Structural contractors · Lead generation
Find the builders who are about to pour, before the frame is sublet.
Lead generation for a structural contractor means reaching the builders, main contractors and engineers who hand out frame work, and the owners of old buildings who need strengthening. GullySales sets up the sources, the capacity sheet and the enquiry record so that each lead is traced to an order or a loss.
Scope, fee, reporting and term are agreed in writing after we have read your brief and spoken to you.

What lead generation means
Lead generation is the combined work of every channel that brings in a new enquiry, whether from search, adverts, referrals or a stall at an exhibition. GullySales runs these channels together and reports the number of enquiries each one produced, not the activity behind it.
Also for structural contractors
- CRM for structural contractors
- Follow-up systems for structural contractors
- SEO for structural contractors
- Local SEO for structural contractors
- Social media marketing for structural contractors
- Content marketing for structural contractors
- Buyer persona for structural contractors
- WhatsApp marketing for structural contractors
Sales and marketing for structural contractors, the overview.
Plan the next part of the work
Last updated 21 Nov 2026.
For structural contractors
Where it usually goes wrong, and what we would do.
“The best lead is a plot that has not yet been sublet”
A builder who has cleared a plot and received a sanctioned plan is choosing a frame gang just as a foundation starts. A contractor who learns of the plot from the steel yard or the ready-mix plant is in the room first. One who waits for a tender notice meets four rivals.
“Builders call the gang they have already seen finish”
A builder gives a new block to the contractor whose last slab was cast on the promised date. Lead generation here is partly memory: every finished site is a reason for the same builder to ring again, and nobody records that call as a lead.
“Strengthening enquiries arrive without an engineer's report”
An owner with a cracked beam rings a contractor before any engineer has looked at it. If the call is treated like a normal frame lead, the contractor either chases a job with no scope or turns away a genuine one. The report comes first, and the enquiry needs sorting on that basis.
What we do
What we deliver for structural contractors.
The work available for this need. We agree the deliverables and responsibilities for your engagement in writing.
A map of builders by site stage
A list of builders and main contractors in your towns, marked by whether they are at plot, plan, foundation or frame stage, built from public information and your own contacts.
Result: You can see which builders are likely to need a gang next and which you have not called.
A capacity sheet to attach to every introduction
Gangs, shuttering, props, pumps and supervisors, written in one page so a builder can judge fit without a visit.
Result: Each introduction carries the same sheet, kept current by your office.
An enquiry record with a source column
Every call, message and referral entered with where it came from: builder, engineer, steel yard, search, owner or another contractor.
Result: At the end of a quarter you can name the source of each order won.
A sorting note for strengthening calls
A short script and page that asks the owner for the building's age, the damage seen and whether an engineer has been consulted.
Result: Strengthening calls are separated from frame leads on the first conversation.
An introduction to steel yards and ready-mix plants
A brief for the suppliers who hear of pours before anyone, saying what work you take and the towns you cover.
Result: Suppliers know what to say when a builder asks them for a frame contractor.
How the result is measured
- Relevant enquiries by source
- Duplicate and unsuitable enquiries
- Time to the first response
- Accepted enquiries reaching an agreed next step
Recorded as a baseline before work starts, so every later report has an honest comparison.
What to capture or send
What a frame contractor records when a builder or an owner first calls.
- Plot stage: excavation, footing or slab
- Ask which stage the builder has reached. A plot that has not been sublet is a live lead, and one with a gang already on it is only a price check.
- Drawings and engineer's name
- Ask for the structural drawing set and who designed it. Without drawings you cannot price the frame, and the engineer is also a person who may recommend you.
- Labour only or material and labour
- Record which the builder expects. A rate per square foot means different things in each, which is why the same job gets two very different quotes.
- Number of floors and pour dates
- Note the floors and when the first slab is planned. It shows whether your gangs are free then, so you do not promise a start you cannot staff.
- Old-building owner with a crack
- Record whether an engineer's report exists. If it does not, the first step is a site visit with an engineer, not a quotation for strengthening.
Who it is for
This is written for these structural contractors.
- RCC frame contractors working for builders and developers
- Labour-only structural contractors
- Contractors who supply material and labour for frames
- Steel structure fabrication and erection contractors
- Mezzanine and additional floor contractors
- Retrofitting and strengthening contractors
- Shuttering and formwork contractors
- Contractors who work for industrial shed and PEB clients
Before you decide
When this may not be the right fit.
- Your gangs are fully booked on current frames, so more enquiries would only be turned away or answered late.
- You have no photographs or drawings of frames you have finished, so a builder who asks for proof gets nothing to look at.
- Nobody is assigned to call a builder back within the day, so enquiries from a site would go cold in a phone log.
Before you decide
Agree the work. Know how to judge it.
Lead generation for structural contractors: use these checks to prepare, choose the scope, and review what changes.
Bring the right evidence
Define the organisations or buyers you can serve and the reasons they would consider a conversation. Bring examples of accepted and rejected prospects so the selection rule is visible.
Make the scope clear
Agree the research sources, contact approach, qualification rules, and handover. Clarify which meetings count as accepted and what happens to replies that are not ready to buy.
Check the work in use
Review why a prospect was selected and what was learned from the response. Count held, relevant conversations separately from contacts found, messages sent, or meetings booked.
Know when to change course
If the same objection appears repeatedly, adjust the offer or buyer group before increasing outreach. Respect a request to stop contact and keep the exclusion in the record.
These are discussion points, not a fixed package. GullySales confirms the deliverables, responsibilities, fee, and term in writing after reading your brief and speaking with you.
Before we start
What to have ready before the work starts.
The records, access and decisions this work needs from structural contractors. Anything missing is noted in the written scope, with who will supply it.
- A list of frames you have completed
- Write down each building with the number of floors, the type of structure, the builder and the year, from memory or from old bills. A notebook page is enough. Without it the capacity sheet is a claim with nothing behind it, and a builder who asks for proof will find none.
- Equipment and gang strength as they stand
- State honestly how many gangs you have, what shuttering and props you own and what you hire in. If the position changes with the season, say so. If this is missing, we cannot say how many sites you can take, and the plan may bring more enquiries than the firm can carry.
- A decision on payment terms you will accept
- Builders ask about payment before anything else, so decide in advance the stage payments, advance and retention you will accept, and the builders you will not work for again. Without a decision, the sorting of leads has no way of rejecting a bad one, and the capacity sheet promises gangs to a builder who pays late.
- Names of three builders who vouch for you
- Ask them yourself whether they are willing to be mentioned or called. A builder's word is what moves another builder. If none agrees, the introductions go out without a referee and the capacity sheet has to carry more weight.
- Photographs from two live sites
- Bar binding, shuttering and a pour in progress show discipline that a finished building hides. Phone pictures are acceptable if the site is safe and the builder agrees. Without them the map and the capacity sheet are only words.
How it works
How the lead generation work runs
The work itself, in order. How an engagement starts, from your brief to a written scope, is set out on our method page.
- 1
Fill in the capacity sheet first
Before anyone is approached we sit with you and the site head and write down what the firm can actually build: the gangs on the payroll, the shuttering and props owned, the cranes or hired machines, the storeys and spans you have completed. You decide what you will and will not take on. What exists afterwards is a single sheet that can be attached to every introduction, and a clear limit on the work you are ready to receive.
- 2
Map builders by the stage of their plots
We list the builders and developers in the towns you serve and, from the municipal plan approvals and from what your own supervisors see, note which plots are cleared and which have a foundation under way. You tell us which builders you know and which have burnt others on payment. The result is a map of plots that will need a frame soon, arranged by how close each is to the pour.
- 3
Walk the nearest steel yard and ready-mix plant
We go with you or your supervisor to the steel yards, the ready-mix plants and the shuttering hire shops that your buyers also use, and ask who would introduce a reliable frame gang. You decide whom to trust with your name. The outcome is a short list of suppliers who will pass on a builder's enquiry when they hear one.
- 4
Rewrite how the phone is answered
We change the way the office and the site answer a builder's call so that every enquiry records the plot, the number of floors, the engineer's name and who is calling. You approve the questions and decide who may quote a rate by phone. A call then becomes a line in the enquiry record with a source, and not a half-remembered message.
- 5
Sort strengthening calls before a visit
Calls from owners of old buildings arrive without an engineer's report, so we write a short sorting note: what to ask, what to photograph, and when to say that an engineer must look first. You approve the note and name the engineer you refer to. Those calls then stop costing a site visit before the real problem is known.
- 6
Read orders and losses against each source
We lay each order and each lost quotation against the source recorded, and compare with the figures kept before the work began. You tell us which builders confirmed work and which only asked for a rate. We then see which route produced frames and which produced price checks, and decide where to put the next effort.
Where this fits
Three pieces of sales work, in this order.
This work sits inside sales process design, at stage 1, prospecting and lead generation. The audit comes before it, and sales management keeps it running.
Step 1
Sales audit
Find where deals are being lost and what to fix first.
Start here if you cannot say where orders are lost.
Step 2 · you are here
Sales process design
One written way to sell, from first enquiry to repeat order.
Start here if every salesperson sells differently.
Step 3
Sales management
A target, a review routine and someone who owns the number.
Start here if the team has targets and no routine.
FAQ
Questions owners ask before they call.
Not here? More answers, or ask on WhatsApp.
Can you give me a list of builders who need a contractor?
Do I need a website to get frame leads?
How do I tell a genuine lead from a price check?
Do generic lead lists of builders work for a frame contractor?
Will you contact the builders for us?
How soon will we see results?
Who will actually do the work?
What do you need from us?
What if we are not happy with the work?
More for structural contractors
Related work to consider.
Closest to this: leads and follow-up
Also for structural contractors
Or start from the overview: sales and marketing for structural contractors.
Your next practical step
Tell us what you are trying to grow, and we will read it before we call.
Eight short steps, mostly taps. Skip anything you would rather answer on the call.