Skip to content
GullySales

HVAC contractors · Lead generation

Get the bill of quantities sent to you before the ducting package is priced.

Lead generation for an HVAC contractor means getting onto the lists of the people who release packages: MEP consultants, builders' purchase teams and plant owners. It is a different job from collecting calls for AC repair. GullySales works on who should know your firm, what they are shown and how each enquiry is logged.

Scope, fee, reporting and term are agreed in writing after we have read your brief and spoken to you.

Realistic editorial illustration of hvac companies at work in India

What lead generation means

Lead generation is the combined work of every channel that brings in a new enquiry, whether from search, adverts, referrals or a stall at an exhibition. GullySales runs these channels together and reports the number of enquiries each one produced, not the activity behind it.

Plan the next part of the work

Last updated 21 Nov 2026.

For HVAC contractors

Where it usually goes wrong, and what we would do.

  • “The lead is a package, not a caller”

    A hospital wing, a cold room or a tower's chiller plant is released as a package with a bill of quantities. The firm that receives it was chosen weeks earlier. A lead for you is a named consultant or purchase head who has your systems list.

  • “Consultants shortlist from sites they have seen”

    An MEP consultant remembers the contractor whose VRF job they walked through. Introductions that offer a visit to a finished site carry more weight than a brochure, because the consultant is judging commissioning, not a catalogue.

  • “An enquiry from a factory names a room, not a product”

    A pharma or cold storage engineer writes about temperature, filtration and area. If your enquiry route asks for those details, the first conversation is about their room instead of a rate per tonne.

  • “Unlogged enquiries are lost leads”

    A floor plan on WhatsApp, a call from a builder's site and a tender notice all arrive in different places. Without one list showing source, building type and owner, nobody knows which route brought the last order.

What we do

What we deliver for HVAC contractors.

The work available for this need. We agree the deliverables and responsibilities for your engagement in writing.

  1. A target list of consultants and builders

    Consultancies, builders and plant owners in your region, grouped by the kind of building they design or run, each with a named contact where one can be found.

    Result: The list shows each name and whether it has been introduced, replied or visited a site.

  2. A reference-site offer

    A one-page invitation to see a finished installation, written for the engineer who will judge the work, with the site owner's consent noted.

    Result: A consultant can say yes to a visit by replying to one message.

  3. An enquiry form for project buyers

    A form asking building use, area, system type and where the project stands, kept apart from the residential service form.

    Result: Each enquiry arrives with the details your engineer needs for a first answer.

  4. A source field on every enquiry

    Each lead is tagged with where it came from: consultant, builder, search, tender notice, equipment brand or repeat client.

    Result: You can read which route brought each order you won.

  5. A tender and notice watch

    A routine for checking public and private tender notices in your regions and logging the ones that match your systems.

    Result: Matching notices are listed with a decision to bid or pass.

How the result is measured

  • Relevant enquiries by source
  • Duplicate and unsuitable enquiries
  • Time to the first response
  • Accepted enquiries reaching an agreed next step

Recorded as a baseline before work starts, so every later report has an honest comparison.

What to capture or send

The details that turn a floor plan into a priced HVAC package.

Drawing or floor plan with area
Ask for the layout before any rate. A tonnage estimate from a photograph of a room will be wrong, and the consultant notices.
Building type and use
Office, hospital theatre, pharma clean room or cold room. It decides the system, the filtration and the testing, and which of your people takes the enquiry.
Who issued it: consultant, builder or owner
Note the name and firm. A package from an MEP consultant follows a bill of quantities, while an owner wants a layout and a figure.
Brand and make specified
If the consultant has named equipment, record it. You can only price what is specified and propose an approved equal where permitted.
Submission date and site access
Capture the last date for the offer and when the site can be visited. A late offer is not read, so this field drives the order of work.

Who it is for

This is written for these HVAC contractors.

  • Ducting and air distribution contractors
  • Chiller plant and central AC contractors
  • VRF and VRV system installers
  • Clean room and pharma HVAC contractors
  • Cold room and temperature-controlled storage contractors
  • Ventilation and exhaust contractors for factories and basements
  • Hospital and operation theatre HVAC specialists
  • Testing, adjusting and balancing firms working with contractors

Before you decide

When this may not be the right fit.

  • Your estimating engineer is booked on current offers and cannot price another package, so more enquiries would go unanswered.
  • You have no completed project to show a consultant, so the first need is a reference site before a source list will help.
  • You cannot tell a repair enquiry from a project package at the first call, so the sorting step is the job to fix before generating leads.

Before you decide

Agree the work. Know how to judge it.

Lead generation for HVAC contractors: use these checks to prepare, choose the scope, and review what changes.

Bring the right evidence

Define the organisations or buyers you can serve and the reasons they would consider a conversation. Bring examples of accepted and rejected prospects so the selection rule is visible.

Make the scope clear

Agree the research sources, contact approach, qualification rules, and handover. Clarify which meetings count as accepted and what happens to replies that are not ready to buy.

Check the work in use

Review why a prospect was selected and what was learned from the response. Count held, relevant conversations separately from contacts found, messages sent, or meetings booked.

Know when to change course

If the same objection appears repeatedly, adjust the offer or buyer group before increasing outreach. Respect a request to stop contact and keep the exclusion in the record.

These are discussion points, not a fixed package. GullySales confirms the deliverables, responsibilities, fee, and term in writing after reading your brief and speaking with you.

Before we start

What to have ready before the work starts.

The records, access and decisions this work needs from HVAC contractors. Anything missing is noted in the written scope, with who will supply it.

The offer register or folder of past quotations
Every priced offer from the last two years, with the client, the date, the system and the outcome if known. A folder of files named by project is acceptable. Without it, we cannot tell which buyers release packages to you, and the target list is built on guesses.
A list of completed sites open to visits
Names of installations, the client's permission to show them and the person on site who can host. Choose sites with clean commissioning. If none can be shown, the reference offer waits and we use photographs and drawings instead.
Your estimator's time for the enquiry form
The person who prices offers must read the form questions and say what they truly need to start. This takes a sitting. If the estimator is not available, the form asks too much or too little, and project buyers drop out.
Access to the email that receives enquiries
We need to see where enquiries land today, whether one inbox or several engineers' phones. Read access to a shared inbox is enough. When enquiries sit on personal phones, the source field cannot be filled and half the leads vanish from the record.

How it works

How the lead generation work runs

The work itself, in order. How an engagement starts, from your brief to a written scope, is set out on our method page.

  1. 1

    Open the register of offers you sent

    We start with your offer register, or the folder of priced offers if there is no register, and mark which came from a consultant's tender, a builder's purchase team, a plant owner or a walk-in. You tell us which ones became orders. This shows who actually releases packages to you, and it is the baseline that every later source is read against.

  2. 2

    Build the list of consultants and builders

    From the register and your engineers' memory, we write the names of the MEP consultants, builders and plant owners who have asked you for a price or who release similar packages nearby. Your engineers mark the ones they have met. The list is short on purpose, and each name carries the last project seen and who knows them.

  3. 3

    Choose which finished sites can be visited

    Consultants shortlist from systems they have seen finish. You decide which completed installations a consultant or purchase head may be taken to, with the client's permission, and who from your side will walk them round. A site that was commissioned cleanly and has a willing facility engineer is worth more than a large one with disputes.

  4. 4

    Write the project enquiry form with your estimator

    We draft the form so a buyer can name a room, a plant need or a drawing, not a product. Your estimator reads every question and removes any that cannot change the offer. The form carries a source field, and a dummy enquiry is sent through it to confirm it reaches the estimator with the drawing attached.

  5. 5

    Read sources against orders won

    After the list is worked and the watch on tenders and notices runs, we compare sources with the baseline: enquiries by source, offers sent and orders won. A tender chased without a win is judged on that. You decide which consultants and which kinds of notice deserve more of your engineers' time, with no volume of leads promised.

Where this fits

Three pieces of sales work, in this order.

This work sits inside sales process design, at stage 1, prospecting and lead generation. The audit comes before it, and sales management keeps it running.

  1. Step 1

    Sales audit

    Find where deals are being lost and what to fix first.

    Start here if you cannot say where orders are lost.

  2. Step 2 · you are here

    Sales process design

    One written way to sell, from first enquiry to repeat order.

    Start here if every salesperson sells differently.

  3. Step 3

    Sales management

    A target, a review routine and someone who owns the number.

    Start here if the team has targets and no routine.

Tell us what you need Your brief is read before we call. Scope, fee and term in writing.

FAQ

Questions owners ask before they call.

Not here? More answers, or ask on WhatsApp.

Should we chase every tender we find?
No. List the ones that match systems you have installed and decide on those. A narrow set priced carefully tells you more than a long list priced in a hurry, though no route promises an order.
Do home AC enquiries belong in the same list?
Keep them in a separate list. A home repair and a hospital package need different replies, different people and different follow-up, and mixing them hides the project leads.
Who in the builder's team should we approach?
Start with the MEP head and the purchase head. Their names appear on tender documents or at site offices. Confirm each contact before adding it to your list.
Can a site visit be offered before the drawings arrive?
Yes, when the buyer is an owner and no consultant is involved. A visit lets your engineer see ceiling height, shaft space and power. For a consultant's package the bill of quantities already sets the scope, so a visit is needed only where the drawing leaves something open.
Should we take the home AC enquiries that come through the same number?
Keep them, but record them apart. A home enquiry is a small, quick job with its own price and crew, and mixing it with project packages makes the register unreadable. We add a type field at the first call, so the estimator sees at once which enquiries need drawings and which need a visit. Whether you serve homes at all is your decision.
How do we find tenders without paying for a list?
Start with public notices that your own sector publishes, the boards of builders you already know, and the consultants who invite you to price. We set a simple watch on the sources you choose and record every notice in the register. Check each platform's current rules on registration. Paid lists are optional, and we would test one before buying a longer term.
How much does it cost?
There is no price list, because the work differs by business. The fee is scoped after we have read your brief and spoken to you, and put in writing before anything starts, split into our time, your media spend and production.
How long is the contract?
The term is agreed in writing after we have spoken, along with the fee and the reporting. It is never a default twelve months, and renewal is decided on the numbers against the baseline recorded at the start.
How soon will we see results?
It depends on the trade, the channel and what is already in place. After we have read your brief and spoken to you, we say what we would expect to move first and how it will be measured against the baseline. Nothing here is guaranteed.
Who will actually do the work?
The person you speak to before anything starts. We work from one office in Nagarbhavi, Bengaluru, with no account managers in between.

Your next practical step

Tell us what you are trying to grow, and we will read it before we call.

Eight short steps, mostly taps. Skip anything you would rather answer on the call.