Skip to content
GullySales

Commercial vehicle repair workshops · Lead generation

A breakdown call is one lead, and a fleet that stays is a different one.

Lead generation for a commercial vehicle workshop means getting two kinds of call: the driver stuck at the roadside who needs a tow and a mechanic, and the fleet manager who is choosing a yard for the next year. GullySales works on the sources, the replies and the records behind both.

Scope, fee, reporting and term are agreed in writing after we have read your brief and spoken to you.

Mechanics inspecting a vehicle engine in a repair workshop

What lead generation means

Lead generation is the combined work of every channel that brings in a new enquiry, whether from search, adverts, referrals or a stall at an exhibition. GullySales runs these channels together and reports the number of enquiries each one produced, not the activity behind it.

Plan the next part of the work

Last updated 21 Nov 2026.

For commercial vehicle repair workshops

Where it usually goes wrong, and what we would do.

  • “The roadside call is won by whoever is findable and answers”

    A driver with a failed clutch rings the owner, and the owner asks around. The workshop on the highway search, with a number that is picked up and a road name that matches, is the one named in that chain of calls.

  • “Dispatchers and supervisors decide, not the driver”

    The driver describes the fault, but the dispatcher or the fleet supervisor picks the workshop. Your name must reach that desk before the breakdown happens, through a card, a message or a site visit.

  • “Fleet leads come through trust and a trial”

    A fleet manager does not move trucks to a new yard on a brochure. They send one or two trucks, watch the estimate, the work and the invoice, and then decide. The lead is the trial, so the trial has to be easy to ask for.

  • “Parts dealers, tyre shops and toll-side dhabas hear first”

    The people who see a stranded truck before anyone are the parts counter and the roadside tea stall. A short list of those contacts, kept warm, sends breakdown calls your way without any advertising spend.

What we do

What we deliver for commercial vehicle repair workshops.

The work available for this need. We agree the deliverables and responsibilities for your engagement in writing.

  1. A source record for every job

    Each job logged as search, Maps, dispatcher, referral, parts dealer or repeat customer, taken from your job card book.

    Result: You can see which source fills the yard.

  2. A breakdown page with the number and the road

    A page and a listing that give the highway stretch you cover, the night hours, the tow arrangement and the number that is answered.

    Result: A driver can act on the first screen.

  3. A fleet trial offer

    A written offer to take a trial set of trucks with a fixed estimate format and an invoice the accounts desk can pass.

    Result: A fleet manager has a safe way to try you.

  4. A contact list of dispatchers and parts dealers

    A named list of the desks and counters that send trucks your way, with the date of the last conversation.

    Result: Referrals have a person behind them.

  5. A message for transport associations

    A short introduction for truck owners' associations and bus operators, sent through the people who run them.

    Result: Associations know what the workshop handles.

How the result is measured

  • Relevant enquiries by source
  • Duplicate and unsuitable enquiries
  • Time to the first response
  • Accepted enquiries reaching an agreed next step

Recorded as a baseline before work starts, so every later report has an honest comparison.

What to capture or send

What to record when a driver or a fleet owner makes contact about a truck.

Vehicle make, model and registration
Note them at the first call. A tipper and a bus need different bays and different parts, and the registration ties the truck to its history.
Fault as the driver describes it
Write the symptom in the driver's words, such as a clutch that slips on load. It guides the mechanic before the truck arrives.
Location on the road and landmark
Capture the highway, the nearest toll and a landmark. A tow or a mobile unit cannot be sent to a vague place.
Who pays and who authorises
Ask whether the driver, the owner or the fleet office approves the work. An estimate sent to the wrong person stalls the repair.
How they found the workshop
Note whether it was Maps, a parts dealer, another driver or a painted sign, to see which source brings fleets and which brings one-off breakdowns.

Who it is for

This is written for these commercial vehicle repair workshops.

  • Heavy truck and trailer repair workshops
  • Bus and school bus repair workshops
  • Tipper and construction vehicle repair
  • Light commercial vehicle and pickup service centres
  • Authorised and multi-brand commercial vehicle service points
  • Roadside breakdown and mobile mechanic units
  • Tyre, brake and clutch specialist workshops for fleets
  • Annual maintenance contract workshops for company fleets

Before you decide

When this may not be the right fit.

  • Your yard is full for the foreseeable stretch and cannot take another truck, so more calls would be turned away.
  • No one is at the phone when a driver rings, and a lead that reaches voicemail goes to the next workshop.

Before you decide

Agree the work. Know how to judge it.

Lead generation for commercial vehicle workshops: use these checks to prepare, choose the scope, and review what changes.

Bring the right evidence

Define the organisations or buyers you can serve and the reasons they would consider a conversation. Bring examples of accepted and rejected prospects so the selection rule is visible.

Make the scope clear

Agree the research sources, contact approach, qualification rules, and handover. Clarify which meetings count as accepted and what happens to replies that are not ready to buy.

Check the work in use

Review why a prospect was selected and what was learned from the response. Count held, relevant conversations separately from contacts found, messages sent, or meetings booked.

Know when to change course

If the same objection appears repeatedly, adjust the offer or buyer group before increasing outreach. Respect a request to stop contact and keep the exclusion in the record.

These are discussion points, not a fixed package. GullySales confirms the deliverables, responsibilities, fee, and term in writing after reading your brief and speaking with you.

Before we start

What to have ready before the work starts.

The records, access and decisions this work needs from commercial vehicle repair workshops. Anything missing is noted in the written scope, with who will supply it.

Last year's job cards and invoice book
We need them to see where trucks came from and which jobs paid for the bay time. Photographs of the pages are acceptable if the handwriting can be read. Without them we plan from memory of the year, which favours the loud jobs over the profitable ones and skews every choice that follows.
The list of bays, lifts and mechanics
This tells us how many trucks the yard can hold and repair at one time, and which jobs need a particular mechanic. A rough sheet in your own hand is fine. When it is missing we cannot judge how many calls to invite, and the first busy week may overload the team.
A named person to answer the calls
Someone must pick up the breakdown number and the fleet line in the hours you promise. That may be you, a supervisor or a clerk. If nobody is named, calls from drivers go unanswered, the sources we open are wasted and the plan falls back to a single quiet route.
Two or three fleet owners we may ring
We ask permission to speak to a few transporters who already use the yard, so we learn why they first came and why they stayed. Their consent matters more than the size of their fleet. Without them the fleet trial offer is written from guesses about what a transporter wants.
Your decision on the roadside radius
Only you can say how far from the yard a mechanic will travel, on which highways and at what hours. The answer fixes where the breakdown page points and which calls the reply script accepts. If the radius is undecided, the page may invite calls you cannot answer.

How it works

How the lead generation work runs

The work itself, in order. How an engagement starts, from your brief to a written scope, is set out on our method page.

  1. 1

    Sort last year's job cards by origin

    We sit with your job cards and invoice book and mark how each truck reached the yard: a roadside call, a driver's word, a dealer referral or a fleet that rang direct. You tell us which jobs were worth the bay time and which only blocked a lift. That marked pile becomes the record we measure against.

  2. 2

    Decide breakdown or fleet work first

    You choose whether the next push is for roadside jobs, scheduled service or standing fleet accounts. We ask how many bays and mechanics are free when two trucks arrive together, because a source that fills the yard beyond that point harms your name with the transporters already waiting for their turn.

  3. 3

    Write the first reply for a stuck driver

    We draft the answer for a driver calling from a highway: make, fault, exact location and whether a mechanic can come out. You read it aloud and strike anything you would not say. A second reply is written for a fleet manager asking about a trial, with different questions and a calmer tone.

  4. 4

    List the parts dealers and tyre shops

    You name the spares dealers, tyre shops and toll-side eateries whose staff hear of breakdowns before anyone else. We prepare a short note for each and a simple way for them to pass your number on. You decide whose referrals earn a thank-you and who is only told that you are open.

  5. 5

    Place a test call through every route

    We ring the listing, send a message through the breakdown page and fill in the trial form, then watch who answers and what reaches the source record. Any route that arrives without its source named is mended before a real driver relies on it, because a call lost on a highway is not recovered.

  6. 6

    Read the source record against the old pile

    Once jobs come in, we set the source record beside the marked job cards from the first step: calls taken, trucks received, trials run and contract jobs, by route. You decide which route deserves more of your attention and which is paused. The comparison shows what each route brought; it does not forecast a count.

Where this fits

Three pieces of sales work, in this order.

This work sits inside sales process design, at stage 1, prospecting and lead generation. The audit comes before it, and sales management keeps it running.

  1. Step 1

    Sales audit

    Find where deals are being lost and what to fix first.

    Start here if you cannot say where orders are lost.

  2. Step 2 · you are here

    Sales process design

    One written way to sell, from first enquiry to repeat order.

    Start here if every salesperson sells differently.

  3. Step 3

    Sales management

    A target, a review routine and someone who owns the number.

    Start here if the team has targets and no routine.

Tell us what you need Your brief is read before we call. Scope, fee and term in writing.

FAQ

Questions owners ask before they call.

Not here? More answers, or ask on WhatsApp.

Should we advertise on highway hoardings or online?
Test both against the jobs you record. Hoardings reach drivers who pass, while search reaches owners and dispatchers who plan. Your job card book shows which brought trucks, and we read it before we suggest where to spend.
How do we get fleet owners and not just one-off breakdowns?
Treat the first breakdown as a trial. Send a clear estimate, keep the truck's record and message the owner when the next service falls due. Fleets stay with the yard that remembers each truck.
Can we promise a quick repair in our advertising?
Only if your own records back the claim. A repair depends on the part, the fault and the queue. Give a date after the estimate and keep it, and do not advertise a speed you cannot hold.
Is a roadside breakdown call the same as a fleet lead?
No. A breakdown is a single job won by whoever answers and is nearby. A fleet lead is a standing arrangement won by trust over several jobs. Record each differently and follow only the fleet lead beyond the first repair.
Who answers the breakdown calls once lead generation starts?
Your own team answers them, since a driver stuck on a highway wants a person who knows the yard. We write the reply script, set the number on the listing and the page, and test it, but we do not take calls for you. If nobody is free at night, we advise which calls to route to a supervisor's phone and which to leave to a message. The decision on night cover and on which mechanic goes out stays with you. Our part is making sure each call arrives with its make, fault and place written down.
What happens to the dealers and shops who already send us trucks?
They stay yours, and we do not contact them without your say. We list them first, because the spares dealers and tyre shops who already pass your number are the best proof that the yard is trusted. You decide how each is thanked and whether a printed card or a short message goes to them. A new route should never replace an existing one that works. If a dealer is also friendly with a rival workshop, tell us and we leave that name out of any outreach, so no relationship is put at risk.
How much does it cost?
There is no price list, because the work differs by business. The fee is scoped after we have read your brief and spoken to you, and put in writing before anything starts, split into our time, your media spend and production.
How long is the contract?
The term is agreed in writing after we have spoken, along with the fee and the reporting. It is never a default twelve months, and renewal is decided on the numbers against the baseline recorded at the start.
How soon will we see results?
It depends on the trade, the channel and what is already in place. After we have read your brief and spoken to you, we say what we would expect to move first and how it will be measured against the baseline. Nothing here is guaranteed.
Who will actually do the work?
The person you speak to before anything starts. We work from one office in Nagarbhavi, Bengaluru, with no account managers in between.

Your next practical step

Tell us what you are trying to grow, and we will read it before we call.

Eight short steps, mostly taps. Skip anything you would rather answer on the call.