Skip to content
GullySales

Plywood and timber dealers · Lead generation

A photograph of the designer's material list is the enquiry.

Enquiries at a depot arrive as a carpenter asking for fourteen sheets, a photograph of a material list, or a builder wanting a rate on frames. GullySales puts counter, phone and WhatsApp enquiries into one log, sets the site questions that decide a quote, and dates every follow-up.

Scope, fee, reporting and term are agreed in writing after we have read your brief and spoken to you.

Realistic editorial illustration of plywood and timber dealers at work in India

What lead generation means

Lead generation is the combined work of every channel that brings in a new enquiry, whether from search, adverts, referrals or a stall at an exhibition. GullySales runs these channels together and reports the number of enquiries each one produced, not the activity behind it.

Plan the next part of the work

Last updated 21 Nov 2026.

For plywood and timber dealers

Where it usually goes wrong, and what we would do.

  • “The site decides the quote, not the sheet count”

    Which floor, is there a lift, when does the carpenter start. A fourth-floor walk-up changes both the price and the day.

  • “A rate given on WhatsApp disappears into the chat”

    Nobody can say what was quoted three weeks ago, so the depot either repeats itself or loses the order over ten rupees.

  • “The person asking is rarely the person paying”

    A carpenter collects rates for a client not yet named, and until you know whose flat it is you are quoting into the dark.

What we do

What we deliver for plywood and timber dealers.

The work available for this need. We agree the deliverables and responsibilities for your engagement in writing.

  1. One log for counter, phone and WhatsApp

    Every enquiry in a single list with the product, who asked, the site and the rate given, including messages to the owner's personal number.

    Result: An enquiry stops living inside somebody's chat.

  2. Site questions asked before the rate

    Locality, floor, lift, the date the carpenter starts and whether the client or the carpenter is paying, asked in that order.

    Result: The quote fits the job instead of guessing at it.

  3. A quote sent as a document, not a message

    A short file carrying the grade, brand, size, quantity, rate and how long the rate holds, sent instead of a typed figure.

    Result: Your rate is still readable next week.

  4. Follow-up dates on every timber quote

    A date in the calendar for each teak, frame and door quotation, with a call and a note of why it was won or lost.

    Result: Timber quotes stop vanishing for a month.

  5. The referrer recorded on every enquiry

    Which carpenter, designer, builder or neighbour sent this buyer, written down at first contact rather than remembered later.

    Result: You know who is actually sending work.

  6. Quotes against orders reported

    Enquiries by source, quotes given and orders confirmed by product, read against the figures from before the log existed.

    Result: You can see where the orders are leaking.

How the result is measured

  • Relevant enquiries by source
  • Duplicate and unsuitable enquiries
  • Time to the first response
  • Accepted enquiries reaching an agreed next step

Recorded as a baseline before work starts, so every later report has an honest comparison.

Where enquiries come from

A plywood depot is approached by carpenters, designers and contractors, and each should be logged with the list and the grade.

Carpenter at the counter
Write the carpenter's name, the customer being bought for and the site's area. Ask for the sheet list before the price, and note who pays the bill.
Interior designer's schedule
Log the designer, the project and the material list with grades and thickness. Quote from the list as a document, and record the date the designer decides.
Homeowner with a carpenter
Record both names and the work, such as wardrobes or a kitchen. Ask the homeowner what the carpenter has specified, and note which brand and grade was named.
Contractor asking for shuttering ply
Note the site, the quantity, the number of reuses expected and the delivery date. Ask for the credit terms in writing before the load leaves.
WhatsApp message with a photo of a sample
Ask for the brand mark, the thickness and the quantity. Reply with the matching grade and a note on how to check it, such as the ISI mark and the stamp on the sheet.
Builder or fit-out contractor tender
Log the project, the BOQ lines and the closing date. Check each line for the grade and the make, and keep an eye on timber prices before you commit a rate.

Who it is for

This is written for these plywood and timber dealers.

  • Authorised plywood and laminate distributors
  • Multi-brand plywood and hardware dealers
  • Timber merchants and saw mills
  • Imported timber and teak depots
  • Door, frame and flush door suppliers
  • Veneer and decorative surface showrooms
  • Shuttering ply and construction material suppliers
  • Block board, MDF and particle board dealers

Before you decide

When this may not be the right fit.

  • You have no one at the counter who writes the enquiry down, so photographs of material lists would sit in a phone and be lost.
  • Your stock is limited and sold before it reaches the shelf, so more enquiries would only mean more refusals.
  • Carpenters already send you every client and you cannot serve more, so a lead programme would add noise to a full counter.

Before you decide

Agree the work. Know how to judge it.

Lead generation for plywood and timber dealers: use these checks to prepare, choose the scope, and review what changes.

Bring the right evidence

Define the organisations or buyers you can serve and the reasons they would consider a conversation. Bring examples of accepted and rejected prospects so the selection rule is visible.

Make the scope clear

Agree the research sources, contact approach, qualification rules, and handover. Clarify which meetings count as accepted and what happens to replies that are not ready to buy.

Check the work in use

Review why a prospect was selected and what was learned from the response. Count held, relevant conversations separately from contacts found, messages sent, or meetings booked.

Know when to change course

If the same objection appears repeatedly, adjust the offer or buyer group before increasing outreach. Respect a request to stop contact and keep the exclusion in the record.

These are discussion points, not a fixed package. GullySales confirms the deliverables, responsibilities, fee, and term in writing after reading your brief and speaking with you.

Before we start

What to have ready before the work starts.

The records, access and decisions this work needs from plywood and timber dealers. Anything missing is noted in the written scope, with who will supply it.

Two weeks of old quote slips
Gather the carbon copies, notebook entries or phone notes of quotes given. They can be untidy. We use them to see how enquiries are recorded today. Without them, the new log is built on guesses about your habits and your counter staff may find the columns do not fit how they work.
The WhatsApp number used for rates
Tell us which phone or number carpenters message for rates and who holds it. We need to know if it is personal or the depot's. If it belongs to one salesperson, the enquiries leave with them, and the plan must first move the number to the depot.
A list of your regular referrers
Write down the carpenters, designers and site supervisors who send you work, even from memory. Names and trades are enough. Without the list we cannot record the referrer on each enquiry, and you cannot later see who deserves a thank-you and who only collects rates.
Your credit rules for new buyers
Tell us who may buy on credit and who pays at delivery. A few lines will do. When the rule is unclear, a quote goes out to a builder whose account you would later refuse, and the counter loses face when the credit is declined.

How it works

How the lead generation work runs

The work itself, in order. How an engagement starts, from your brief to a written scope, is set out on our method page.

  1. 1

    Collect a fortnight of enquiries in one place

    We ask your counter staff to hand over the slips, the phone notes and screenshots of the WhatsApp chats where rates were asked. We lay them side by side with you. Seeing the same carpenter asking at the counter and on the phone shows how many enquiries you really have, and which ones were never written down.

  2. 2

    Write the site questions with the owner

    A quote depends on the site: the floor, the stage of work, who will pay, and the date material is needed. With you we choose the few questions that must be asked before any rate is spoken. You decide which question your counter staff will find awkward, and we reword it until they would say it aloud.

  3. 3

    Decide where the single log lives

    You choose between a shared sheet, a register at the counter or a simple tool. We set up the columns: who asked, who referred them, the product, the site, the quote number. Whoever answers the phone or the chat enters the line the same hour, and you see one list.

  4. 4

    Send a test enquiry through every door

    We put a test enquiry through the counter, the phone and the WhatsApp number, as a carpenter would. You watch how each reaches the log and who is told. Anything that falls between two staff members is mended now, before real buyers arrive and a quote for a builder's slab is lost in the chat.

  5. 5

    Match quotes sent against orders booked

    Using the log and your billing book, we count the quotes sent and the orders that followed, by product and by referrer. You mark the lost ones with a reason. The figures are compared with the counts taken before the log began, and you decide which referrers and which sources deserve more of your time.

Where this fits

Three pieces of sales work, in this order.

This work sits inside sales process design, at stage 1, prospecting and lead generation. The audit comes before it, and sales management keeps it running.

  1. Step 1

    Sales audit

    Find where deals are being lost and what to fix first.

    Start here if you cannot say where orders are lost.

  2. Step 2 · you are here

    Sales process design

    One written way to sell, from first enquiry to repeat order.

    Start here if every salesperson sells differently.

  3. Step 3

    Sales management

    A target, a review routine and someone who owns the number.

    Start here if the team has targets and no routine.

Tell us what you need Your brief is read before we call. Scope, fee and term in writing.

FAQ

Questions owners ask before they call.

Not here? More answers, or ask on WhatsApp.

A carpenter asks for rates ten times and buys once. Is that carpenter worth logging?
Yes, because the log is what shows you that pattern. A carpenter collecting rates for other depots looks the same as a busy one until somebody counts. After a season the list tells you which is which.
Should we quote on WhatsApp at all?
Quote on WhatsApp, but send it as a document with the grade, the size and a validity on it. A typed number gets forgotten, argued over and undercut. A sheet with your name on it survives the conversation.
A customer wants us to hold stock at today's rate while they decide. What do we record?
Record the items, the rate, the date the rate holds until and who asked for it. Put the validity in writing. Timber and plywood prices move, so an open-ended hold becomes a dispute. If the date passes, say the rate has lapsed.
A carpenter brings the customer's list. Whose enquiry is it?
Both. Record the customer as the buyer and the carpenter as the source. Ask the customer what they have agreed with the carpenter. If the carpenter is a regular, credit the carpenter in your book, but do not quote past them to the customer.
Do we log a walk-in who just asks a rate and leaves?
Yes, but briefly. A line with the product, the thickness, the area and whether the person was a carpenter or an owner takes seconds. These short lines show which products draw interest and which hours are busy, and a second visit from the same person can be linked to the first. We do not ask staff to chase them. The log is for seeing patterns and for deciding who gets a follow-up call, not for adding to the workload of the counter. If a rate-only visitor comes back with a site, the earlier line shows how long they took to decide.
Can staff write enquiries in a notebook instead of a tool?
They can, if the notebook is the single place and the columns are fixed. A tool helps with reminders and reports, but a notebook that everyone fills the same way beats a tool that half the counter ignores. We would start where your staff are comfortable and move to a tool only if the volume of quotes makes the notebook hard to read. Whichever you choose, the rule is the same: nothing is quoted before it is written in the log, and the quote number is on the slip handed to the buyer.
How much does it cost?
There is no price list, because the work differs by business. The fee is scoped after we have read your brief and spoken to you, and put in writing before anything starts, split into our time, your media spend and production.
How long is the contract?
The term is agreed in writing after we have spoken, along with the fee and the reporting. It is never a default twelve months, and renewal is decided on the numbers against the baseline recorded at the start.
How soon will we see results?
It depends on the trade, the channel and what is already in place. After we have read your brief and spoken to you, we say what we would expect to move first and how it will be measured against the baseline. Nothing here is guaranteed.
Who will actually do the work?
The person you speak to before anything starts. We work from one office in Nagarbhavi, Bengaluru, with no account managers in between.

Your next practical step

Tell us what you are trying to grow, and we will read it before we call.

Eight short steps, mostly taps. Skip anything you would rather answer on the call.