Skip to content
GullySales

Furniture designers · CRM

Keep every sketch, quote and advance in one list instead of in your head.

A CRM for a furniture designer is a single record of each enquiry and commission, from first message to delivery, with the next step against each. GullySales works on setting up a simple one that you will keep up at the bench, in a sheet or an ordinary tool.

Scope, fee, reporting and term are agreed in writing after we have read your brief and spoken to you.

Realistic editorial illustration of architecture firms at work in India

What CRM means

A CRM is the record where every enquiry, call and quote is kept against a customer, replacing separate notebooks, spreadsheets and memory. GullySales sets up or cleans an existing CRM and reports from it by enquiry outcome rather than by activity logged.

Last updated 14 Nov 2026.

For furniture designers

Where it usually goes wrong, and what we would do.

  • “A commission runs over a long stretch of time”

    Enquiry, sketch, revision, approval, advance, production, delivery and a later repeat order can run across a long stretch. Without a record, you reconstruct the state of each from old messages, and something drops. The CRM holds the stage and the next action for every job.

  • “Enquiries sit across several apps”

    A quote request arrives on Instagram, a size on WhatsApp, a budget in an email and a sketch in a folder. A record that gathers these for each client saves you from searching four places while the client waits.

  • “The sketch is the asset and needs a record”

    Who received which drawing, on what date, under what terms is the evidence if a design is copied. Logging each sent drawing against the enquiry creates a trail that costs nothing and can matter later.

  • “Specifiers are relationships, not leads”

    An interior designer who orders twice a year needs a different record from a one-time buyer: past schemes, preferred finishes, what they asked about and when they are likely to need something new. The CRM should hold that history.

What we do

What we deliver for furniture designers.

The work available for this need. We agree the deliverables and responsibilities for your engagement in writing.

  1. A simple pipeline for commissions

    Stages from enquiry to delivered, with a definition of each so everyone reads them the same way.

    Result: You can see every job and its stage at a glance.

  2. A contact record for each client and specifier

    Name, firm, source, pieces discussed, drawings sent, quotes, advances and notes.

    Result: Any conversation can begin where the last one ended.

  3. A drawing log

    A column recording which drawing went to whom and on what terms.

    Result: You hold a dated record of what you shared.

  4. Reminders for next steps

    A date and an action against every open enquiry, so none waits without an owner.

    Result: No quote sits unanswered because it was forgotten.

  5. A short report on the pipeline

    A plain reading of enquiries, quotes and orders by source and piece.

    Result: You can see where commissions come from and where they stall.

How the result is measured

  • Enquiries logged in the CRM
  • Data completeness
  • Reports generated from CRM data

Recorded as a baseline before work starts, so every later report has an honest comparison.

Fields worth keeping

Keep these fields so no sketch, quote or advance lives only in memory.

Stage of the commission
Enquiry, sketch, quote, advance, production or delivered. Set by you after each step, so every job shows where it stands.
Drawings sent, with date and terms
Filled when a drawing leaves the studio. A dated record is the evidence if a design is copied.
Piece, size and timber discussed
Entered from the quote form. Lets you quote a repeat client without asking again.
Specifier who introduced the client
Entered by you. Lets you thank the interior designer and see which specifiers bring orders.
Advance received and balance due
Entered by whoever takes payment. Keeps work from starting before the advance arrives.
Next action and its date
Entered after each contact. No quote waits without an owner.

Who it is for

This is written for these furniture designers.

  • Studio furniture designers selling commissions and limited editions
  • Designers who create ranges for a manufacturer on a royalty
  • Custom furniture designers for hotels, restaurants and offices
  • Bamboo, cane, reclaimed wood and metal furniture designers
  • Designers working with traditional craft clusters
  • Product design studios with a furniture line
  • Furniture designers who also do interior detailing
  • Young designers launching a first collection

Before you decide

When this may not be the right fit.

  • You handle a handful of commissions a year and track them well in a notebook, so a system would add typing and no insight.
  • No one will record the drawing sent, which is the entry that matters most.
  • Several people quote with no shared rule, so a pipeline would only show the confusion.

Before you decide

Agree the work. Know how to judge it.

CRM for furniture designers: use these checks to prepare, choose the scope, and review what changes.

Bring the right evidence

List the records your team uses and show how an enquiry becomes an order today. Bring examples of duplicate entries, missing owners, and reports that require manual correction.

Make the scope clear

Agree the stages, required fields, access roles, and integrations before configuring the system. Separate software subscriptions from setup, data work, and training.

Check the work in use

Ask the people who will use the CRM to complete a real handover and find the next action without help. Check that the management report can be traced back to individual records.

Know when to change course

If the process is unclear, buying a more complex CRM adds more places for confusion. Start with the minimum fields and rules the team can use consistently.

These are discussion points, not a fixed package. GullySales confirms the deliverables, responsibilities, fee, and term in writing after reading your brief and speaking with you.

Before we start

What to have ready before the work starts.

The records, access and decisions this work needs from furniture designers. Anything missing is noted in the written scope, with who will supply it.

Your present notebook, sheet or chat list
Bring whatever you use today to keep track of enquiries, however untidy: a diary, a sheet, saved WhatsApp chats. We read it to learn your habits. If nothing exists, we begin from the last few commissions you can recall, and the first load of data will have gaps.
Folders of sketches and drawings
Know where the drawings for each commission are kept, on a laptop, phone or cloud folder. The record will point to them by file name. If they are scattered, the drawing log starts with a tidy-up, and that takes your time before the list is useful.
One owner for the list
Name the person who will update the record after each call or message. It can be you. A list with no owner decays within a few commissions, and the reminders we set up would then point at old information.
A decision on the tool you will use
Say whether you prefer a plain spreadsheet, a free tool or something you already pay for. We advise but you choose. A tool the studio dislikes will be dropped, so without a decision we default to the simplest one that does the job.
Contacts exported from your phone
Export client and specifier names, numbers and any notes from your phone or email. A file is enough. Without it we type from memory and chats, and some of the people you want to stay in touch with may be left off the first version.

How it works

How the CRM work runs

The work itself, in order. How an engagement starts, from your brief to a written scope, is set out on our method page.

  1. 1

    Trace one commission from message to delivery

    We take a recent commission and follow it with you from the first message through sketches, quote, advance, making and delivery, writing down where each step was recorded: a notebook, a chat, an email. At the end there is a map of your real journey, with the places where information gets lost shown plainly.

  2. 2

    Agree the stages of a commission

    From that trace you and we fix a short set of stages, for instance enquiry, sketch sent, quote sent, advance received and in making. Each stage gets a clear sign that tells you a piece has moved on. You cut any stage you would never remember to update.

  3. 3

    Set up the sheet or tool and its fields

    We build the list in a spreadsheet or a simple tool that you already use, with a record for every client and specifier and a place for the drawing file name and the next step. You choose what you will actually fill in from the bench. Anything you would skip is removed.

  4. 4

    Load the open commissions and past clients

    We enter the commissions in progress and the older clients you wish to hear from again, working from your notebook, phone and chats. You check each one for mistakes and for names that should be merged. Afterwards the studio has one list with no commission living only in someone's memory.

  5. 5

    Run the studio on it with a real enquiry

    A new enquiry goes through the list from start to finish, with the person who answers the phone doing the entries. We watch what is awkward and change the stage names or fields. You decide whether this is something you will keep up or whether it needs to be simpler.

  6. 6

    Read the pipeline against the old notebook

    We compare what the list now shows, enquiries, quotes sent, advances received, with the counts from before. You tell us which commissions the old way would have lost. We then agree which reminders to keep, who owns the list and what to tidy.

Where this fits

Three pieces of sales work, in this order.

This work sits inside sales management. A target, a review routine and someone who owns the number.

  1. Step 1

    Sales audit

    Find where deals are being lost and what to fix first.

    Start here if you cannot say where orders are lost.

  2. Step 2

    Sales process design

    One written way to sell, from first enquiry to repeat order.

    Start here if every salesperson sells differently.

  3. Step 3 · you are here

    Sales management

    A target, a review routine and someone who owns the number.

    Start here if the team has targets and no routine.

Tell us what you need Your brief is read before we call. Scope, fee and term in writing.

FAQ

Questions owners ask before they call.

Not here? More answers, or ask on WhatsApp.

Do we need paid software?
Not at the start. A well-built sheet works for a small studio. Move to a proper tool when the volume or the number of people makes the sheet slow. GullySales sets up the structure first, whichever tool holds it.
Who should fill it in?
Whoever speaks to the client. If that is you, keep the fields few enough to complete in a minute after each call. A record kept up is worth more than a perfect one that is abandoned.
Can it link to WhatsApp and Instagram?
Certain tools connect to WhatsApp Business and others do not. Check what your tool supports and the platform's current rules. Even without a link, a note against each client with the main messages covers the need.
Can the CRM hold client drawings?
Keep the drawings in a filed folder and record in the CRM which file went to whom, on what date and under what terms. Large files make a record heavy, and the entry is what matters if a design is copied. Link to the folder rather than attaching every version.
Do we need to enter every message?
No. Record the moves that matter: an enquiry arrives, a sketch goes out, a quote is sent, an advance arrives, the piece ships. Everything else stays in your chat. A list that asks for every message will be abandoned on busy workshop days. We choose the fields with you so that updating the record takes a minute after a call, and the record stays accurate because it asks little.
Can our workshop manager see the list?
Yes, if you decide so, and you can limit what they see. A workshop manager needs the pieces in making, the sizes and the delivery dates, not the prices or the client's phone number. A sheet can be shared with limited access, or a second view can be created. We set up the access with you, and you hold the right to change who sees what whenever the team changes.
How much does it cost?
There is no price list, because the work differs by business. The fee is scoped after we have read your brief and spoken to you, and put in writing before anything starts, split into our time, your media spend and production.
How long is the contract?
The term is agreed in writing after we have spoken, along with the fee and the reporting. It is never a default twelve months, and renewal is decided on the numbers against the baseline recorded at the start.
How soon will we see results?
It depends on the trade, the channel and what is already in place. After we have read your brief and spoken to you, we say what we would expect to move first and how it will be measured against the baseline. Nothing here is guaranteed.
Who will actually do the work?
The person you speak to before anything starts. We work from one office in Nagarbhavi, Bengaluru, with no account managers in between.

Your next practical step

Tell us what you are trying to grow, and we will read it before we call.

Eight short steps, mostly taps. Skip anything you would rather answer on the call.