Skip to content
GullySales

Mixed-use property developers · Lead generation

Fill the site with the right enquiries for flats, offices and shops, each routed to its own desk.

Lead generation for a mixed-use developer means attracting separate enquiries for homes, office floors and retail units from one development, and keeping them apart. GullySales works on a source and a form for each use, so a flat buyer and a franchise owner never land in the same queue.

Scope, fee, reporting and term are agreed in writing after we have read your brief and spoken to you.

Realistic editorial illustration of real estate developers and brokers at work in India

What lead generation means

Lead generation is the combined work of every channel that brings in a new enquiry, whether from search, adverts, referrals or a stall at an exhibition. GullySales runs these channels together and reports the number of enquiries each one produced, not the activity behind it.

Plan the next part of the work

Last updated 21 Nov 2026.

For mixed-use property developers

Where it usually goes wrong, and what we would do.

  • “A flat buyer and a retailer are different leads”

    The flat buyer searches by locality, budget and possession. The retail brand's expansion head searches by frontage, footfall and neighbouring tenants. One enquiry form for both produces vague messages that nobody can qualify, so each use needs its own entry point and its own questions.

  • “Brokers bring commercial leads, portals bring homes”

    Home enquiries arrive through property portals, search and social advertising. Office and retail interest arrives through leasing brokers and direct approaches to chains. Spending evenly across all of these funds the channel that does not fit the unit being sold.

  • “Investors sit between the two”

    Some buyers want a shop or an office floor as an asset and care about the rental yield, the anchor and the tenant mix. They ask for lease terms before price. Treating them as home buyers loses them in the first call.

  • “A lead with no use recorded cannot be followed”

    When the sales gallery logs a visit as just a visitor, nobody knows whether to send a payment plan or a leasing sheet. The use being asked about is the first field, not an afterthought.

What we do

What we deliver for mixed-use property developers.

The work available for this need. We agree the deliverables and responsibilities for your engagement in writing.

  1. Entry point for each use

    A separate page and enquiry form for homes, offices, retail and any hotel or serviced block, each asking the questions that use needs.

    Result: Every enquiry arrives already labelled with the use.

  2. Source map by use

    A written list of which channel feeds which use: portals and search for homes, brokers and LinkedIn for offices, direct outreach for retail brands.

    Result: You can see which channel pays for which unit type.

  3. Qualifying questions

    Short questions for each buyer type, such as budget and possession for a home, area and fit-out needs for an office, frontage and trade for a shop.

    Result: The sales team knows who is worth a site visit.

  4. Broker and consultant enquiry route

    A separate form and pack for leasing brokers and retail consultants, so their enquiries do not mix with home buyers.

    Result: Broker enquiries are handled by the commercial desk.

  5. Lead report by use

    A report that lists enquiries, visits and signings for each use against your own earlier record.

    Result: The owner sees which use is slow before the next launch.

How the result is measured

  • Relevant enquiries by source
  • Duplicate and unsuitable enquiries
  • Time to the first response
  • Accepted enquiries reaching an agreed next step

Recorded as a baseline before work starts, so every later report has an honest comparison.

What to capture or send

Record the use first, then what that buyer needs next.

Use asked about
Flat, office floor, shop or hotel space. This field decides which desk takes the enquiry and which pack goes back, so make it a required choice on the form.
Unit size or frontage
A buyer's bedroom count and a retailer's frontage in feet are different questions. Capture the one that fits the use so nobody has to call back to ask.
Buying or leasing
An investor buying a shop and a brand renting it need different documents. Note which, so the right terms sheet goes out first.
Who is enquiring
Family, company, franchise owner or broker. A broker enquiry is tagged at entry so it never gets mistaken for a direct buyer.
Where they saw the project
Hoarding, portal, search, broker or an anchor tenant's announcement. Record it so you can see which route brings serious interest for which use.
Pack sent
Residential brochure, leasing deck or retail pack, with the date. The next executive can see what the buyer already holds before calling.

Who it is for

This is written for these mixed-use property developers.

  • Home buyers in the residential tower
  • Office occupiers and corporate real estate heads
  • Retail chains and franchise owners
  • Anchor tenants such as supermarkets and cinemas
  • Hotel and serviced apartment operators
  • Clinics, banks and service outlets
  • Commercial brokers and retail consultants
  • Investors buying shops and offices

Before you decide

When this may not be the right fit.

  • You have one sales team that cannot split flat and commercial enquiries, so separate forms would only send everything to the same overloaded desk.
  • The unit mix and the commercial floor plan are still changing, so any pack sent now would be out of date before the buyer reads it.
  • Nobody owns brokers' enquiries yet, so more routes in would create duplicates and arguments over who found the buyer.

Before you decide

Agree the work. Know how to judge it.

Lead generation for mixed-use developers: use these checks to prepare, choose the scope, and review what changes.

Bring the right evidence

Define the organisations or buyers you can serve and the reasons they would consider a conversation. Bring examples of accepted and rejected prospects so the selection rule is visible.

Make the scope clear

Agree the research sources, contact approach, qualification rules, and handover. Clarify which meetings count as accepted and what happens to replies that are not ready to buy.

Check the work in use

Review why a prospect was selected and what was learned from the response. Count held, relevant conversations separately from contacts found, messages sent, or meetings booked.

Know when to change course

If the same objection appears repeatedly, adjust the offer or buyer group before increasing outreach. Respect a request to stop contact and keep the exclusion in the record.

These are discussion points, not a fixed package. GullySales confirms the deliverables, responsibilities, fee, and term in writing after reading your brief and speaking with you.

Before we start

What to have ready before the work starts.

The records, access and decisions this work needs from mixed-use property developers. Anything missing is noted in the written scope, with who will supply it.

The enquiry sheets from the last launch
Whatever list you hold of earlier enquiries, from portals, brokers and walk-ins, shows which sources brought which use. A spreadsheet is enough, even if the columns are untidy. Without it we cannot separate the uses from past data, and the first reading of sources has to wait for new enquiries.
A decision on who takes retail enquiries
Shops and offices need someone who can talk leasing terms, anchor plans and floor layouts. Name that person or team before work begins. Without a named desk, commercial enquiries drop into the home sales queue, which is exactly the mix the work is meant to remove.
Broker names and the terms you offer them
Bring the list of brokers and consultants who already bring you clients, with the arrangement under which they are recorded. Only you can say how a broker's client is protected. Without it, the broker route is left as a plain form and the record may double count the same client.
Access to every portal and ad account
Sources can be tagged only if we can see them. Bring logins or admin rights for the property portals, the search and social ad accounts and the website forms. If a vendor holds them, ask for access first, otherwise some sources stay untagged and the report shows them as unknown.

How it works

How the lead generation work runs

The work itself, in order. How an engagement starts, from your brief to a written scope, is set out on our method page.

  1. 1

    Split last year's enquiries by what they wanted

    We start with the enquiry sheet or portal export your sales team already holds and sort every line into home, office, retail or investor. You help us with the lines nobody labelled. What exists afterwards is the first honest picture of where each use actually gets its interest, kept apart so the sources are not blended.

  2. 2

    Name one entry point per use

    For each use we decide where a visitor enters: a flat enquiry page, a leasing page for shops, a corporate floor-plate page, a broker desk. You choose who answers each one, because the person who takes a retail call is rarely the person who takes a home call, and the form must reach them directly.

  3. 3

    Write the questions that sort the caller

    With your sales head and your leasing manager we draft the short questions each desk asks first: budget band and possession timing for a home, brand, frontage and area for a shop, headcount and floor need for an office. A rough call is tested against them, and you decide which answers move a lead to a visit.

  4. 4

    Give brokers and consultants their own door

    Commercial leads arrive through brokers and property consultants. We set a separate route for them with the details you need, such as client brand and requirement, and agree with you how a broker's enquiry is recorded so that a later direct call from the same client is not treated as new.

  5. 5

    Run a trial enquiry for each use

    We submit a test enquiry as a home buyer, a retailer, an office occupier and an investor, and follow each into your record. You confirm it reached the right desk with the use and source filled in. Then we read the figures against the counts noted before we began.

Where this fits

Three pieces of sales work, in this order.

This work sits inside sales process design, at stage 1, prospecting and lead generation. The audit comes before it, and sales management keeps it running.

  1. Step 1

    Sales audit

    Find where deals are being lost and what to fix first.

    Start here if you cannot say where orders are lost.

  2. Step 2 · you are here

    Sales process design

    One written way to sell, from first enquiry to repeat order.

    Start here if every salesperson sells differently.

  3. Step 3

    Sales management

    A target, a review routine and someone who owns the number.

    Start here if the team has targets and no routine.

Tell us what you need Your brief is read before we call. Scope, fee and term in writing.

FAQ

Questions owners ask before they call.

Not here? More answers, or ask on WhatsApp.

Should homes and shops share one lead form?
No. The two buyers want different information, and a shared form forces both to guess. Give each use its own form, then feed them into one record so the team still sees the whole project.
Do you promise a number of leads?
No. Enquiry volume depends on the project, the location, the launch order and the market. We build the routes and the tracking, and report what comes in against your own earlier record.
How do brokers fit in?
Brokers are a channel with their own pack and their own contact point. We keep their enquiries tagged separately, so you can see what they bring for offices and retail compared with portals and search.
What if a unit is sold but the enquiry still comes in?
Reply with the units that remain and offer the closest match. The form cannot know availability, so someone on the desk must update it. Log the enquiry against the use, so you can see demand for a unit type that has run out.
Do we need separate phone numbers for homes and shops?
Separate numbers help but are not required. What matters is that a call reaches someone who can talk about the right use, and that the person records the use on the enquiry. A single number can work when a receptionist routes by a first question. We look at your call handling and recommend the simpler option. If the numbers are separate, each is printed only on the pages and adverts for its own use, so the source of the call is clear.
What if an investor wants both a flat and a shop?
Record the investor once, with both interests listed, and assign the person who can speak to both or hand over carefully between desks. The enquiry should not be duplicated, because two desks calling the same person with different prices annoys them. We set a field for investor interest and a rule on who leads the conversation. You decide that rule, as it depends on how your sales team is organised.
How much does it cost?
There is no price list, because the work differs by business. The fee is scoped after we have read your brief and spoken to you, and put in writing before anything starts, split into our time, your media spend and production.
How long is the contract?
The term is agreed in writing after we have spoken, along with the fee and the reporting. It is never a default twelve months, and renewal is decided on the numbers against the baseline recorded at the start.
How soon will we see results?
It depends on the trade, the channel and what is already in place. After we have read your brief and spoken to you, we say what we would expect to move first and how it will be measured against the baseline. Nothing here is guaranteed.
Who will actually do the work?
The person you speak to before anything starts. We work from one office in Nagarbhavi, Bengaluru, with no account managers in between.

Your next practical step

Tell us what you are trying to grow, and we will read it before we call.

Eight short steps, mostly taps. Skip anything you would rather answer on the call.