Skip to content
GullySales

Glass and glazing contractors · CRM

Keep every tender, quote and site visit in one record with a named owner.

A CRM for a glazing contractor is a single record of each buyer, tender and quotation, with the next step and the person responsible. GullySales works on the fields, the set-up and the habit of filling it in.

Scope, fee, reporting and term are agreed in writing after we have read your brief and spoken to you.

Realistic editorial illustration of turnkey construction companies at work in India

What CRM means

A CRM is the record where every enquiry, call and quote is kept against a customer, replacing separate notebooks, spreadsheets and memory. GullySales sets up or cleans an existing CRM and reports from it by enquiry outcome rather than by activity logged.

Last updated 14 Nov 2026.

For glass and glazing contractors

Where it usually goes wrong, and what we would do.

  • “A tender is a long conversation”

    A package passes through enquiry, drawings, pricing, clarifications, revised scope and negotiation. If each step lives in a different person's inbox, nobody can say where it stands.

  • “Small jobs and big packages need different tracks”

    A railing quote is settled in a few calls and a façade package takes a crowd of people. One list with both mixed makes the large package look slow and the small job look neglected.

  • “Site measurements and drawings belong to the record”

    The measurements taken on a visit and the drawing sent to the buyer decide the price. When they sit in a phone gallery, a second engineer cannot pick up the job.

  • “The record is only as good as the habit”

    A CRM no one opens becomes a list of old names. A small number of fields, filled at the end of each call, serve better than a form of thirty boxes.

What we do

What we deliver for glass and glazing contractors.

The work available for this need. We agree the deliverables and responsibilities for your engagement in writing.

  1. A pipeline set for glass work

    Stages for enquiry, site visit, quotation, negotiation, order and installation, with separate tracks for large packages.

    Result: Each live job sits in one stage with an owner.

  2. Fields chosen for your trade

    Kind of work, glass type, area, building, buyer role and source, and nothing more than you will fill.

    Result: The fields are the ones your team agreed to keep up.

  3. Quotes and drawings attached to the record

    Each quotation, measurement sheet and drawing stored against the buyer it belongs to.

    Result: A second person can open a job and see what was sent.

  4. Lost-order reasons

    A required note whenever a quote is lost, picked from a short list.

    Result: You can read why quotes are lost over the year.

  5. A short training for the team

    A hands-on session for the site engineers and the sales person on entering a call in under a minute.

    Result: Everyone on the team has entered a live call in the system.

How the result is measured

  • Enquiries logged in the CRM
  • Data completeness
  • Reports generated from CRM data

Recorded as a baseline before work starts, so every later report has an honest comparison.

Fields worth keeping

Keep the fields a glass quotation actually depends on.

Kind of work and size
Filled by the estimator at the first call, so a railing and a curtain wall sit on separate tracks with the right senior person on each.
Role of the contact
Set by whoever takes the call, so a consultant, a purchase manager and a homeowner each get the reply that suits them.
Site measurement and drawing version
Uploaded by the engineer after the visit, so a second person can pick up the job and the quote matches the latest drawing.
Quote sent and next step date
Set by the sales owner when the quote goes out, so the follow-up call has a reason and a day.
Reason for loss
Written by the owner when an order goes elsewhere, which lets you see whether price, scope or timing is losing glass work.

Who it is for

This is written for these glass and glazing contractors.

  • Curtain wall and structural glazing contractors
  • Glass railing and balustrade contractors
  • Frameless glass door, partition and shower enclosure installers
  • Skylight and glass roof contractors
  • Shopfront and showroom glazing specialists
  • Double glazed and acoustic glass window installers
  • Glass processors who also install, with their own toughening and lamination
  • Sub-contractors who fit glass supplied by the main façade contractor

Before you decide

When this may not be the right fit.

  • No one will open the record after each call, so the fields would stay empty.
  • All enquiries still arrive on personal phones with no business number, so there is nothing to feed the CRM.
  • You want a thirty-field form on day one, which the team would skip.

Before you decide

Agree the work. Know how to judge it.

CRM for glazing contractors: use these checks to prepare, choose the scope, and review what changes.

Bring the right evidence

List the records your team uses and show how an enquiry becomes an order today. Bring examples of duplicate entries, missing owners, and reports that require manual correction.

Make the scope clear

Agree the stages, required fields, access roles, and integrations before configuring the system. Separate software subscriptions from setup, data work, and training.

Check the work in use

Ask the people who will use the CRM to complete a real handover and find the next action without help. Check that the management report can be traced back to individual records.

Know when to change course

If the process is unclear, buying a more complex CRM adds more places for confusion. Start with the minimum fields and rules the team can use consistently.

These are discussion points, not a fixed package. GullySales confirms the deliverables, responsibilities, fee, and term in writing after reading your brief and speaking with you.

Before we start

What to have ready before the work starts.

The records, access and decisions this work needs from glass and glazing contractors. Anything missing is noted in the written scope, with who will supply it.

Your present enquiry and tender sheets
Share whatever you use now: sheets, notebooks, mail folders. They are copied into the system. If they are scattered across phones, we spend the first sessions collecting them. Include the shared inbox or the personal phones where enquiries arrive, because a tender that came as a forwarded message must be found and entered.
A sample quotation and its drawing
Send one recent quotation and the drawing it priced, with prices removed. They show the fields that matter. Without a sample, the fields are guessed and may leave out the detail your estimator needs. Choose a sample where the first drawing and the final one differ, so we can see how revisions are named and which version the quote used.
A decision on who sees prices and margins
Decide who may see quotation prices and margins. Only the owner can. With no rule, either the engineers see everything or the estimator sees nothing, and the system is worked around. Write also the cases where a consultant or a purchase manager should see only the status of their own job, if you plan to give them access.
Time from engineers for one training
The engineers and supervisors who visit sites need a session with us. They enter measurements on site, so their habit decides whether the record is complete. If they cannot attend, the record is filled by one person later from memory. Name the days of the week when site visits cluster, since the training must fit around them, and the supervisors who enter measurements on a phone.
A list of lost orders with reasons
Write the orders you lost in recent months and the reason, as far as you know. Where unknown, say so. This seeds the lost-order list and shows what the fields must capture. Even a short note such as price, schedule, or choice of another glass supplier is acceptable, and we group them into a reason list in the system.

How it works

How the CRM work runs

The work itself, in order. How an engagement starts, from your brief to a written scope, is set out on our method page.

  1. 1

    Follow one tender and one railing job through

    We take one package tender and one small railing job and trace each from first call to handover, writing down every person who touched it and every document it generated. You walk us through the files. The two paths show where a single pipeline would fail and where the tracks must separate.

  2. 2

    Set two tracks and the stages on each

    We draw one track for tenders and larger packages and one for small jobs, with stages in your words: enquiry, site visit, drawing, quote, negotiation, order. You decide the order and what closes a stage. The tracks are set up so that a tender is not lost among railings. We set the tender track to carry the consultant, the main contractor and the deadline for each submission.

  3. 3

    Choose the fields the quote needs

    We list the fields for glass work: type, area or lengths, glass and system, finish, floor and access, site date, consultant, contractor. You cut the fields your estimator will not fill. Short forms are filled, long forms are left blank.

  4. 4

    Attach drawings and measurements to records

    We set up how a drawing, a site photograph and a measurement sheet are attached to a record, with names that the estimator will recognise. You decide who can see prices. Revised drawings are saved as new versions, so the quote can be traced to the drawing it was based on.

  5. 5

    Load live enquiries and practise on them

    We enter current enquiries and tenders, and your estimator and engineers move them through the stages in a short session. You note the steps that feel heavy. We simplify before the system is used for real.

  6. 6

    Train the team, then read the lost reasons

    After a short training for engineers and supervisors, the old sheets are retired. After some orders have passed through, we read the lost-order reasons recorded and compare them with the reasons you believed at the start. You see what the firm now knows about its quotations. We also check that the engineers are entering measurements on site rather than recalling them at the desk later in the day.

Where this fits

Three pieces of sales work, in this order.

This work sits inside sales management. A target, a review routine and someone who owns the number.

  1. Step 1

    Sales audit

    Find where deals are being lost and what to fix first.

    Start here if you cannot say where orders are lost.

  2. Step 2

    Sales process design

    One written way to sell, from first enquiry to repeat order.

    Start here if every salesperson sells differently.

  3. Step 3 · you are here

    Sales management

    A target, a review routine and someone who owns the number.

    Start here if the team has targets and no routine.

Tell us what you need Your brief is read before we call. Scope, fee and term in writing.

FAQ

Questions owners ask before they call.

Not here? More answers, or ask on WhatsApp.

Which CRM do you recommend for a glazing firm?
One your team will open every working day. Choices in use in India include Zoho CRM, HubSpot and a well-built sheet. The right one depends on the size of the team, not on its feature list.
Can the CRM hold our tender documents?
It can link to them or store copies against the right buyer. Large drawing sets are better kept in a shared folder and linked from the record.
How do we get engineers to fill the CRM?
Keep the fields few and put them where engineers already work, such as the site visit report. Ask only for what the next person needs. When the team sees a lost quote traced back to a missing note, they fill the record without being chased.
Should tenders and small jobs share one pipeline?
No. A railing quote closes in a few calls and a façade package goes through drawings, clarifications and revised scope. Two tracks with their own stages keep the large package from looking slow and the small job from being ignored.
Do small jobs need the same records as tenders?
No. A railing job needs a short record: contact, measurements, photograph, quote and date. A tender needs documents, deadlines and the consultant. We set two tracks so a small job is entered in a short sitting and a tender gets the longer form. Both land in one list so the owner sees everything.
Can the system send the quotation itself?
It can attach and send a quotation, but we advise that the estimator reviews every quote before it goes. A glass quote depends on measurements and site conditions that a template does not know. We set the system to prepare the document and remind the estimator, and a person sends it.
How much does it cost?
There is no price list, because the work differs by business. The fee is scoped after we have read your brief and spoken to you, and put in writing before anything starts, split into our time, your media spend and production.
How long is the contract?
The term is agreed in writing after we have spoken, along with the fee and the reporting. It is never a default twelve months, and renewal is decided on the numbers against the baseline recorded at the start.
How soon will we see results?
It depends on the trade, the channel and what is already in place. After we have read your brief and spoken to you, we say what we would expect to move first and how it will be measured against the baseline. Nothing here is guaranteed.
Who will actually do the work?
The person you speak to before anything starts. We work from one office in Nagarbhavi, Bengaluru, with no account managers in between.

Your next practical step

Tell us what you are trying to grow, and we will read it before we call.

Eight short steps, mostly taps. Skip anything you would rather answer on the call.