Skip to content
GullySales

Wheel alignment centres · CRM

Keep a record of each vehicle so the next alignment is a call you place.

A CRM for a wheel alignment centre is a simple customer and vehicle record that holds each owner, registration number, job and next due check. GullySales works on setting up fields your counter will fill in and a list your team reads each morning.

Scope, fee, reporting and term are agreed in writing after we have read your brief and spoken to you.

Realistic editorial illustration of auto repair shops at work in India

What CRM means

A CRM is the record where every enquiry, call and quote is kept against a customer, replacing separate notebooks, spreadsheets and memory. GullySales sets up or cleans an existing CRM and reports from it by enquiry outcome rather than by activity logged.

Last updated 14 Nov 2026.

For wheel alignment centres

Where it usually goes wrong, and what we would do.

  • “The printout is filed and then lost”

    Each job produces a sheet that goes home with the driver. The bay keeps nothing, so the next check, the vehicle's history and the owner's number sit nowhere you can find them.

  • “A person, a car and a fleet are different things”

    One owner may bring two cars, and a transport firm brings twenty. A record built around the phone number alone cannot tell which vehicle is due, so the vehicle needs its own line.

  • “Fleet vehicles drift when nobody owns the list”

    A fleet manager sends a few vehicles and then another bay offers a lower rate. Without a list of vehicles and dates, nobody notices that the fleet has gone quiet.

  • “Spreadsheets break when two people use them”

    A shared sheet works until a technician edits a row the counter was reading. Simple tools with clear fields and one owner hold up far better than an improvised file.

What we do

What we deliver for wheel alignment centres.

The work available for this need. We agree the deliverables and responsibilities for your engagement in writing.

  1. A field list for the counter

    Owner name, phone, registration, make, job done, printout noted and next check date, kept short enough to fill at the desk.

    Result: The record is completed while the customer waits.

  2. A tool chosen for your size

    A sheet, a basic app or a CRM already in ordinary use in India, picked to match how many people will enter data.

    Result: The tool suits the people using it.

  3. A fleet register

    Each fleet with its vehicles, contact and last service date in one place.

    Result: You can see which fleet vehicles are overdue.

  4. A morning list

    A short list of vehicles due for a check and customers to call, read at the start of the day.

    Result: The team knows who to ring.

  5. An import of existing records

    Past job cards and phone contacts entered once so the list starts with history.

    Result: The list is useful from the first day.

  6. A simple owner guide

    One page on who enters what, when, and how to correct a mistake.

    Result: Any new staff member can keep the record.

How the result is measured

  • Enquiries logged in the CRM
  • Data completeness
  • Reports generated from CRM data

Recorded as a baseline before work starts, so every later report has an honest comparison.

Fields worth keeping

A record per vehicle needs only a few fields, each filled at the counter while the customer waits.

Registration number
Entered by the counter at booking. It is the key for each vehicle, so one owner with two cars or a whole fleet never gets mixed up.
Owner name and phone
Filled at the counter and checked by reading the number back. Lets you call the owner when the next check falls due.
Symptom reported
The counter writes the driver's own words. Later it shows which complaints bring in repeat jobs and which come from road damage.
Printout noted and advice given
The technician marks whether angles were in range and whether a part needed replacing. It lets you phrase the reminder with a real reason.
Source and referrer
Tyre dealer, garage, fleet, map or walk-in, written once at booking. It tells you which source to thank and which to work harder.

Who it is for

This is written for these wheel alignment centres.

  • Private car owners with steering pull or uneven tyre wear
  • SUV and MUV owners who drive long highway distances
  • Taxi and cab operators with a small fleet
  • Schools, colleges and companies with staff buses
  • Goods carriers and delivery van operators
  • Tyre dealers who refer alignment and balancing jobs
  • Garages and service centres without their own aligner
  • Owners of lowered or modified cars

Before you decide

When this may not be the right fit.

  • Nobody at the counter has time to fill a record while the customer waits, so a CRM would stay empty and the owner would stop trusting it.
  • Your job cards are not kept in any one place, so the first step is gathering them before choosing a tool.

Before you decide

Agree the work. Know how to judge it.

CRM for wheel alignment centres: use these checks to prepare, choose the scope, and review what changes.

Bring the right evidence

List the records your team uses and show how an enquiry becomes an order today. Bring examples of duplicate entries, missing owners, and reports that require manual correction.

Make the scope clear

Agree the stages, required fields, access roles, and integrations before configuring the system. Separate software subscriptions from setup, data work, and training.

Check the work in use

Ask the people who will use the CRM to complete a real handover and find the next action without help. Check that the management report can be traced back to individual records.

Know when to change course

If the process is unclear, buying a more complex CRM adds more places for confusion. Start with the minimum fields and rules the team can use consistently.

These are discussion points, not a fixed package. GullySales confirms the deliverables, responsibilities, fee, and term in writing after reading your brief and speaking with you.

Before we start

What to have ready before the work starts.

The records, access and decisions this work needs from wheel alignment centres. Anything missing is noted in the written scope, with who will supply it.

A copy of the job cards and phone list
Photographs or scans of the cards, and an export of the contacts from the phone used at the counter. Messy is acceptable. We clean them. If the cards are not shared, the system starts empty and loses the history of repeat owners, which is what the next-check reminder is built from.
The fleet list with contact names
A sheet of each fleet you serve, the vehicles you have seen and the person who authorises work. A notebook page will do. Without it, fleet vehicles are entered as separate private owners, and no one can see how many from one operator have visited the bay.
Agreement on who updates the record
A named person at the counter who adds the vehicle after a job. Only you can allot it. When two people share the task and neither owns it, entries are skipped on busy days, and the morning list is built on a record that is already out of date.
Your decision on where printouts are kept
Whether the printout is stored as a photograph in the record or kept in a file on the shelf. Either works, but the choice must be made. If it is open, some printouts end up in the record and some in drawers, and neither place can be trusted.
A device for the counter
A phone, tablet or desktop that stays at the counter and is signed in to the record. We do not supply it. Without one, entries are made later from memory by whoever has time, and the registration numbers become errors.

How it works

How the CRM work runs

The work itself, in order. How an engagement starts, from your brief to a written scope, is set out on our method page.

  1. 1

    List what the counter writes down today

    Before any tool is chosen we look at the register, the job cards, the phone contacts and the printouts, and list what is recorded where. You show us what the counter actually writes and what only lives in someone's head. We finish with a map of existing records that tells us what must be moved, what is duplicated and what has never been captured.

  2. 2

    Decide the vehicle and owner fields

    A vehicle record needs the registration number, the model, the last job and the next check; an owner record needs a name and a number; a fleet needs a contact who authorises the work. We draft the fields with your counter staff and cut any they would not fill in. You approve the shortlist, because each field adds a few seconds at a busy counter.

  3. 3

    Pick software the front desk will use

    We set the field list against two or three tools sized for a small bay, and test each by entering five real vehicles. You decide on ease at the counter, not on features. If a spreadsheet with locked columns does the job, we say so. The tool is picked, and the cost to you is stated before anything is set up.

  4. 4

    Import the old records in a trial run

    We take a copy of the job cards and the phone list, clean the registration numbers and merge repeats, then load them into a trial copy of the tool. You check twenty entries you know well, including a fleet with several vehicles. Mistakes found here cost nothing. The real import happens only after you sign off the trial.

  5. 5

    Run the morning list with the counter staff

    The first list is built of vehicles due for a check, quotes awaiting reply and fleet vehicles not seen for some time. The staff member who opens it each morning tells us what is missing or confusing. We adjust the list until it fits the way they actually start the shift, and write a one-page guide in plain words.

  6. 6

    Compare the record with the old count

    After the counter has used the record for a while we compare the number of repeat visits, reminders sent and fleet vehicles back in the bay with the figures taken from the old files before the change. You judge what the record has shown that the file never did. If a field is never filled, it is removed.

Where this fits

Three pieces of sales work, in this order.

This work sits inside sales management. A target, a review routine and someone who owns the number.

  1. Step 1

    Sales audit

    Find where deals are being lost and what to fix first.

    Start here if you cannot say where orders are lost.

  2. Step 2

    Sales process design

    One written way to sell, from first enquiry to repeat order.

    Start here if every salesperson sells differently.

  3. Step 3 · you are here

    Sales management

    A target, a review routine and someone who owns the number.

    Start here if the team has targets and no routine.

Tell us what you need Your brief is read before we call. Scope, fee and term in writing.

FAQ

Questions owners ask before they call.

Not here? More answers, or ask on WhatsApp.

Do we need expensive software?
No. A well-kept sheet can serve a single bay. A CRM is worth it when several people enter data or fleets grow.
Is customer data safe in a CRM?
Keep access to people who need it and do not share the list. Confirm the current data protection rules with your adviser.
Who should update it?
The person at the counter, at the time of the job. A record filled in later from memory drifts from what happened.
Can the printout be stored in the record?
Yes, as a photograph attached to the vehicle line, if your tool allows files. The sheet then sits beside the next check date, and a technician can compare two visits without asking the owner to find the old paper.
Can the record remind owners of the next alignment check?
Yes, if the date of the last job and the vehicle's contact number are captured. The record can list the owners due for a check, and the counter staff send a short message or make a call from that list. The wording is yours to approve, and each reminder should say why it is being sent, such as the interval the technician advised after the last job. We do not set a fixed schedule, since the right interval depends on the vehicle and the roads it travels.
Who owns the customer data if we change the tool later?
You do. The records are your customers' details and your job history, and any tool we help you choose must let you export them in a plain file. We check this before recommending a tool, and we ask what happens to the data if the tool's maker ends the service. Keep an exported copy somewhere you control. If you later move to another tool, the same fields and the same file carry the history across, so the change costs effort but not memory.
How much does it cost?
There is no price list, because the work differs by business. The fee is scoped after we have read your brief and spoken to you, and put in writing before anything starts, split into our time, your media spend and production.
How long is the contract?
The term is agreed in writing after we have spoken, along with the fee and the reporting. It is never a default twelve months, and renewal is decided on the numbers against the baseline recorded at the start.
How soon will we see results?
It depends on the trade, the channel and what is already in place. After we have read your brief and spoken to you, we say what we would expect to move first and how it will be measured against the baseline. Nothing here is guaranteed.
Who will actually do the work?
The person you speak to before anything starts. We work from one office in Nagarbhavi, Bengaluru, with no account managers in between.

Your next practical step

Tell us what you are trying to grow, and we will read it before we call.

Eight short steps, mostly taps. Skip anything you would rather answer on the call.