Skip to content
GullySales

Waterproofing contractors · Website

Build a site that shows the work, the method and the form to book a survey.

A website for a waterproofing contractor is the place where a committee or an engineer checks what you have done and how you do it before agreeing to a visit. GullySales works on page structure, finished-job galleries, the enquiry form and the speed of the site on a phone.

Scope, fee, reporting and term are agreed in writing after we have read your brief and spoken to you.

Waterproofing contractors: show a real physical business scene illustrating Leak inspection report. Record photos, moisture spots, the area measured and the likely source on a phone, standing on the terrace. The report is done on site.

What website means

A website is the page a customer lands on after searching, clicking an advert or scanning a code, and it decides whether they call or leave. GullySales builds and maintains sites that load quickly, explain the offer plainly and make the enquiry form or phone number easy to find.

Last updated 14 Nov 2026.

For waterproofing contractors

Where it usually goes wrong, and what we would do.

  • “The first screen should say what you waterproof”

    A visitor arriving from a map listing wants to know at once that you handle basements, terraces, tanks or bathrooms. A general headline about quality and experience leaves the visitor to hunt through menus, and the visitor returns to search.

  • “The gallery is the strongest page”

    Photographs of preparation, membrane, protection and a flood test, with area type and location kept private where required, convince an engineer. An empty gallery or stock images make a visitor wonder whether the work has been done.

  • “The form decides what the estimator receives”

    A form with only a name and number sends the estimator to a site blind. A form asking for the area of the building, building age, where water appears and a photograph upload brings an enquiry that can be judged before the visit.

  • “A site that loads slowly in a basement loses the caller”

    Owners search from a phone with a weak signal, standing by the leak. A heavy site with large images fails there. Compressed photographs, simple pages and a visible call or message button keep the visitor on the page.

What we do

What we deliver for waterproofing contractors.

The work available for this need. We agree the deliverables and responsibilities for your engagement in writing.

  1. A site map built around problems and buildings

    Home, a page for each area of the building, finished jobs, systems and brands, about the crew, contact and survey booking.

    Result: A visitor reaches the right page in one or two steps.

  2. A finished-jobs gallery

    Photographs and short descriptions from your sites, with each owner's permission, organised by area type.

    Result: The site shows real work in the order a buyer looks for it.

  3. A systems and brands page

    The chemical systems you apply, the brands that have trained your crew and the sort of sites you have handled.

    Result: A consultant can see at once whether you match a specification.

  4. An enquiry form for surveys

    Fields for location in the building, building age, source of water and photographs, sending the details to your log and to WhatsApp.

    Result: Each enquiry arrives with detail an estimator can use.

  5. Mobile speed and call buttons

    Image compression, simple layouts and a message and call button on every page.

    Result: The site loads and works on an ordinary phone connection.

How the result is measured

  • Page load time
  • Bounce rate
  • Enquiries from the website

Recorded as a baseline before work starts, so every later report has an honest comparison.

Searches your buyers type

The pages a waterproofing site needs, each answering one search.

terrace waterproofing contractor
A terrace page with the layers, a flood-test photograph and a survey form beneath it.
basement waterproofing system
A page on positive and negative side methods, written for an engineer and readable by an owner.
bathroom leakage repair without breaking tiles
A page on injection and coating options, with a plain note on where the method does not apply.
waterproofing guarantee what is covered
A page stating the area, system and exclusions. Builders and committees open it before comparing quotations.
waterproofing applicator for builders
A specifier page with systems applied, sites completed and a contact form for tender invitations.
waterproofing company [city] reviews
A reviews and jobs page with owner-approved quotes and photographs, linked from the home page.

Who it is for

This is written for these waterproofing contractors.

  • Basement and sump waterproofing contractors
  • Podium deck, terrace and garden area waterproofing contractors
  • Water tank and swimming pool waterproofing specialists
  • Bathroom and kitchen wet area leakage repair firms
  • Injection grouting and crack repair specialists
  • Brand-approved applicators of chemical systems
  • Membrane and coating applicators for commercial buildings
  • Annual maintenance contractors for apartment societies

Before you decide

When this may not be the right fit.

  • You have no photographs of finished work to put on the pages, and a polished site without proof would not convince a committee.
  • Your enquiries come only through brand lists, so a website would be seen after the decision is made.
  • No one will answer the form, and a survey request that sits unread costs more than having no form.

Before you decide

Agree the work. Know how to judge it.

Website for waterproofing contractors: use these checks to prepare, choose the scope, and review what changes.

Bring the right evidence

List the pages that support a buying decision and the actions visitors must complete. Keep examples of failed forms, unclear product information, and questions your team answers repeatedly.

Make the scope clear

Agree the page list, content ownership, integrations, and who controls the domain and hosting. Include redirects and existing search traffic in a redesign brief, before changing addresses.

Check the work in use

Complete a real enquiry journey on a phone and a laptop. Check that the confirmation appears, the enquiry reaches the right person, and tracking records the action once.

Know when to change course

If visitors can enquire but the team does not follow up, start with the sales handover. A larger website will not resolve that delay.

These are discussion points, not a fixed package. GullySales confirms the deliverables, responsibilities, fee, and term in writing after reading your brief and speaking with you.

Before we start

What to have ready before the work starts.

The records, access and decisions this work needs from waterproofing contractors. Anything missing is noted in the written scope, with who will supply it.

Domain and hosting access
We need to know who holds the domain and the hosting and to have access or a named helper. A site cannot be mended without it, and a domain in a former partner's name is a risk. If the site was built by a former freelancer, tell us, because the login is the first thing we must recover.
Photographs of finished jobs and layers
Provide photographs of completed work with owner permission, and of the layers if you have them. If any building type has none, that page waits for a photograph. Pictures with the crew's faces need the crew's consent, which you should confirm before they are sent.
A list of systems and training you hold
Write the systems you apply and any training certificates, with the brand's name beside each. The systems page uses it. We claim nothing you cannot document, so if a certificate is not in hand, the page names the system and leaves the credential out until it is.
The localities and buildings you serve
State where your crews work and the kinds of building. The site lists them. A locality listed but not served brings calls you cannot take. Add the localities where you have completed jobs, because a page for a locality without a finished job there reads as filler to an owner.
A decision on prices on the site
Decide whether any rate appears. We recommend against it, because a rate page attracts the wrong visitor, but the choice is yours and applies throughout.

How it works

How the website work runs

The work itself, in order. How an engagement starts, from your brief to a written scope, is set out on our method page.

  1. 1

    Open the current site on a basement phone

    We load the site on a phone in a poor signal, as an owner would in a basement, and note what appears first, how slowly and whether the call button works. You add what callers complain about. These notes decide whether the site is mended or rebuilt. We also open the site in a second browser and a second phone, because the buyer's device is rarely the one the developer used.

  2. 2

    Build the site map around problems and buildings

    We list the pages: basements, terraces, bathrooms, tanks, podium decks, and the buildings you serve. Say which of these jobs you want more of. The first screen says what you waterproof and where.

  3. 3

    Choose the finished jobs for the gallery

    With your supervisor we pick finished jobs with photographs of the layers and write a short caption for each. The owner's permission is obtained first. The gallery is the strongest page, so weak pictures are left out. We choose the images so that each shows a layer or a finished area rather than a crew pose, because the engineer reads the layers.

  4. 4

    Write the page on systems and brands

    A consultant looks for the products and systems you apply and the training you hold. We write the page with you and include nothing that cannot be shown. Check the brand's current rules on how its name and logo may be used.

  5. 5

    Design the survey form around the estimator

    The form asks for the locality, the building type, the age and the problem, and allows a photograph. You tell us what the estimator chases by phone, and those details become fields. We test it on a phone. Fields marked as required are kept to the few the estimator truly cannot price without, so the form does not turn away a worried owner.

  6. 6

    Compare surveys booked with the earlier count

    After launch we compare the survey requests and calls from the site with the count recorded before we began. You see which pages bring a survey and which only bring a visit, and decide the next change.

Where this fits

Three pieces of sales work, in this order.

This work sits inside sales process design, at stage 1, prospecting and lead generation. The audit comes before it, and sales management keeps it running.

  1. Step 1

    Sales audit

    Find where deals are being lost and what to fix first.

    Start here if you cannot say where orders are lost.

  2. Step 2 · you are here

    Sales process design

    One written way to sell, from first enquiry to repeat order.

    Start here if every salesperson sells differently.

  3. Step 3

    Sales management

    A target, a review routine and someone who owns the number.

    Start here if the team has targets and no routine.

Tell us what you need Your brief is read before we call. Scope, fee and term in writing.

FAQ

Questions owners ask before they call.

Not here? More answers, or ask on WhatsApp.

What should be on the home page?
What you waterproof, where you work, three photographs of finished jobs, the brands you are trained on and a clear way to book a survey. Leave detailed method for the pages below, so the home page stays short.
Should the website show prices?
Do not publish a price per square foot. It invites comparison without context. Explain how a survey sets the scope and the figure, and offer to visit. A buyer who understands this is more likely to book.
Do we need a separate site for builders?
Not necessarily. One site can carry a section for consultants and builders with systems, sites of comparable size and a specifier pack. Keep it linked from the home page so the right visitor finds it.
Should the site list the areas we serve?
Yes, only those your crew will reach. A visitor outside your area wastes a form fill and a call. Naming localities also helps map searches, so keep the list true and update it when a new supervisor widens your reach.
Should the site show the warranty terms?
Show the terms only if they are in writing and you will honour them as stated. A committee wants to see what is covered and for how long before agreeing, so a short section on the systems or survey page helps. Have your own adviser read the wording. We place it, but you own the terms.
Should the gallery show where each job was done?
Show the locality and the building type, not the street or the flat number. An owner finds it reassuring to see a job near them, and the owner who allowed the photograph is protected. We ask for permission before a photograph is added, and the caption names the problem and the method used.
How long is the contract?
The term is agreed in writing after we have spoken, along with the fee and the reporting. It is never a default twelve months, and renewal is decided on the numbers against the baseline recorded at the start.
How soon will we see results?
It depends on the trade, the channel and what is already in place. After we have read your brief and spoken to you, we say what we would expect to move first and how it will be measured against the baseline. Nothing here is guaranteed.
Who will actually do the work?
The person you speak to before anything starts. We work from one office in Nagarbhavi, Bengaluru, with no account managers in between.
What do you need from us?
Your brief, and a conversation. After that, access to whatever this work touches, such as your website, your accounts or your enquiry record, and time with the people who handle your enquiries.

Your next practical step

Tell us what you are trying to grow, and we will read it before we call.

Eight short steps, mostly taps. Skip anything you would rather answer on the call.