Skip to content
GullySales

Township developers · CRM

Keep one record for each family, from the hoarding call to the final handover.

A CRM for a township holds each family's enquiry, visits, questions, bookings and payment stages in one place, across phases and across sales staff. GullySales sets up the fields, the stages and the reports so the record survives staff changes.

Scope, fee, reporting and term are agreed in writing after we have read your brief and spoken to you.

Realistic editorial illustration of real estate developers and brokers at work in India

What CRM means

A CRM is the record where every enquiry, call and quote is kept against a customer, replacing separate notebooks, spreadsheets and memory. GullySales sets up or cleans an existing CRM and reports from it by enquiry outcome rather than by activity logged.

Last updated 14 Nov 2026.

For township developers

Where it usually goes wrong, and what we would do.

  • “A township sale outlasts the sales person”

    Enquiry to handover can run across several staff moves. When the executive leaves with the notes in a phone, the family repeats everything to a stranger.

  • “Phases need to share one list”

    A family who asked about phase one and now sees phase three should show as a returning enquirer. Separate sheets per phase hide them.

  • “Partner bookings need the partner on the record”

    If the partner is added after the booking, disputes follow. The CRM should ask who introduced the family at the first call.

  • “Payment stages are part of the relationship”

    A family on a construction-linked schedule needs a reminder and a clear receipt. Keeping this in an accounts file the sales team cannot see leads to the wrong call at the wrong time.

What we do

What we deliver for township developers.

The work available for this need. We agree the deliverables and responsibilities for your engagement in writing.

  1. Stages from enquiry to handover

    A pipeline with named stages: enquiry, visit, shortlist, booking, agreement, payment, handover.

    Result: Every family sits in exactly one stage.

  2. Fields for family, budget and question

    Family size, budget, preferred plot or home type, source, partner and the question asked.

    Result: A new sales person can read the record and carry on.

  3. A visit record

    Date, pickup point, who attended, the plots shown and what the family said.

    Result: Each visit leaves a written note on the family's record.

  4. Partner and source reports

    Lists of enquiries and bookings by partner and by source for each phase.

    Result: The sales head can see which partners and sources bring bookings.

  5. Staff handover rules

    A short written rule for reassigning a family's record when a staff member leaves.

    Result: No family's record is left with a departed employee.

How the result is measured

  • Enquiries logged in the CRM
  • Data completeness
  • Reports generated from CRM data

Recorded as a baseline before work starts, so every later report has an honest comparison.

Fields worth keeping

Fields a township needs against every family and partner.

Phase and unit of interest
Filled by the sales executive at the first call. It lets you list everyone who asked about a plot row when a unit returns.
Visit date and attendees
Filled at booking. It shows who has seen the site and who has not, so follow-up fits the stage.
Question asked on the visit
Filled by the executive after the visit. It lets the next call answer what the family actually raised.
Payment stage and next due date
Filled by the accounts team after booking. It keeps the sales team from calling a family at the wrong stage.
Channel partner and rule applied
Filled when the lead enters. It records who brought the family and which attribution rule applies.
Consent to message
Filled by whoever collects the number. It decides who can receive broadcasts and who only gets replies.

Who it is for

This is written for these township developers.

  • Plot buyers in planned layouts
  • Apartment and villa buyers inside the township
  • Families upgrading from rented city homes
  • NRI buyers
  • Investors buying plots for resale
  • Retailers and schools taking commercial blocks
  • Channel partners and local brokers
  • Employees of nearby industries and campuses

Before you decide

When this may not be the right fit.

  • The team keeps changing and nobody has agreed to log visits, so the record would be incomplete from the start.
  • You have only one phase and a few dozen enquiries, which a sheet can hold for now.
  • You want partners to see all family details, which exposes personal data you must protect.

Before you decide

Agree the work. Know how to judge it.

CRM for township developers: use these checks to prepare, choose the scope, and review what changes.

Bring the right evidence

List the records your team uses and show how an enquiry becomes an order today. Bring examples of duplicate entries, missing owners, and reports that require manual correction.

Make the scope clear

Agree the stages, required fields, access roles, and integrations before configuring the system. Separate software subscriptions from setup, data work, and training.

Check the work in use

Ask the people who will use the CRM to complete a real handover and find the next action without help. Check that the management report can be traced back to individual records.

Know when to change course

If the process is unclear, buying a more complex CRM adds more places for confusion. Start with the minimum fields and rules the team can use consistently.

These are discussion points, not a fixed package. GullySales confirms the deliverables, responsibilities, fee, and term in writing after reading your brief and speaking with you.

Before we start

What to have ready before the work starts.

The records, access and decisions this work needs from township developers. Anything missing is noted in the written scope, with who will supply it.

Every register where families are recorded
Notebooks, spreadsheets, partner lists and the accounts ledger, gathered in one place. Families sit in two or three of them under different spellings. If some registers stay with individuals, the new record starts incomplete, and the missing families will stay invisible.
Your payment schedule stages
The stages at which a buyer pays, such as booking, agreement and each construction or development milestone, in the form your accounts head uses. The CRM carries these as stages. If the schedule differs across phases, we need each, or reports will mix them. Include any family on a changed schedule, since the record must show the schedule that family actually signed.
A list of staff and their roles
Names, roles and which families each handles at present. We need it to set access and to reassign records when someone leaves. Without it, we cannot give each person the right view and everyone sees everything.
Agreement on what a partner may see
A decision from you on whether partners see only the families they introduced, or also the inventory, or nothing but a status. This protects both the families and your commission rules. Until it is made, partners stay out of the system.
One person with time to test
Someone from sales or accounts who can check the test copy for a few sessions and say, plainly, what is wrong. If no one has time, we cannot confirm the record fits how your team works, and the switch waits.

How it works

How the CRM work runs

The work itself, in order. How an engagement starts, from your brief to a written scope, is set out on our method page.

  1. 1

    Trace one family from call to handover

    We pick one family who has bought and trace everything that happened: the first call, each visit, every document, each payment stage, the handover. Your sales head and accounts head tell us where the trail lived and where it was lost. What exists afterwards is the true journey of a buyer, drawn from one real case, with the points where a person had to remember something instead of reading it from a record marked in the margin.

  2. 2

    List who needs to see what

    Sales staff, the accounts team, the site engineer and partners each need different parts of a family's record. You decide who may view, edit and export. We write the access rules on one page, so a departing salesperson cannot take the list with them and partners see only their own families.

  3. 3

    Design the stages and the fields

    We draft stages from the first enquiry to the final handover, with the fields each stage needs: budget, family, plot preference, visit date, loan status. You trim the fields to what your team will really fill in. The result is a configuration on paper that you approve before we build it.

  4. 4

    Move the old registers into a test copy

    We load a sample of your existing enquiry and booking registers into a test version, correcting duplicates and missing sources. You check twenty or so families you know well against it. If the test copy tells the wrong story about them, we fix the rules before any real data is moved. Duplicates we cannot settle ourselves go to your sales head as a short list, and nothing is merged without a name beside the decision.

  5. 5

    Connect the website and the partner route

    The phase enquiry form and the partner introduction route are linked so a new enquiry appears with its source already marked. We submit test enquiries and watch them arrive. You see that a partner's family cannot be assigned to another partner. Anything that fails is corrected before staff start using it.

  6. 6

    Hand over to staff and name an owner

    We train the site office team with their own records, not sample ones, and leave a one-page guide for each role. You name the person who owns the CRM and decides changes. After the next phase launch we compare what the record shows with your old registers, and you decide what to adjust, including any field that staff left empty so consistently that it should be removed.

Where this fits

Three pieces of sales work, in this order.

This work sits inside sales management. A target, a review routine and someone who owns the number.

  1. Step 1

    Sales audit

    Find where deals are being lost and what to fix first.

    Start here if you cannot say where orders are lost.

  2. Step 2

    Sales process design

    One written way to sell, from first enquiry to repeat order.

    Start here if every salesperson sells differently.

  3. Step 3 · you are here

    Sales management

    A target, a review routine and someone who owns the number.

    Start here if the team has targets and no routine.

Tell us what you need Your brief is read before we call. Scope, fee and term in writing.

FAQ

Questions owners ask before they call.

Not here? More answers, or ask on WhatsApp.

Which CRM do you recommend for a township?
One your sales team will actually open every day and that fits your budget. GullySales sets up the tool you choose; the stages and fields matter more than the product name.
Can partners see the CRM?
Give partners only what they need, such as availability and their own referrals. Customer details belong to your company and its privacy rules, so decide access with your adviser.
Can channel partners see the CRM?
Give a partner a view limited to their own families and current inventory. Showing every buyer exposes personal data and other partners' leads. A shared sheet of available plots, updated daily by the sales desk, solves the stale-inventory problem without that risk.
Should the CRM hold payment details?
Hold the stage and the next due date, not account numbers or card details. The sales team needs to know when to call or not to call; the accounts system holds the money. Keep the two linked by a booking number.
Do we have to buy new software?
Not necessarily. We first look at what you already pay for and what your team will open each morning. If a shared sheet with strict rules would do, we say so. If you need a proper system, we recommend one that fits the size of your sales team and your budget. The choice is yours, and we explain what each option will cost you in effort, not only in money.
Who keeps the families when a salesperson moves on?
Their families stay in the record, and the sales head reassigns them. That is the purpose of the access rules we write. Before the person goes, we check that every open family has a next step and a note. The departing person's own phone contacts are a separate matter, which your sales head and adviser should settle with the staff member.
How much does it cost?
There is no price list, because the work differs by business. The fee is scoped after we have read your brief and spoken to you, and put in writing before anything starts, split into our time, your media spend and production.
How long is the contract?
The term is agreed in writing after we have spoken, along with the fee and the reporting. It is never a default twelve months, and renewal is decided on the numbers against the baseline recorded at the start.
How soon will we see results?
It depends on the trade, the channel and what is already in place. After we have read your brief and spoken to you, we say what we would expect to move first and how it will be measured against the baseline. Nothing here is guaranteed.
Who will actually do the work?
The person you speak to before anything starts. We work from one office in Nagarbhavi, Bengaluru, with no account managers in between.

Your next practical step

Tell us what you are trying to grow, and we will read it before we call.

Eight short steps, mostly taps. Skip anything you would rather answer on the call.