Skip to content
GullySales

Construction vehicle dealerships · Follow up systems

Make sure the quotation sent in March is still being chased in June.

A follow-up system for a construction vehicle dealership is the written routine that decides who calls which contractor, about which quotation, and when. GullySales works on that routine, the messages inside it and the check that it is being followed.

Scope, fee, reporting and term are agreed in writing after we have read your brief and spoken to you.

Staff inspect heavy construction equipment at a work site

What follow up systems means

A follow-up system is the set routine for calling, messaging or emailing an enquiry more than once, since most buyers do not decide on the first conversation. GullySales sets the number and timing of follow-ups so an undecided buyer keeps hearing from you until they decide either way.

Last updated 14 Nov 2026.

For construction vehicle dealerships

Where it usually goes wrong, and what we would do.

  • “Machine buying is slow, and silence is not a no”

    A contractor waits for a payment from the client, a sanction from the financier or the start of the season. Silence means the machine is not yet bought, and the dealer who stays in touch politely is the one called.

  • “The first reply sets the pace”

    An enquiry answered the same day with specification, photographs and a service contact moves forward. One answered late with a price alone makes the contractor ask elsewhere and compare three quotations.

  • “Follow-up needs a reason to call”

    Ringing to ask whether a decision has been made irritates the buyer. A reason, such as a revised price, a new unit arrived, a demonstration date or a finance document needed, gives the call value.

  • “Hire customers who keep renting are ready to buy”

    A contractor hiring the same machine repeatedly is paying for ownership without owning. A call with a worked comparison and finance options is the right follow-up, and it needs a reminder to happen.

What we do

What we deliver for construction vehicle dealerships.

The work available for this need. We agree the deliverables and responsibilities for your engagement in writing.

  1. Follow-up steps for each stage

    A written list of what happens after an enquiry, a quotation, a site visit and a demonstration, with an owner for each.

    Result: Each stage in the register has a named next action.

  2. Message set for WhatsApp and calls

    Short, ready-to-adapt messages for first reply, quotation sent, revised price and finance document needed.

    Result: The team sends consistent, courteous messages.

  3. Reminder routine tied to the register

    A way of showing each day which contractors are due a call, from the register or CRM.

    Result: The sales team opens one list each morning.

  4. Repeat-hirer and past-buyer calls

    A list of hire customers and earlier buyers with a reason to call, such as a service check or a new model.

    Result: Old customers are called before the next season opens.

  5. Review of stuck quotations

    A look by the owner at open quotations with no activity, deciding to chase, revise or close each one.

    Result: No quotation sits open without a decision.

How the result is measured

  • Follow-up completion rate
  • Average number of follow-ups before close
  • Enquiries closed after repeat follow-up

Recorded as a baseline before work starts, so every later report has an honest comparison.

What to capture or send

Each follow-up needs a reason to call and a record of what was said.

Quotation sent, no reply
Send the machine's specification and a photograph again with one question: has the work order date moved? Record the answer.
Contractor waiting on a bank loan
Ask which paper the bank wants, and offer a copy of the proforma. Note the bank's name and the date the answer is expected.
Used unit shown but not booked
Message the hour reading and any change in the unit's condition. Note whether the buyer brought a mechanic to see it.
Hirer on a long hire
Record when the hire ends and what the hirer plans next. A call before that date opens a purchase talk.
Machine delivered to site
Ask on the day whether the operator has what they need, and note the first service date the contractor agrees to.

Who it is for

This is written for these construction vehicle dealerships.

  • Authorised excavator and loader dealers
  • Backhoe loader and compactor dealers
  • Crane and concrete equipment dealers
  • Pre-owned construction machinery dealers
  • Road building and paving machine dealers
  • Mini excavator and compact equipment dealers
  • Equipment rental firms that also sell machines
  • Machinery brokers who sell between contractors

Before you decide

When this may not be the right fit.

  • Nobody keeps the register current, so reminders would fire on enquiries that were already closed or lost.
  • The yard has no stock details to refresh a quotation, which leaves nothing new to say on the second call.
  • Your contractors dislike calls during site hours and you have no other route such as a business message, so follow-up would reach nobody.

Before you decide

Agree the work. Know how to judge it.

Follow-up systems for construction vehicle dealerships: use these checks to prepare, choose the scope, and review what changes.

Bring the right evidence

Trace recent enquiries from arrival to the last recorded action. Include a won enquiry, an unsuitable one, and one that went quiet, with personal details removed for the initial discussion.

Make the scope clear

Agree who accepts each enquiry, what makes it qualified, and how ownership changes. Include a rule for missed replies and a clear reason for closing an enquiry.

Check the work in use

Pick an enquiry at random and ask the team to find its owner, latest conversation, and next action. Check that the record agrees with what actually happened.

Know when to change course

If no one has capacity to respond, assign that responsibility before buying more leads. Automation can support the owner, but it cannot replace an unresolved handover.

These are discussion points, not a fixed package. GullySales confirms the deliverables, responsibilities, fee, and term in writing after reading your brief and speaking with you.

Before we start

What to have ready before the work starts.

The records, access and decisions this work needs from construction vehicle dealerships. Anything missing is noted in the written scope, with who will supply it.

All open quotations in one list
We need every quotation your people hold, even rough. Bring phone screenshots and the quotation book. A quotation missing from the list will not be followed up, so ask each person to check their own phone.
A rule for who owns a buyer
Decide who follows up with a buyer when more than one person has spoken to them. Write the rule and share it. Without it, two people call the same contractor or nobody does.
Past buyers and repeat hirers list
Hire customers who keep renting are ready to buy, and past buyers may need another machine. Bring invoices that name them. Without a list, these calls are left out of the first round.
Finance options you can mention
A reason to call can be a finance route. Bring the options you refer to, in plain terms, and say who handles them. Without them, calls rely on machine and demonstration reasons only.
Time set aside to review stuck quotations
Reviews happen only if the sales head makes room. Agree who attends and who decides to close a quotation. Without it, stuck quotations stay open and the register fills with dead entries.

How it works

How the follow up systems work runs

The work itself, in order. How an engagement starts, from your brief to a written scope, is set out on our method page.

  1. 1

    Pull every open quotation out of the phones

    We begin by gathering the quotations your people have sent from their phones, books and emails into one list, with machine, value and last contact beside each. You and your sales head sit with us. Quotations turn out to have no owner or no next call, and that list is both the starting record and the first round of calls.

  2. 2

    Mark where a heavy-machine sale goes quiet

    With your sales head we mark where silence appears: after the quotation, after the yard visit, in the finance review, after a demonstration. You say which stages have an owner today. A buyer who is quiet is waiting for a bank or a project, not saying no, so the routine gives each stage a reason to call.

  3. 3

    Write the reason for each call

    A call needs something to say. For each stage we write a reason: a new unit that suits the job, a finance option you can refer to, a demonstration slot, a service reminder. You rewrite them in your voice. Staff keep the list beside the register, so no call is a bare check on whether the buyer has decided.

  4. 4

    Draft the messages and the replies to a no

    We draft chat messages and call openers for each stage, and replies for a buyer who has bought elsewhere, thanking them and leaving the door open. You approve the wording. We also write the call to a hire customer who keeps renting, pointing out the option to buy.

  5. 5

    Run the routine and review the stuck list

    The team follows the routine on current quotations and records each contact in the register. You and we review the stuck quotations together and decide which to close, which to escalate to the owner and which scripts to change. We compare sales and hires with the opening list.

  6. 6

    Read the register against the starting list

    We compare quotations won, lost and stalled, and the calls to past buyers and hirers, with the opening list. You see which stage lost buyers and which reason for loss repeats. You decide where to add a second owner or change the reason to call.

Where this fits

Three pieces of sales work, in this order.

This work sits inside sales process design, at stage 2, qualification. The audit comes before it, and sales management keeps it running.

  1. Step 1

    Sales audit

    Find where deals are being lost and what to fix first.

    Start here if you cannot say where orders are lost.

  2. Step 2 · you are here

    Sales process design

    One written way to sell, from first enquiry to repeat order.

    Start here if every salesperson sells differently.

  3. Step 3

    Sales management

    A target, a review routine and someone who owns the number.

    Start here if the team has targets and no routine.

Tell us what you need Your brief is read before we call. Scope, fee and term in writing.

FAQ

Questions owners ask before they call.

Not here? More answers, or ask on WhatsApp.

How do we decide the gap between follow-ups?
There is no fixed rule for machines. Agree a rhythm with the owner by stage, and always give a reason to call rather than asking whether a decision has been made.
Is automated follow-up suitable for heavy machinery?
For reminders and standard messages, yes. The call itself should be human, as buyers want a person who knows the machine.
What do we say when a contractor has bought elsewhere?
Thank them, ask what decided it, record the reason and stay in touch. Their next machine or hire need may come to you.
Should we follow up after the contractor buys elsewhere?
Yes, once and politely. Ask which machine was bought and what decided it, then record the reason lost. A contractor who bought from another yard may need a second machine or spares, and a respectful call keeps the yard in mind for that work.
How do we stop follow-up from feeling like pressure?
Give every call a useful reason: new stock that fits the job, a finance route, a demonstration, a reminder that a price quoted is about to change. Ask a question that helps the buyer decide, and accept a no without argument. Keep the tone of someone who knows the machine, not of someone chasing a target. We write openers in your voice and test them with the team. Record what the buyer said, so the next call picks up the thread and does not repeat the question.
Who follows up when the salesperson who made the quotation is on leave?
A named deputy follows up from the register, with the notes the first person left. The routine lists live quotations with their next step, so cover is possible without a long briefing. If nobody else can speak with authority on price, the deputy collects the buyer's message and promises a call from the owner. We suggest that the salesperson leaves a short note on each live quotation before going on leave, which takes little time and prevents a good quotation going cold.
How soon will we see results?
It depends on the trade, the channel and what is already in place. After we have read your brief and spoken to you, we say what we would expect to move first and how it will be measured against the baseline. Nothing here is guaranteed.
Who will actually do the work?
The person you speak to before anything starts. We work from one office in Nagarbhavi, Bengaluru, with no account managers in between.
What do you need from us?
Your brief, and a conversation. After that, access to whatever this work touches, such as your website, your accounts or your enquiry record, and time with the people who handle your enquiries.

Your next practical step

Tell us what you are trying to grow, and we will read it before we call.

Eight short steps, mostly taps. Skip anything you would rather answer on the call.