Skip to content
GullySales

Road and paving contractors · CRM

Write down each site once, so a quotation never depends on the owner's memory.

A CRM for a road contractor is a shared record of every site enquiry, from the first call to the final bill. GullySales sets up the fields that matter for road work, trains your estimator and supervisor to fill them, and reports on what the record shows.

Scope, fee, reporting and term are agreed in writing after we have read your brief and spoken to you.

Site engineers inspect a completed pavement

What CRM means

A CRM is the record where every enquiry, call and quote is kept against a customer, replacing separate notebooks, spreadsheets and memory. GullySales sets up or cleans an existing CRM and reports from it by enquiry outcome rather than by activity logged.

Last updated 14 Nov 2026.

For road and paving contractors

Where it usually goes wrong, and what we would do.

  • “The site is the record, not the person”

    A developer may have six layouts and a society may change its committee every year. A record that holds only a name loses the site, the surface and the quantity.

  • “Quotation revisions disappear”

    The first quote, the second after the developer pushed back and the final one agreed are scattered across chats. Nobody can say what was finally agreed.

  • “Site engineers will not type at the end of a long day”

    A form with twenty fields stays empty. The record has to be short enough to fill in with a thumb from the site.

What we do

What we deliver for road and paving contractors.

The work available for this need. We agree the deliverables and responsibilities for your engagement in writing.

  1. A record built around the site

    Each enquiry holds the site address, the contact, the surface, the area, the decision maker and the status, with each site its own entry.

    Result: A developer with six layouts has six records.

  2. A quotation log with revisions

    Every quotation numbered and dated, with the layers and the rate, and each revision kept beside the first.

    Result: The agreed rate can be found in a minute.

  3. A tender register

    A list of notices seen, bid, won and lost, with the department, the last date and the reason for each result.

    Result: You see which kinds of tender you win.

  4. A short mobile entry for site staff

    Five fields a supervisor can fill from the site: place, surface, area, contact and next step.

    Result: Records are written where the work is.

  5. Follow-up list for the estimator

    A list of quotations sent and not answered, sorted by how long they have waited, drawn from the record.

    Result: Silent quotations are chased in order.

How the result is measured

  • Enquiries logged in the CRM
  • Data completeness
  • Reports generated from CRM data

Recorded as a baseline before work starts, so every later report has an honest comparison.

What to record, and when

What a road contractor writes down about each enquiry, and why it earns a place.

Source of the enquiry
Write call, WhatsApp, tender, referral, board or directory the moment it arrives. Without it you cannot tell which source paid when the order is signed.
Site, surface and approximate area
Place name, whether bituminous, concrete or paver block, and an area from the buyer or from your visit. Update the figure after measurement, and keep the first one.
Who decides and who pays
A developer's partner, a society treasurer and a department engineer sign differently. Note the person, their role and whether a vote or a sanction must come first.
Quotation number, rate and revisions
Log each version with the date and what changed. When the buyer says your rival was cheaper, you can see what you offered at which stage.
Reason lost, or the work order received
If it is lost, pick a reason from a short list: price, timing, scope, rival, no decision. A year of reasons tells you whether to change the quotation or the follow-up.
Do you need software yet?
A sheet with one row per site works while one person updates it. Look for software when two people update it at the same time or a reminder is being missed.

Who it is for

This is written for these road and paving contractors.

  • Bituminous road contractors with their own hot mix plant
  • Concrete road contractors (CC and PQC)
  • Paver block and interlocking contractors
  • Layout and township internal road contractors
  • Factory, warehouse and industrial yard paving contractors
  • Municipal and department tender contractors
  • Pothole repair and road maintenance contractors
  • Road marking, kerb and speed breaker contractors

Before you decide

When this may not be the right fit.

  • Site staff will not enter a visit on the phone, so the record would hold only what the owner remembers.
  • You handle few sites in a year, so one shared sheet already holds every layout and quotation.
  • Quotation revisions are kept on personal chats and nobody will move them, so the log would start incomplete.

Before you decide

Agree the work. Know how to judge it.

CRM for road and paving contractors: use these checks to prepare, choose the scope, and review what changes.

Bring the right evidence

List the records your team uses and show how an enquiry becomes an order today. Bring examples of duplicate entries, missing owners, and reports that require manual correction.

Make the scope clear

Agree the stages, required fields, access roles, and integrations before configuring the system. Separate software subscriptions from setup, data work, and training.

Check the work in use

Ask the people who will use the CRM to complete a real handover and find the next action without help. Check that the management report can be traced back to individual records.

Know when to change course

If the process is unclear, buying a more complex CRM adds more places for confusion. Start with the minimum fields and rules the team can use consistently.

These are discussion points, not a fixed package. GullySales confirms the deliverables, responsibilities, fee, and term in writing after reading your brief and speaking with you.

Before we start

What to have ready before the work starts.

The records, access and decisions this work needs from road and paving contractors. Anything missing is noted in the written scope, with who will supply it.

Your quotations from the past season
The quotation log is built from your real revisions, so bring recent quotations, final bills and any WhatsApp threads that hold the rates. Photographs are acceptable. Without them the first records start empty and lessons from past quotations are lost. Where the quotation was revised more than once, bring every version, since the log is meant to show how the rate moved and what the buyer said at each stage.
A decision on what one record means
Choose whether a record is a buyer or a site. We advise the site, since one developer may order several roads. Decide before import, because merging records afterwards takes more effort than setting it right at the start.
Phone numbers of the supervisors
The mobile entry is used by the people on site, so we need the phones they carry and the apps they already use. If some have basic handsets, we plan a voice note to the office instead. Without this the entry screen will not fit the people filling it.
Names of who may edit rates
Quotation rates are sensitive. Decide who may change a revision and who may only view. When this is not settled, a rate can be altered without a trace and the log loses its value as evidence.
The WhatsApp chats that hold history
Much of a contractor's history lives in chats. Choose which threads to export for the import, and agree what is left out. If none are shared, the record starts from the day of switching, and older buyers must be added by hand.

How it works

How the CRM work runs

The work itself, in order. How an engagement starts, from your brief to a written scope, is set out on our method page.

  1. 1

    Trace one site from call to final bill

    We follow a single recent job from the first phone call to the site visit, the quotation, the work order, the laying and the final measurement, writing each handover on a card. At every step, you say who handles the record. That path decides which fields the record needs.

  2. 2

    Choose the tool the estimator will open

    We compare a shared sheet, a simple CRM and a form on the phone against who is in the office and who is on site. You choose. A basic tool that the estimator opens after every call is worth more than a rich one that nobody reaches for.

  3. 3

    Build a test record from three old jobs

    We enter three finished jobs and one lost quotation as test rows, with site, surface, area, each revision of the rate and the reason it was won or lost. You check the rows against what you remember. Mistakes in the fields are found and fixed before the real import.

  4. 4

    Set the rules for revisions and reminders

    With the estimator we decide how a revised quotation is stored beside the first, who is reminded after a quotation goes out and what a supervisor enters from the site. The rules are written into the tool so they do not depend on memory. You test them on a live enquiry.

  5. 5

    Let the office and one supervisor try it

    The estimator and one supervisor enter real enquiries and site visits for a short run while the old notes continue alongside. You tell us where they stall. We cut fields nobody fills and simplify the mobile entry until it takes a minute at the gate.

  6. 6

    Switch over and read the quotations log

    The tool becomes the record and one person is named its owner. We then compare quotations sent, revisions made and orders received with the figures noted before the change. You decide which fields to add or drop, and the log is read as it stands, with nothing promised about the orders.

Where this fits

Three pieces of sales work, in this order.

This work sits inside sales management. A target, a review routine and someone who owns the number.

  1. Step 1

    Sales audit

    Find where deals are being lost and what to fix first.

    Start here if you cannot say where orders are lost.

  2. Step 2

    Sales process design

    One written way to sell, from first enquiry to repeat order.

    Start here if every salesperson sells differently.

  3. Step 3 · you are here

    Sales management

    A target, a review routine and someone who owns the number.

    Start here if the team has targets and no routine.

Tell us what you need Your brief is read before we call. Scope, fee and term in writing.

FAQ

Questions owners ask before they call.

Not here? More answers, or ask on WhatsApp.

Is a spreadsheet enough for a contractor our size?
For a few dozen live sites, yes, if each row is a site and a named person owns it. Move to software when two people need to edit the same record at once or follow-up reminders are being missed.
How do we get supervisors to update it?
Give them five fields and a reason, such as the site's measurement reaching the estimator without a phone call. Check the record against the diary and thank the person whose entries are complete.
What do we do with WhatsApp chats that hold the history?
Export the key ones and attach them to the site's entry. The quotation and the client's last question are what matter. Keep the full chat only where there is a dispute.
Who owns the data if a staff member leaves?
The company does, provided the record is on an account the company controls. Keep logins under a business email, not a personal one, and take the record, not the phone.
Do we need to move old quotations into the new record?
Move the live ones and the last season's lost ones, and leave older papers in a folder. The live quotations are the follow-ups you need now, and the lost ones tell you why work slipped away. We import them with you and mark the rest as archived. Entering every old quotation costs effort and adds little to the first reading.
Can the record hold photographs from the site visit?
Yes, and it should, because a photograph of the site at the visit settles later arguments about the base, the access and the area. Store them against the site record, not on a supervisor's phone. We set up a simple way to attach them from the phone, and agree how many are enough, so the habit stays light.
How much does it cost?
There is no price list, because the work differs by business. The fee is scoped after we have read your brief and spoken to you, and put in writing before anything starts, split into our time, your media spend and production.
How soon will we see results?
It depends on the trade, the channel and what is already in place. After we have read your brief and spoken to you, we say what we would expect to move first and how it will be measured against the baseline. Nothing here is guaranteed.
Who will actually do the work?
The person you speak to before anything starts. We work from one office in Nagarbhavi, Bengaluru, with no account managers in between.
What do you need from us?
Your brief, and a conversation. After that, access to whatever this work touches, such as your website, your accounts or your enquiry record, and time with the people who handle your enquiries.

Your next practical step

Tell us what you are trying to grow, and we will read it before we call.

Eight short steps, mostly taps. Skip anything you would rather answer on the call.