Skip to content
GullySales

Window, door and glass companies · Lead generation

Every measured site should end in a call, not a filed quote.

Lead generation for a window, door or glass company is the enquiry that becomes a site measurement, and the measurement that becomes an advance. GullySales qualifies the enquiry before a surveyor is sent, gets the quote out, and puts a follow-up on every site already measured.

Scope, fee, reporting and term are agreed in writing after we have read your brief and spoken to you.

Realistic editorial illustration of window, door and glass companies at work in India

What lead generation means

Lead generation is the combined work of every channel that brings in a new enquiry, whether from search, adverts, referrals or a stall at an exhibition. GullySales runs these channels together and reports the number of enquiries each one produced, not the activity behind it.

Plan the next part of the work

Last updated 21 Nov 2026.

For window, door and glass companies

Where it usually goes wrong, and what we would do.

  • “The measurement visit is the expensive part”

    An afternoon measuring fourteen openings is half a day of your surveyor. Sending the surveyor to everyone who asked a rate costs more than the enquiry was worth.

  • “Architect referrals arrive without an enquiry form”

    A practice that has walked through your installation writes you into the drawing set. That source is worked by visits and samples, not by advertising.

  • “A builder enquiry is a tender with a date on it”

    The purchase team wants a rate per square foot, your crew capacity and your last three towers. A homeowner-style quote loses it before it is read.

What we do

What we deliver for window, door and glass companies.

The work available for this need. We agree the deliverables and responsibilities for your engagement in writing.

  1. Questions asked before a surveyor is booked

    How many openings, which floor, replacement or new build, the locality and who signs off, asked the same way on every enquiry.

    Result: Surveyor days go to buyers rather than to rate checks.

  2. A quote within a working day of the measurement

    A standing rule that the measured openings, the system, the glass and the price go out the next day, with the comparison sheet attached.

    Result: Nobody has a week to collect two cheaper quotes.

  3. A follow-up on every site measured

    A call two days after the quote and another the week after, with the reason written down when the order goes elsewhere.

    Result: No measured site is left sitting in a folder.

  4. A visit programme for architects and designers

    The practices designing villas, offices and hotels in your area listed, with a sample corner, the sections and an installed site to visit.

    Result: Your system gets drawn in before a tender exists.

  5. A builder and developer pipeline

    Upcoming towers tracked, the purchase team identified, and the capacity and past project document prepared before the enquiry is issued.

    Result: You are shortlisted rather than invited late.

  6. One record from enquiry to advance

    Enquiry, source, measurement date, quote, order and reason lost, kept where the surveyor and the office both work from it.

    Result: You can see where orders actually go missing.

How the result is measured

  • Relevant enquiries by source
  • Duplicate and unsuitable enquiries
  • Time to the first response
  • Accepted enquiries reaching an agreed next step

Recorded as a baseline before work starts, so every later report has an honest comparison.

Where enquiries come from

The ways a window, door or glass enquiry arrives, and what to ask before a surveyor leaves the factory.

A homeowner calling from Maps or search
Ask the number of openings, the type, whether the building is new or occupied and the problem, such as noise or a leaking sill. Book the measurement only after these answers.
An architect specifying your system
Record the project, the drawing schedule and the stage. Ask for the contact of the builder who will tender it, so you can quote before the specification is changed.
A builder or developer
Write down the number of units, the opening schedule, the handover date and who approves the rate. A builder's enquiry is a tender with a date, so mark the deadline on the record.
An interior designer
Note the designer, the client and the finish. Designers need samples and drawings they can show a client, so ask what they will bring to the meeting.
A profile or hardware brand forwarding a lead
Tag the brand and check its current rules on how its leads are shared. These leads may go to several fabricators, so reply and book the visit on the same day if you can.
A past customer or a neighbour
Record the old job and the new address. A neighbour who has seen the window in a finished flat wants to hear about it, so ask the first owner if a visit is possible.

Who it is for

This is written for these window, door and glass companies.

  • uPVC window and door fabricators
  • Aluminium window and sliding system fabricators
  • Glass processors offering toughened, laminated and double glazed units
  • Glass partition, shower enclosure and railing companies
  • Façade and structural glazing contractors
  • Wooden and engineered door manufacturers
  • Security, steel and fire-rated door suppliers
  • Mosquito mesh, grille and window accessory companies

Before you decide

When this may not be the right fit.

  • Nobody owns the call after a measurement, so more enquiries would only add quotes that go quiet in someone's phone
  • You cannot yet tell a builder tender from a homeowner enquiry, and sending both through one process would waste the surveyor's visit

Before you decide

Agree the work. Know how to judge it.

Lead generation for window, door and glass companies: use these checks to prepare, choose the scope, and review what changes.

Bring the right evidence

Define the organisations or buyers you can serve and the reasons they would consider a conversation. Bring examples of accepted and rejected prospects so the selection rule is visible.

Make the scope clear

Agree the research sources, contact approach, qualification rules, and handover. Clarify which meetings count as accepted and what happens to replies that are not ready to buy.

Check the work in use

Review why a prospect was selected and what was learned from the response. Count held, relevant conversations separately from contacts found, messages sent, or meetings booked.

Know when to change course

If the same objection appears repeatedly, adjust the offer or buyer group before increasing outreach. Respect a request to stop contact and keep the exclusion in the record.

These are discussion points, not a fixed package. GullySales confirms the deliverables, responsibilities, fee, and term in writing after reading your brief and speaking with you.

Before we start

What to have ready before the work starts.

The records, access and decisions this work needs from window, door and glass companies. Anything missing is noted in the written scope, with who will supply it.

The register of measured sites
Bring the list of sites measured, with outcome if known. A notebook is acceptable. It shows which enquiries were worth a visit. Without it, the new questions are written from general window buying and miss your own patterns.
The estimator's rule for when to quote
Write when an estimator will quote, when more information is needed and when the site should be declined. Only you can set this. Without it, the phone desk cannot filter, and surveyors keep going to every site.
A list of architects and designers you know
Name the practices you have worked with or met, with who at each practice chooses systems. The visit programme starts from them. Without a list, visits are planned cold, and the first conversations are slower.
Sample corner pieces ready to carry
Have a small set of corner sections and glass samples that a person can bring to a meeting. Specifiers ask to touch the profile. Without them, a visit relies on pictures, and the architect cannot compare your section with another.

How it works

How the lead generation work runs

The work itself, in order. How an engagement starts, from your brief to a written scope, is set out on our method page.

  1. 1

    Read the measured sites that never ordered

    We start with the register of sites measured over the last season and mark which became an advance and which did not. You tell us what you remember of each: the buyer type, the reason given, the rate gap. What exists afterwards is a picture of which enquiries cost a surveyor's visit and returned nothing.

  2. 2

    Write the questions asked before a visit is booked

    With the phone desk, we write the questions that must be answered before a surveyor goes: the number of openings, the floor, the wall, the material wanted, the kind of building and whether a society approval is needed. You decide which answers allow a visit. The questions are short enough to ask on one call.

  3. 3

    Set a quote owner for each measured site

    We agree with your estimator how a measurement becomes a quote, who sends it and when the first follow-up call happens. Each measured site then gets an owner and a date in the record. You decide who covers when the owner is away. A measured site that goes quiet is the first thing to check.

  4. 4

    Plan the visits to architects and designers

    We list the practices that have written your system into a drawing or asked for samples, and those you would like to meet. A short visit plan carries the sample corner, a section and photographs. You choose who goes. Referrals from these visits are recorded with the practice's name, since they arrive without a form.

  5. 5

    Compare the sources with the first record

    We set the sources of enquiries, measurements and advances beside the record of the last season, separating homes, builders and specifiers. You choose which routes to extend. No number of leads is promised. The reading shows whether fewer surveyors are being sent to sites that do not order.

Where this fits

Three pieces of sales work, in this order.

This work sits inside sales process design, at stage 1, prospecting and lead generation. The audit comes before it, and sales management keeps it running.

  1. Step 1

    Sales audit

    Find where deals are being lost and what to fix first.

    Start here if you cannot say where orders are lost.

  2. Step 2 · you are here

    Sales process design

    One written way to sell, from first enquiry to repeat order.

    Start here if every salesperson sells differently.

  3. Step 3

    Sales management

    A target, a review routine and someone who owns the number.

    Start here if the team has targets and no routine.

Tell us what you need Your brief is read before we call. Scope, fee and term in writing.

FAQ

Questions owners ask before they call.

Not here? More answers, or ask on WhatsApp.

How do we stop measuring sites that never order?
Ask how many openings, which floor and who decides before booking the visit. Then quote the next day. Most of these orders are not lost on price, they are lost in the week a quote sat waiting.
Which is better work, homeowners or architects?
Architect and builder projects are larger, slower and pay late. Homeowner work is smaller and comes with an advance. Most fabricators need both, with the specifier side built by visiting practices rather than by advertising.
An architect has written our system into a drawing. Is that a lead?
Yes, and log it with the project, the architect and the stage. Find out who the builder is and when it goes to tender, then contact the builder before the quotes arrive. A specification without a quote is an open door, not an order.
Are leads forwarded by a profile or hardware brand worth working?
They can be, if the lead is genuinely sent to you and not to several others. Tag the source, reply promptly, and judge by sites measured and advances taken. Check the brand's current rules before you rely on them.
What should a surveyor carry on a first visit?
A measuring tape and a laser if you use one, the sample corner and glass pieces, a printed sheet that explains the profile and the glass in plain words, and a form on which the opening details are written. The surveyor should also carry the quote comparison sheet, so the buyer can see what each line means. We check this kit with your estimator, because a visit without it ends with a promise to send details later.
How should we treat someone who wants a rate over the phone?
Explain that a window rate depends on the size, the material, the glass and the fitting, and offer to give a figure after a photograph and the opening sizes. Do not refuse to talk. A caller who gets nothing will ring the next maker. We write a short reply for the phone desk that asks for a photograph and the sizes, and sends a page explaining what moves the rate, then books a visit only when the details are in.
How much does it cost?
There is no price list, because the work differs by business. The fee is scoped after we have read your brief and spoken to you, and put in writing before anything starts, split into our time, your media spend and production.
How long is the contract?
The term is agreed in writing after we have spoken, along with the fee and the reporting. It is never a default twelve months, and renewal is decided on the numbers against the baseline recorded at the start.
How soon will we see results?
It depends on the trade, the channel and what is already in place. After we have read your brief and spoken to you, we say what we would expect to move first and how it will be measured against the baseline. Nothing here is guaranteed.
Who will actually do the work?
The person you speak to before anything starts. We work from one office in Nagarbhavi, Bengaluru, with no account managers in between.

Your next practical step

Tell us what you are trying to grow, and we will read it before we call.

Eight short steps, mostly taps. Skip anything you would rather answer on the call.