Skip to content
GullySales

Vending machine operators · Follow up systems

The site decides after the visit, so the next contact has to be a routine.

A follow-up system for a vending machine operator is a set routine for contacting sites after a visit, a trial or a proposal. GullySales works out who calls which site, what is said and how the next contact is logged.

Scope, fee, reporting and term are agreed in writing after we have read your brief and spoken to you.

Editorial illustration for Lead response and follow-up

What follow up systems means

A follow-up system is the set routine for calling, messaging or emailing an enquiry more than once, since most buyers do not decide on the first conversation. GullySales sets the number and timing of follow-ups so an undecided buyer keeps hearing from you until they decide either way.

Last updated 14 Nov 2026.

For vending machine operators

Where it usually goes wrong, and what we would do.

  • “A proposal is sent and silence is taken as no”

    The facility manager forwarded it to finance, and nobody asked how it went.

  • “A trial machine runs with no check-in”

    The site has its own opinion of the trial by the second week, and the operator hears it at the end.

  • “A machine fault is fixed and not closed with the site”

    The site never learns the cause or the change, and the next fault lands on a cold relationship.

  • “Renewals are chased after the date”

    The agreement runs out and the operator learns of it from the competitor's visit.

What we do

What we deliver for vending machine operators.

The work available for this need. We agree the deliverables and responsibilities for your engagement in writing.

  1. A proposal follow-up script

    A call or message that asks who else reads the proposal and offers a site visit.

    Result: A script saved for every salesperson.

  2. A trial check-in routine

    A set of questions for the site after the machine is installed: usage, complaints and what to adjust.

    Result: A check-in record for each trial.

  3. A fault close-out message

    A short note to the site after a repair that states the cause and the change made.

    Result: A message template and a log.

  4. A renewal reminder rule

    A date in the register that triggers a call before the agreement ends.

    Result: A list of renewals due, sorted by date.

  5. A not-now list

    A record of sites that said later, with the date to reconnect.

    Result: A list that stops lost sites being forgotten.

How the result is measured

  • Follow-up completion rate
  • Average number of follow-ups before close
  • Enquiries closed after repeat follow-up

Recorded as a baseline before work starts, so every later report has an honest comparison.

What to capture or send

The moments after a site contact that need a message, and what each carries.

Proposal sent, no reply
Ask who else needs to read it and offer a visit. Record the name and the next date.
Trial machine installed
Check in after the first few days of use. Record complaints and what was changed.
Fault reported and cleared
Send a short note with the cause and the fix. Record the time taken.
Agreement nearing its end
Call the decision-maker, review the machine record and ask what the site wants changed.
Site said not now
Record the reason and the month to return. Send a short note when stock or terms change.

Who it is for

This is written for these vending machine operators.

  • Tea and coffee premix machine operators for offices
  • Bean-to-cup coffee machine suppliers for corporate floors
  • Snack and beverage spiral machine operators
  • Packaged drinking water and RO dispenser vending
  • Machines in hospitals and diagnostic centres
  • College, school and hostel vending operators
  • Factory canteen and shop-floor tea and coffee machine suppliers
  • Metro, bus station and mall kiosk vending

Before you decide

When this may not be the right fit.

  • No one is named to make the follow-up calls, so a script would sit unused.
  • You are tempted to chase a site that has said no twice, which only harms your name in the park.

Before you decide

Agree the work. Know how to judge it.

Follow-up systems for vending machine operators: use these checks to prepare, choose the scope, and review what changes.

Bring the right evidence

Trace recent enquiries from arrival to the last recorded action. Include a won enquiry, an unsuitable one, and one that went quiet, with personal details removed for the initial discussion.

Make the scope clear

Agree who accepts each enquiry, what makes it qualified, and how ownership changes. Include a rule for missed replies and a clear reason for closing an enquiry.

Check the work in use

Pick an enquiry at random and ask the team to find its owner, latest conversation, and next action. Check that the record agrees with what actually happened.

Know when to change course

If no one has capacity to respond, assign that responsibility before buying more leads. Automation can support the owner, but it cannot replace an unresolved handover.

These are discussion points, not a fixed package. GullySales confirms the deliverables, responsibilities, fee, and term in writing after reading your brief and speaking with you.

Before we start

What to have ready before the work starts.

The records, access and decisions this work needs from vending machine operators. Anything missing is noted in the written scope, with who will supply it.

The list of unanswered proposals
Every proposal or trial that has gone quiet, with the site, the receiver and the last contact. It is the working material for the first calls. If it is incomplete, we start with what exists and add to it, but we say plainly that earlier silences may remain hidden.
A named caller for each site
The person on your side who will phone or message each site: owner, supervisor or office staff. A follow-up with no owner does not happen. If one person cannot manage all sites, split them by zone, and write the split down so that two people do not contact the same facility manager.
A record of trial machines in place
Which machines are on trial at which site, and since when, taken from your godown book. The check-in routine depends on it. Without the record, a trial can run on with no one asking how it is going, and the site's silence is mistaken for satisfaction.
The fault log or the technician's notes
Whatever record shows which machines failed and were repaired. The close-out message is written from it. Where the technician keeps no notes, we ask for a few lines after each repair, and the message begins by using those lines instead of a general apology.
Your own decision on how to hear a no
A short statement of which refusals you accept at once, and which you revisit later. A not-now list is only useful if you will really return to it. We help write the rule, but only you can decide whether a lost site is worth another approach.

How it works

How the follow up systems work runs

The work itself, in order. How an engagement starts, from your brief to a written scope, is set out on our method page.

  1. 1

    List every proposal sent and not answered

    We start by listing each proposal and trial that has gone quiet, with the site, the person who received it and the last contact. You mark which of them you would still want. This list is the first real use of the system, and it exposes a proposal that was never received because it went to a retired email address: the calls we script are tried on these, and it shows how many silences were never followed up.

  2. 2

    Write the call that follows a proposal

    We write a short script for the call after a proposal is sent. It asks whether the facility manager received it, who else will read it and what question they need answered. It also asks whether the proposal needs to go to accounts or a director, because a proposal that sits in one inbox cannot be approved by someone who never saw it. You say it aloud in your own voice and we adjust the words. A script that sounds unlike you will not be used when the phone rings.

  3. 3

    Set the check-in during a trial placement

    A trial machine at a site needs someone to ask how it is going before the site decides. We write a short check-in for the supervisor to make, with the three things to look at: cleanliness, stock and any complaint from staff. You decide who carries it out, and the findings go to the register. If the supervisor finds the machine unused because it sits in a corridor few people pass, the note says so, and the conversation with the site turns to moving it and not to ending the trial.

  4. 4

    Write the message that closes a fault

    When a breakdown is fixed, the site should hear that it is fixed and what was done. We write the short message the technician or supervisor sends, with a place to note the site's reply. You approve the wording. A close-out also names the cause when it is known, such as a jammed coin mechanism or a power trip, so the facility manager can tell a fault in the machine from a fault in the site's wiring. This turns every repair into a small proof that your service works, rather than a silence.

  5. 5

    Set the renewal reminder against agreement dates

    Using the agreement dates in your register, we agree a point before each renewal at which your team contacts the site, and what is said. We name the person responsible for each. You decide how the reminders are carried, in a sheet or on a phone, and we make sure each has an owner. The reminder also asks the site contact whether anything has changed, such as a new pantry, more staff or a rival operator, so the renewal conversation starts from the present.

  6. 6

    Keep a not-now list and read the outcomes

    Sites that decline are written on a not-now list with a reason and a point to try again. We then compare how many proposals produced an answer against the list we began with. You decide which scripts to keep. We do not promise that every site will respond or that no refusals will come.

Where this fits

Three pieces of sales work, in this order.

This work sits inside sales process design, at stage 2, qualification. The audit comes before it, and sales management keeps it running.

  1. Step 1

    Sales audit

    Find where deals are being lost and what to fix first.

    Start here if you cannot say where orders are lost.

  2. Step 2 · you are here

    Sales process design

    One written way to sell, from first enquiry to repeat order.

    Start here if every salesperson sells differently.

  3. Step 3

    Sales management

    A target, a review routine and someone who owns the number.

    Start here if the team has targets and no routine.

Tell us what you need Your brief is read before we call. Scope, fee and term in writing.

FAQ

Questions owners ask before they call.

Not here? More answers, or ask on WhatsApp.

When do follow-ups become too much?
Stop when the site gives a clear no or asks to be left alone. A reply with a reason gives you a date to return, and a second ask after that is enough.
Who should make the calls?
The person who visited the site, so the facility manager hears a familiar voice. Record the call so a colleague can continue.
Can we use WhatsApp for follow-up?
Yes, with a site contact who already messages you. Send a short message and record it. Do not add anyone to a group without asking.
What do we do with a no?
Record the reason, thank the contact and set a date to check again if the reason may change, such as a vendor contract ending.
When does a follow-up turn into a nuisance?
It turns into a nuisance when it asks the same question twice and adds nothing. Each contact in the system carries a new point: a clarification, a photograph, a fault fixed or a question about the next step. If the site has said no, the contact stops and the site goes on the not-now list. GullySales writes the scripts so that every call has a reason a facility manager would recognise.
Who should phone the sites, the owner or a supervisor?
The person the facility manager already knows. For a new proposal that is the owner, because the decision concerns terms. For a trial check-in or a fault close-out it is the supervisor, who knows the machine. We write the split down for each site in the register, so that a site hears from one familiar voice and not from three different numbers.
How much does it cost?
There is no price list, because the work differs by business. The fee is scoped after we have read your brief and spoken to you, and put in writing before anything starts, split into our time, your media spend and production.
How long is the contract?
The term is agreed in writing after we have spoken, along with the fee and the reporting. It is never a default twelve months, and renewal is decided on the numbers against the baseline recorded at the start.
How soon will we see results?
It depends on the trade, the channel and what is already in place. After we have read your brief and spoken to you, we say what we would expect to move first and how it will be measured against the baseline. Nothing here is guaranteed.
Who will actually do the work?
The person you speak to before anything starts. We work from one office in Nagarbhavi, Bengaluru, with no account managers in between.

Your next practical step

Tell us what you are trying to grow, and we will read it before we call.

Eight short steps, mostly taps. Skip anything you would rather answer on the call.