term are agreed in writing after we have read your brief and spoken to you.

Realistic editorial illustration of property management companies at work in the United States

What CRM means

A CRM is the record where every enquiry, call and quote is kept against a customer, replacing separate notebooks, spreadsheets and memory. GullySales sets up or cleans an existing CRM and reports from it by enquiry outcome rather than by activity logged.

Last updated 14 Nov 2026.

For commercial property brokers

Where it usually goes wrong, and what we would do.

  • “Two pipelines, not one”

    A requirement moves from brief to shortlist to tour to negotiation. A vacancy moves from mandate to listing to viewings to signing. One list for both hides the work behind each, so keep them apart and link them.

  • “The contact is the stock”

    A broker's real asset is the list of owners and occupiers with their history. When a person leaves with their phone, that list goes too. The CRM keeps it with the firm.

  • “Lease dates drive repeat work”

    A renewal or relocation comes round when the lease nears its end. A date that sits only in one person's memory is missed, and another broker makes the call.

  • “Too many fields stop the entry”

    A form with thirty boxes goes unfilled. The record should hold what is needed to match, follow up and report, and nothing more at first.

What we do

What we deliver for commercial property brokers.

The work available for this need. We agree the deliverables and responsibilities for your engagement in writing.

  1. Requirement and vacancy records

    Separate record types with the fields needed to match one to the other: area, location, budget, move date, availability.

    Result: A new requirement can be set beside current stock.

  2. Stage definitions your team agrees

    Named stages for both pipelines, with a plain rule for moving a record forward.

    Result: Everyone reads a stage the same way.

  3. A lease-end calendar

    Each placed tenant's lease end date, with a reminder set ahead of it.

    Result: Renewals and relocations are called before the lease runs out.

  4. Source and outcome fields

    Where each requirement came from and how it ended: leased, lost, withdrawn.

    Result: Reports compare sources by leases, not by enquiries.

  5. Import of existing contacts

    Contacts from phones and sheets cleaned, de-duplicated and loaded with a note on their history.

    Result: Your existing network is in the system from the start.

How the result is measured

  • Enquiries logged in the CRM
  • Data completeness
  • Reports generated from CRM data

Recorded as a baseline before work starts, so every later report has an honest comparison.

Fields worth keeping

The requirement and vacancy fields a brokerage loses when they live in phones.

Requirement size, corridor and move date
Entered by whoever takes the call. The three fields let any broker in the team shortlist floors without phoning the colleague who took the enquiry.
Floor and ask basis for each vacancy
Filled from the owner's call and checked against the building. Dated, so a listing last confirmed long ago is marked as old.
Mandate type and the date it ends
Exclusive, joint or open, entered by the broker who agreed it. Prompts a call to the owner before the mandate lapses.
Lease end date of past clients
Taken from the signed lease, with the client's agreement to be contacted. Drives the renewal call that other brokers would otherwise get.
Who introduced whom, with the date and time
Recorded when a company is first put in touch with a building. Settles which broker made the introduction if two claim it.

Who it is for

This is written for these commercial property brokers.

  • Office space brokers in IT parks and central business districts
  • Retail and high-street shop brokers for brands and franchise owners
  • Warehouse and industrial shed brokers near logistics corridors
  • Coworking and managed office space brokers
  • Tenant representation firms acting only for the occupier
  • Brokers for pre-leased shop and office investment sales
  • Showroom brokers for car, furniture and electronics dealers
  • Boutique brokers working a single micro-market

Before you decide

When this may not be the right fit.

  • The team keeps the inventory in one person's phone and will not share it, which must be settled before a tool is bought.
  • You close a few deals a year and a sheet already holds them, so a CRM would add effort without clarity.
  • You would store owner documents in the tool without deciding who may see them.

Before you decide

Agree the work. Know how to judge it.

CRM for commercial property brokers: use these checks to prepare, choose the scope, and review what changes.

Bring the right evidence

List the records your team uses and show how an enquiry becomes an order today. Bring examples of duplicate entries, missing owners, and reports that require manual correction.

Make the scope clear

Agree the stages, required fields, access roles, and integrations before configuring the system. Separate software subscriptions from setup, data work, and training.

Check the work in use

Ask the people who will use the CRM to complete a real handover and find the next action without help. Check that the management report can be traced back to individual records.

Know when to change course

If the process is unclear, buying a more complex CRM adds more places for confusion. Start with the minimum fields and rules the team can use consistently.

These are discussion points, not a fixed package. GullySales confirms the deliverables, responsibilities, fee, and term in writing after reading your brief and speaking with you.

Before we start

What to have ready before the work starts.

The records, access and decisions this work needs from commercial property brokers. Anything missing is noted in the written scope, with who will supply it.

Your contact sheets in any format
Spreadsheets, phone exports and visiting-card lists are all fine, as long as they are in your hands. Duplicates are expected. If contacts live only on brokers' personal phones, collecting them is a first step, and we plan time for it. Send the files as they stand, because messy data shows us how your team really records things, and we clean only the entries you approve for import now.
A list of live requirements and vacancies
Write each open requirement and each vacancy you are working, with size, place and last contact. These are the first records loaded, so the tracker is useful from day one. Without them the tracker starts empty and brokers return to their notebooks. Include the date of the last contact and the broker handling it, so the first week in the tracker already shows who is waiting on whom.
Agreement on who owns which stage
Name the person responsible for each stage, such as qualifying, touring and negotiation. The tracker shows owners, and shared stages lead to dropped balls. If owners are unclear, we start with one owner per record and refine later. Where two brokers share a stage, name the person who settles a dispute, since a record with two owners is soon owned by neither, and the board then fills with idle cards.
The lease-end dates you already know
Collect the lease expiry and lock-in end dates of tenants you placed, even approximate ones. These drive repeat work and are the dates of greatest value in the tracker. If you hold none, we add a field and your team fills it from the next lease signed. Approximate dates are acceptable because the tracker is for prompts, and the broker confirms the date when they call the tenant.
Two brokers willing to test
Pick one senior and one junior broker to use the trial and say what fails. Their views decide what the team will accept. Without testers, we judge by our own use, and the team may reject the result at switch-over. Each should be asked to try three real cases, not made-up ones, and to report what slowed them, in their own words, once the trial ends. Their feedback is written down before we change anything.

How it works

How the CRM work runs

The work itself, in order. How an engagement starts, from your brief to a written scope, is set out on our method page.

  1. 1

    Draw the two journeys on one wall

    We sit with your brokers and sketch how a requirement travels from first call to signed lease, and how a vacancy travels from the owner's call to a mandate and a let floor. You correct us where reality differs. The two sketches become the stages, and stages your team does not recognise are removed. Stages the team does not recognise are removed from the board before any software is touched.

  2. 2

    Agree the fields a record must carry

    We list the facts a requirement or a vacancy needs, such as area, floors, budget band, move date, building, lease end and source. You cut the list until every field is one a broker will fill in. A short list that is used beats a long one that is not. Fields only a manager reads move to a separate sheet, because a broker at a tour will not fill a long form.

  3. 3

    Set up a trial with fifty old contacts

    We load a small set of your contacts into a test copy, with requirement and vacancy records, and let two brokers use it for a few real cases. You tell us what is awkward. Nothing touches your live contact list until the trial runs smoothly. The two brokers log every call for the trial, and we note each place where entry felt slow, confusing or duplicated by the notebook they already carry.

  4. 4

    Connect the forms, calls and the lease calendar

    We link the website forms, the missed-call alerts and your WhatsApp number to the tracker, and add the lease-end calendar. You check that a test enquiry lands in the right place with the source filled in. Rules that move a record between stages are tested at the same time. If a form arrives without a source, the rule marks it for a person to check instead of discarding it, so nothing vanishes silently.

  5. 5

    Import contacts and clean the duplicates

    We bring in your spreadsheet and phone contacts, merge repeats and mark each as owner, occupier or referrer. You decide which old entries to drop. Imports are run once, after you have seen a sample, and a copy of the original is kept. Where the same company appears under two spellings or two phone numbers, we show you both records and you choose the one to keep, with notes joined.

  6. 6

    Hand over and read the outcome fields

    On the day the team starts, we stay on hand for questions and fix what the team finds. Later we read the source and outcome fields against the record taken before the work began: requirements, visits, mandates and leases. You decide which stage definitions to change. Stages that nobody uses are merged, and a stage where records pile up is examined with the brokers themselves before any rule changes.

Where this fits

Three pieces of sales work, in this order.

This work sits inside sales management. A target, a review routine and someone who owns the number.

  1. Step 1

    Sales audit

    Find where deals are being lost and what to fix first.

    Start here if you cannot say where orders are lost.

  2. Step 2

    Sales process design

    One written way to sell, from first enquiry to repeat order.

    Start here if every salesperson sells differently.

  3. Step 3 · you are here

    Sales management

    A target, a review routine and someone who owns the number.

    Start here if the team has targets and no routine.

Tell us what you need Your brief is read before we call. Scope, fee and term in writing.

FAQ

Questions owners ask before they call.

Not here? More answers, or ask on WhatsApp.

Which CRM suits a small brokerage?
One your team will open daily. Common choices in India include Zoho CRM and HubSpot, and a well-built sheet serves a very small team. Choose by how easily your people enter a tour note.
Can the CRM store owner documents?
It can hold links to documents. Keep identity and ownership papers in a controlled folder and share only with consent. Professions and states set different advertising rules, so have your council or adviser look before anything is published.
How do I get the team to use it?
Make it the only place a shortlist can be requested from. If the sheet or chat is still the source of stock, people will keep using it.
Can the CRM store owner documents like title papers?
Keep only what you need to show a listing, such as a floor plan and an authority letter, and limit access to the team on that deal. Title and identity papers carry privacy duties, so store them in a controlled folder and check the rules with your adviser.
Can the CRM tell me which of my past tenants may be moving soon?
It can, if lease-end and lock-in dates are recorded, because the tracker lists tenants whose dates are approaching and prompts a call. It cannot guess dates you have not entered. We add the date fields, import what you know, and set a reminder that tells the broker who to call and why. A reminder list is then built from those fields, so the broker opens the tracker, sees the tenants whose lease or lock-in is approaching, and rings each with a reason to call. If dates are only approximate, the list still works as a prompt for a conversation rather than as a legal record.
What happens to the records of a broker who leaves?
The records stay with the firm, because the tracker belongs to you and not to the broker. We set ownership so that a departing broker's contacts can be reassigned in one step, with notes intact. This protects relationships built on your time. Ask your own adviser about any contractual points on client contacts. The firm decides in advance who may see and export contacts, and we set permissions to match. If a contract between the firm and the broker says anything about client relationships, the firm's own lawyer reads it, because that is a legal matter and not a software setting. We never advise on that point.
How much does it cost?
There is no price list, because the work differs by business. The fee is scoped after we have read your brief and spoken to you, and put in writing before anything starts, split into our time, your media spend and production.
How long is the contract?
The term is agreed in writing after we have spoken, along with the fee and the reporting. It is never a default twelve months, and renewal is decided on the numbers against the baseline recorded at the start.
How soon will we see results?
It depends on the trade, the channel and what is already in place. After we have read your brief and spoken to you, we say what we would expect to move first and how it will be measured against the baseline. Nothing here is guaranteed.
Who will actually do the work?
The person you speak to before anything starts. We work from one office in Nagarbhavi, Bengaluru, with no account managers in between.

Your next practical step

Tell us what you are trying to grow, and we will read it before we call.

Eight short steps, mostly taps. Skip anything you would rather answer on the call.