Skip to content
GullySales

Land brokers · CRM

Keep a record of who saw which plot and what they said before you call again.

A CRM for a land broker is one record that links each buyer, owner and plot with the visits made, the documents shared and the next call due. GullySales works on setting up fields, stages and reminders to suit land, not houses or flats.

Scope, fee, reporting and term are agreed in writing after we have read your brief and spoken to you.

Realistic editorial illustration of property management companies at work in the United States

What CRM means

A CRM is the record where every enquiry, call and quote is kept against a customer, replacing separate notebooks, spreadsheets and memory. GullySales sets up or cleans an existing CRM and reports from it by enquiry outcome rather than by activity logged.

Last updated 14 Nov 2026.

For land brokers

Where it usually goes wrong, and what we would do.

  • “A buyer and a plot are a pair, not a contact”

    One buyer sees three plots in two areas. A sheet of names cannot show which plot got a yes, which got a frown about the road and which is waiting on an owner. The record has to link people to plots.

  • “Owners belong in the system”

    The mandate, the price the owner expects, who else holds the land and when the mandate ends sit on the owner's record. Without them you show a plot another broker has already sold.

  • “Site visits produce the notes that win the next call”

    After a day of visits, what the buyer said about the slope or the neighbours is gone from memory by evening. A note typed in the car that day makes the next call specific.

  • “Documents get shared and nobody notes it”

    The buyer asked for the extract and the sketch, and they went out from a shop phone. Log what was sent and to whom, so the story is the same on every call.

What we do

What we deliver for land brokers.

The work available for this need. We agree the deliverables and responsibilities for your engagement in writing.

  1. Fields for land

    Plot or survey number, extent, road width, the approval status the owner states and the state of the mandate.

    Result: Any plot can be read out the same way by anyone in the office.

  2. Separate stages for buyers and owners

    One path from enquiry to sale for a buyer and another from first meeting to mandate for an owner.

    Result: You see where buyers and owners are stuck, apart.

  3. A visit log linking buyer to plot

    Who saw which plot, what they said and the next step agreed.

    Result: The next call refers to what the buyer said.

  4. A document log

    What was sent, to whom and when.

    Result: No buyer is sent the same paper twice or told something different.

  5. Reminders for the next call

    Each open buyer and owner shows who calls next and about what.

    Result: No open buyer is left without a named caller.

  6. Reports by area and source

    Enquiries, visits and sales set against the area and where the buyer came from.

    Result: You see which area and source sold plots. Zoho CRM or a shared sheet serves, whichever you will open.

How the result is measured

  • Enquiries logged in the CRM
  • Data completeness
  • Reports generated from CRM data

Recorded as a baseline before work starts, so every later report has an honest comparison.

Fields worth keeping

Record who saw which plot and what they said about it.

Plot shown and date of visit
Entered by whoever took the visit, so the next call can refer to the plot and what the buyer remarked on.
Buyer's objection in their words
Price, papers, distance or family. Written after the visit, it decides the next message more than any template.
Papers sent and papers asked for
Logged by the broker, so a buyer is not sent the same file twice and a pending request is not forgotten.
Owner and mandate status
Whether you hold a written mandate, filled by the broker, so you do not show a plot another broker has locked.
Family member who decides
Name and role, so the follow-up can include the person who has not yet seen the plot.

Who it is for

This is written for these land brokers.

  • Brokers for residential plots in approved layouts
  • Agricultural land and farmland brokers
  • Farmhouse and weekend plot brokers near cities
  • Industrial land brokers near industrial areas and highways
  • Brokers sourcing land for builders on joint development
  • Brokers selling to NRIs and investors in another city
  • Brokers dealing in sites inside a municipal limit
  • Village and taluk brokers connecting local owners with city buyers

Before you decide

When this may not be the right fit.

  • You show only a few plots a month, and a notebook already tells you who saw what.
  • Nobody is responsible for updating the record after a site visit, so it would be wrong by the weekend.
  • You hold owners' personal papers and have no way to keep them private, so a shared system would widen the risk.

Before you decide

Agree the work. Know how to judge it.

CRM for land brokers: use these checks to prepare, choose the scope, and review what changes.

Bring the right evidence

List the records your team uses and show how an enquiry becomes an order today. Bring examples of duplicate entries, missing owners, and reports that require manual correction.

Make the scope clear

Agree the stages, required fields, access roles, and integrations before configuring the system. Separate software subscriptions from setup, data work, and training.

Check the work in use

Ask the people who will use the CRM to complete a real handover and find the next action without help. Check that the management report can be traced back to individual records.

Know when to change course

If the process is unclear, buying a more complex CRM adds more places for confusion. Start with the minimum fields and rules the team can use consistently.

These are discussion points, not a fixed package. GullySales confirms the deliverables, responsibilities, fee, and term in writing after reading your brief and speaking with you.

Before we start

What to have ready before the work starts.

The records, access and decisions this work needs from land brokers. Anything missing is noted in the written scope, with who will supply it.

Your plot list in one place
Collect the plots you hold, with area, land type and owner, from wherever they are written. A messy list is acceptable. If the list stays scattered, the record starts with gaps and the first buyer matches will miss land you do have.
Buyers from your notebook or phone
Bring the buyers you have spoken to, with number and the plots they were told about. Messaging history will do. Without it, the record starts empty and your past work does not help the next call.
The papers you share before a visit
List the documents you hand over, so the document log matches what you do. We never mark a paper as verified. If you do not keep track now, the log begins from the day of switch. Keep a note of which papers were only shown at the visit and which were given as copies, since the log records both.
A decision on who may see owner details
Decide who in your office or family can open an owner's name and number. Owners trust you with this. If you do not decide, only you have access, which is safe but slow.
A phone that can run the record
You need a smartphone with a data connection on site. If coverage is poor on the land, tell us, and we set the record to save entries and sync later. Without this, visit notes wait until you return to a signal.

How it works

How the CRM work runs

The work itself, in order. How an engagement starts, from your brief to a written scope, is set out on our method page.

  1. 1

    Map a buyer, a plot and a visit

    We start by drawing, with you, how one real sale ran: the first call, the document shared, the site visit, the family discussion, the close. You tell us where the notes were lost. The result is a short journey that names the stages for buyers and, separately, for owners.

  2. 2

    Set up fields for land, not houses

    We build the record with fields that land needs: area, land type, extent, road access, the owner and the papers shared. You approve each field, and we remove any you will not fill. A field that is empty teaches the whole office to skip the others.

  3. 3

    Load your plots and your last buyers

    We load the plots you hold and the buyers from your notebook or spreadsheet into a test copy. You check that each buyer is linked to the plots they saw. Errors found now cost little, and they show where your old records disagreed with each other. Duplicate buyers, who appear under two numbers, are merged only after you confirm they are the same person.

  4. 4

    Connect forms, calls and chats

    We connect the enquiry form, the missed-call number and the chat account, so that a new enquiry creates a record without anyone typing it. We test with a real enquiry on each. You decide who is told when a new one arrives.

  5. 5

    Try it for a week of real work

    You and anyone who helps you use the test copy on live enquiries and note what is slow or missing. A record you can update from a car on a site road is a record you will actually use. We simplify what got in the way.

  6. 6

    Switch over and read the first reports

    From the switch day, the notebook stops and the record is the only place a visit is written. We read the first reports by area and by source against the figures recorded before, and you decide what to change. The reports show what was entered and promise no sales.

Where this fits

Three pieces of sales work, in this order.

This work sits inside sales management. A target, a review routine and someone who owns the number.

  1. Step 1

    Sales audit

    Find where deals are being lost and what to fix first.

    Start here if you cannot say where orders are lost.

  2. Step 2

    Sales process design

    One written way to sell, from first enquiry to repeat order.

    Start here if every salesperson sells differently.

  3. Step 3 · you are here

    Sales management

    A target, a review routine and someone who owns the number.

    Start here if the team has targets and no routine.

Tell us what you need Your brief is read before we call. Scope, fee and term in writing.

FAQ

Questions owners ask before they call.

Not here? More answers, or ask on WhatsApp.

Is a spreadsheet enough?
For a small office, a well-built sheet with a row per enquiry and a column per plot works and costs nothing. Move to a CRM when two people need to update the same record or yesterday's notes cannot be found.
Who should update it?
The person who made the call or took the visit, on the same day. A record written by someone else from memory is wrong by the time it is read.
Is it safe to hold owner details in it?
Limit owner and buyer details to the people who need them, give each person a login and remove access when someone leaves. Take advice on the privacy rules that apply to you.
Is it safe to hold owner details in a CRM?
Hold only what you need, limit access to people who deal with that owner, and keep scans of title papers out of casual chats. Owners trust you with documents, so decide who can open them before you store anything, and check the rules on personal data with your adviser.
Can the CRM remind me of a site visit?
Yes, each visit is a record linked to a buyer and a plot, and a reminder is set for the day before so you can confirm the time and the route. You can also set a reminder for the call after the visit. Reminders are sent to your phone or to the helper you name. We test that they arrive when you can act on them, not in the middle of a visit.
Can buyers and owners sit in the same record?
They sit in the same system but in separate stages, because a buyer and an owner want different things. An owner may also be a buyer elsewhere, and the system can link the two. The owner stages track the agreement to sell, the visits shown and the updates sent. Keeping both in one place lets you match a buyer to a plot without searching a notebook.
How much does it cost?
There is no price list, because the work differs by business. The fee is scoped after we have read your brief and spoken to you, and put in writing before anything starts, split into our time, your media spend and production.
How long is the contract?
The term is agreed in writing after we have spoken, along with the fee and the reporting. It is never a default twelve months, and renewal is decided on the numbers against the baseline recorded at the start.
How soon will we see results?
It depends on the trade, the channel and what is already in place. After we have read your brief and spoken to you, we say what we would expect to move first and how it will be measured against the baseline. Nothing here is guaranteed.
Who will actually do the work?
The person you speak to before anything starts. We work from one office in Nagarbhavi, Bengaluru, with no account managers in between.

Your next practical step

Tell us what you are trying to grow, and we will read it before we call.

Eight short steps, mostly taps. Skip anything you would rather answer on the call.