Skip to content
GullySales

Denting and painting shops · CRM

Keep every car, owner and approval in one place the whole shop reads.

A CRM for a denting and painting shop is a record of every enquiry and car from first call to delivery, with the source, the estimate, the insurer approval and the owner's messages in one view. GullySales works on choosing the fields, setting the stages and getting the team to use them.

Scope, fee, reporting and term are agreed in writing after we have read your brief and spoken to you.

Realistic editorial illustration of auto repair shops at work in India

What CRM means

A CRM is the record where every enquiry, call and quote is kept against a customer, replacing separate notebooks, spreadsheets and memory. GullySales sets up or cleans an existing CRM and reports from it by enquiry outcome rather than by activity logged.

Last updated 14 Nov 2026.

For denting and painting shops

Where it usually goes wrong, and what we would do.

  • “The car's status lives in six heads”

    The front desk knows the estimate, the supervisor knows the panel stage, the painter knows the booth slot and the owner phones whoever picks up. One shared record with a stage on each car stops the same question being answered six ways.

  • “Approvals need a trail”

    The surveyor's revision, the extra work approved and the date it came are the facts a dispute turns on. A record that stores each approval with a photograph of the damage protects the shop and shortens the argument.

  • “Repeat and referral sources are invisible on paper”

    A shop remembers a good surveyor or a regular fleet by feel. A source field filled on every job turns that feeling into a count, and shows which relationships bring cars and which only ask for quotes.

  • “Old customers are the cheapest next job”

    The owner who had a bumper done will need a door or a touch-up in time. A record with the car, the work and the date lets the shop send a reminder, where a paper register leaves it to memory.

What we do

What we deliver for denting and painting shops.

The work available for this need. We agree the deliverables and responsibilities for your engagement in writing.

  1. A job pipeline with stages

    Enquiry, estimate, approval, parts, panel work, paint, finishing, ready, delivered.

    Result: Every car sits at a visible stage.

  2. Fields for insurer and surveyor

    Insurer, claim reference, surveyor, approval dates and extra-work notes on each job.

    Result: Approval history is in the file, not in a message thread.

  3. Source and referrer tagging

    A required source on each new job, with a short pick list.

    Result: A source-wise count is available whenever it is needed.

  4. A tool the team will open

    A simple CRM set up in the shop's language, with a short guide for the front desk and supervisor.

    Result: Staff update the stage without being chased.

  5. Reminders for returning owners

    Fields and reminders for service touch-ups, fleet reviews and follow-up after delivery.

    Result: Owners who have come before hear from the shop again.

How the result is measured

  • Enquiries logged in the CRM
  • Data completeness
  • Reports generated from CRM data

Recorded as a baseline before work starts, so every later report has an honest comparison.

Fields worth keeping

The record follows the car from the first photograph to delivery.

Car registration and model
Entered by the front desk at intake. Lets the shop find the car in one search and match paint and parts.
Insurer, claim number and surveyor
Entered when the claim is lodged. Lets anyone answer the owner's question about where the approval stands.
Estimate version and date
Updated by the estimator each time panels are opened. Gives the owner a written trail when the figure moves.
Source and referrer
Ticked at the first contact. Lets the owner of the shop see which agent or tow driver sent the car and thank them.
Next reminder and its owner
A person and a date. Stops an estimate from sitting while everyone assumes someone else is calling.

Who it is for

This is written for these denting and painting shops.

  • Cashless insurance bodyshops
  • Independent denting and painting garages
  • Dealer-attached authorised bodyshops
  • Premium and luxury car body repair specialists
  • Scratch, dent and paintless dent removal specialists
  • Cab and fleet repair shops
  • Two-wheeler and commercial vehicle body shops
  • Mobile dent repair teams

Before you decide

When this may not be the right fit.

  • The shop runs on a single estimator who remembers every car, and a new tool would only add work before the team feels the need.
  • Insurance papers arrive on several staff phones and cannot be collected, so the record would be incomplete from the start.
  • You do not yet agree on stage names, and a CRM would freeze the confusion in place.

Before you decide

Agree the work. Know how to judge it.

CRM for denting and painting shops: use these checks to prepare, choose the scope, and review what changes.

Bring the right evidence

List the records your team uses and show how an enquiry becomes an order today. Bring examples of duplicate entries, missing owners, and reports that require manual correction.

Make the scope clear

Agree the stages, required fields, access roles, and integrations before configuring the system. Separate software subscriptions from setup, data work, and training.

Check the work in use

Ask the people who will use the CRM to complete a real handover and find the next action without help. Check that the management report can be traced back to individual records.

Know when to change course

If the process is unclear, buying a more complex CRM adds more places for confusion. Start with the minimum fields and rules the team can use consistently.

These are discussion points, not a fixed package. GullySales confirms the deliverables, responsibilities, fee, and term in writing after reading your brief and speaking with you.

Before we start

What to have ready before the work starts.

The records, access and decisions this work needs from denting and painting shops. Anything missing is noted in the written scope, with who will supply it.

The paper register or sheet now in use
Bring whatever your desk uses today to log cars, whether a bound register, a spreadsheet or a whiteboard. We learn from its columns and its gaps. If there is none, we sit with the adviser and write one from how they work, and the setup takes a different shape.
A list of who sees which owner records
Write down who in the team should see phone numbers, insurer details and amounts, and who should not. Owner data is sensitive and a shared login is a risk. Without a list, we begin with only the adviser and the owner seeing everything.
A sample of closed claim jobs
Give us a few recent claim jobs with the paperwork that came with them, with personal details removed if you prefer. We use them to decide which fields matter. Without examples, the fields are guessed, and the team ends up filling boxes it never reads again.
The adviser and accounts person together
These two see different parts of the same car: the adviser sees the owner and the estimate, the accounts person sees the invoice and the insurer payment. Both must sit with us, because a record built from one view leaves a gap the other has to fill by phone.
A decision on the tool you will pay for
Decide whether you will use a simple sheet, a tool you already pay for or a new one. We advise, but the cost and the contract are yours. If you hesitate, we start in a sheet and move later, accepting that some work will have to be copied.

How it works

How the CRM work runs

The work itself, in order. How an engagement starts, from your brief to a written scope, is set out on our method page.

  1. 1

    Trace one car from call to keys

    We take a recent job and walk it through your shop with the adviser, the estimator and the accounts person: the first call, the estimate, the surveyor visit, the approval, the bay, the paint, the delivery. At each point we note who knows the status. The map of who holds what is the base for every field we will add.

  2. 2

    Agree the stages in your words

    Together we write the stage names so that anyone on the floor knows them without an explanation: waiting for surveyor, approved, in the bay, at paint, ready, delivered. You decide where one stage ends and the next begins. A stage that two people read differently is rewritten until it cannot be.

  3. 3

    Decide the fields for insurer and surveyor

    You tell us what you need on a claim car: the insurer, the claim number, the surveyor's name, the date of approval and whether a supplementary estimate is pending. We include only fields your team will fill in. Anything the accounts person would have to hunt for is left out.

  4. 4

    Load a few real jobs and try the screen

    We enter a handful of recent jobs into the chosen tool and sit with the adviser while they use it as if a call has just come in. We watch where they hesitate. You choose whether the tool stays or is changed. We do not move the whole shop to it until the adviser says it is easier than the register.

  5. 5

    Set the reminders for returning owners

    We write the rules that tell the desk when to call back: an estimate left unanswered, a car ready but not collected, an owner whose last job was some time ago. You approve the wording of each reminder. Each rule names a person, so that no reminder arrives in a shared inbox that nobody opens.

  6. 6

    Compare the record with the old register

    After the team has used the tool for a spell, we compare it against the paper register and the cars physically in the yard. You see where the two differ and why. The comparison also shows how many jobs have a source tagged. You decide who keeps access and who owns the data.

Where this fits

Three pieces of sales work, in this order.

This work sits inside sales management. A target, a review routine and someone who owns the number.

  1. Step 1

    Sales audit

    Find where deals are being lost and what to fix first.

    Start here if you cannot say where orders are lost.

  2. Step 2

    Sales process design

    One written way to sell, from first enquiry to repeat order.

    Start here if every salesperson sells differently.

  3. Step 3 · you are here

    Sales management

    A target, a review routine and someone who owns the number.

    Start here if the team has targets and no routine.

Tell us what you need Your brief is read before we call. Scope, fee and term in writing.

FAQ

Questions owners ask before they call.

Not here? More answers, or ask on WhatsApp.

Do we need special software?
Not necessarily. A well-set sheet or a simple CRM can work. We pick the lightest tool the team will actually keep updated, and say so if a sheet is enough.
Can it connect to the insurer's portal?
Insurer portals are their own systems and their access rules are the insurer's. We keep the shop's record alongside, and do not connect to portals we have no permission to use.
Who owns the data?
The shop. We set up the record and the fields, and the shop keeps the file, so it stays with you if you change tools.
Who should be allowed to see owner records?
Give access to the front desk, the estimators and the owner, and keep claim documents restricted. An owner's policy and registration are personal, so access should match need. Ask a staff member to log out on shared screens, and keep the list of users current.
Can the system send our owners messages automatically?
It can, but we begin with the reminders that go to your own team, because an automatic message to an owner needs a wording you have read and a consent you can show. Once the stages are trusted, status messages and ready-for-collection notes can be added, each with a stop rule. Whatever is sent must come from the shop's own business number, and the owner should be able to say they do not want it.
What if the team keeps writing in the register as well?
That happens in the first stretch, and we plan for it. For a period, both are kept and compared, so that the team sees the tool is correct. Then the register is closed on an agreed date, with the owner announcing it to everyone. If a person refuses to use the tool, the owner decides how to handle it. We can show where the tool is slower for them and change it.
How much does it cost?
There is no price list, because the work differs by business. The fee is scoped after we have read your brief and spoken to you, and put in writing before anything starts, split into our time, your media spend and production.
How long is the contract?
The term is agreed in writing after we have spoken, along with the fee and the reporting. It is never a default twelve months, and renewal is decided on the numbers against the baseline recorded at the start.
How soon will we see results?
It depends on the trade, the channel and what is already in place. After we have read your brief and spoken to you, we say what we would expect to move first and how it will be measured against the baseline. Nothing here is guaranteed.
Who will actually do the work?
The person you speak to before anything starts. We work from one office in Nagarbhavi, Bengaluru, with no account managers in between.

Your next practical step

Tell us what you are trying to grow, and we will read it before we call.

Eight short steps, mostly taps. Skip anything you would rather answer on the call.