Home loan providers · Lead generation
Find the buyer while the flat is still being chosen, not after the bank is.
Lead generation for a home loan provider means placing the lender in front of a borrower, a builder's sales team or a broker before the lender has been decided. GullySales works on site-day desks, locality search pages, balance transfer enquiries and one register that holds every source.
Scope, fee, reporting and term are agreed in writing after we have read your brief and spoken to you.

What lead generation means
Lead generation is the combined work of every channel that brings in a new enquiry, whether from search, adverts, referrals or a stall at an exhibition. GullySales runs these channels together and reports the number of enquiries each one produced, not the activity behind it.
Plan the next part of the work
Last updated 21 Nov 2026. Rules for this trade differ by state and professional body, and they change. We describe restrictions in general terms, so check the current position with your own council or adviser before you publish anything.
For home loan providers
Where it usually goes wrong, and what we would do.
“The builder's desk names the bank first”
A couple at a site visit is handed a card listing the project's tie-up banks and rings one of them that evening. A lender missing from that desk is compared late or never, so lead sources begin with the builder's sales head, not with an advert.
“Each borrower type searches for a different thing”
A salaried first-time buyer, a self-employed shopkeeper, a plot owner planning construction and an NRI do not type the same words. One general home loan page answers none of them well. Each type needs the page that matches its own question.
“The balance transfer borrower already pays another bank”
This borrower is looking for a better rate and a lender who explains the steps honestly. A plain comparison page and a named contact reach them. A banner with a rate on it does not.
“Three sources, three calls”
The branch, the DSA and the website each log the same enquiry, so the borrower gets three calls or none. Nobody can say which source produced the sanction. A shared register has to exist before any new spend is judged.
What we do
What we deliver for home loan providers.
The work available for this need. We agree the deliverables and responsibilities for your engagement in writing.
Site-day desk plan
A routine for placing a loan representative at a builder's project on site-visit days, with a form that records the buyer's interest and starts the document list.
Result: The buyer's interest is recorded at the project, not left on a visiting card.
Borrower-type landing pages
Separate pages for salaried, self-employed, resale, construction, plot, balance transfer and NRI borrowers, each with its own document checklist.
Result: A searcher lands on the page for their own situation.
Builder and broker introduction sheet
A short sheet covering what you lend against, which documents you accept for older flats and whom to call at the branch.
Result: A broker can pass your terms on without a phone call.
Single enquiry register
One record for every branch, DSA and website enquiry, with source, borrower type, property stage and owner.
Result: A repeat enquiry shows as one line.
Source comparison
A plain list of enquiries by source, builder and branch, set against the files that reached sanction.
Result: You can see which source produced files, not only enquiries.
How the result is measured
- Relevant enquiries by source
- Duplicate and unsuitable enquiries
- Time to the first response
- Accepted enquiries reaching an agreed next step
Recorded as a baseline before work starts, so every later report has an honest comparison.
What to capture or send
What a home loan desk should record when a buyer first shows interest.
The first note decides which officer rings and what the call is about. Record it where the buyer was chosen, not later at the branch.
- Project and flat under consideration
- Ask at the builder's site desk and write the project, tower and unit type. It tells the officer which approved-project papers to check before the call.
- Salaried, self-employed or balance transfer
- The desk executive ticks one. Each leads to a different document list and a different officer, so a wrong tick sends the buyer to the wrong conversation.
- Who else is part of the application
- Note a spouse or parent as co-applicant when mentioned. Their income and consent change the file, and ringing only the first name leaves them out.
- Builder or broker who made the introduction
- Record the name and the person at the desk. Tell that partner the same day that you rang the buyer, since silence makes them send the next name elsewhere.
- Documents the buyer already has
- A short tick-list of identity, income and property papers held. The officer sends the missing ones in a message after the call, not a full list.
- Consent to be called and messaged
- Taken in writing at the desk and entered with the date. Without it, the number stays on the register but no message goes out.
Who it is for
This is written for these home loan providers.
- Housing finance companies with a regional footprint
- Banks' home loan desks and retail branches
- Lenders focused on salaried first-time buyers
- Affordable housing lenders serving self-employed borrowers
- Home construction and plot loan specialists
- Balance transfer and top-up focused lenders
- Lenders with builder and project tie-ups
- NRI home loan desks
Before you decide
When this may not be the right fit.
- Your credit team has not agreed which borrower profiles you lend to, so enquiries would be collected that the file cannot serve
- No officer is free to call a site-desk name on the same day, so the introduction would reach a rival first
Before you decide
Agree the work. Know how to judge it.
Lead generation for home loan providers: use these checks to prepare, choose the scope, and review what changes.
Bring the right evidence
Define the organisations or buyers you can serve and the reasons they would consider a conversation. Bring examples of accepted and rejected prospects so the selection rule is visible.
Make the scope clear
Agree the research sources, contact approach, qualification rules, and handover. Clarify which meetings count as accepted and what happens to replies that are not ready to buy.
Check the work in use
Review why a prospect was selected and what was learned from the response. Count held, relevant conversations separately from contacts found, messages sent, or meetings booked.
Know when to change course
If the same objection appears repeatedly, adjust the offer or buyer group before increasing outreach. Respect a request to stop contact and keep the exclusion in the record.
These are discussion points, not a fixed package. GullySales confirms the deliverables, responsibilities, fee, and term in writing after reading your brief and speaking with you.
Before we start
What to have ready before the work starts.
The records, access and decisions this work needs from home loan providers. Anything missing is noted in the written scope, with who will supply it.
- The loan file register for a full year
- We need every file with its source, stage and outcome, even if it sits in a spreadsheet kept by branch clerks. Gaps and blank source columns are acceptable and we will mark them as unknown. Without it, we cannot tell which source earns its cost, and the plan falls back on a guess about builders and brokers.
- A list of projects and builder contacts
- Bring the projects where you hold approval, the ones where you hold a desk and the sales head's name at each. A list kept by a relationship manager is enough. If it is missing, we cannot choose site days, and the desk plan covers only the projects someone remembers to mention.
- The officer who will staff the desk
- Name the person who will sit at a builder's desk, with the days they can be spared from the branch. A desk staffed by whoever is free tells the buyer nothing about the lender. Without a named officer, the plan can only describe a desk and cannot test one.
- Your credit policy summary for each borrower type
- A short note from the credit head saying which borrower types you take, which you refuse and which need a senior look. It may be informal. Without it, we might write a page for a group you cannot lend to, and the enquiries it brings become wasted calls.
- A decision on who answers new enquiries
- Settle before launch which officer takes web, broker and desk enquiries, and who covers when they are away. The decision belongs to the sales head, not to us. If it is left open, the register fills with enquiries nobody claims and the test of each source tells you nothing.
How it works
How the lead generation work runs
The work itself, in order. How an engagement starts, from your brief to a written scope, is set out on our method page.
- 1
Tally last year's files by source
We begin with the file register your credit and sales teams already keep, and sort every sanctioned, rejected and dropped file by where the buyer first came from: builder desk, broker, walk-in, website, referral or an existing borrower. You confirm which sources the register records honestly and which are guesses. What exists afterwards is one plain count of sources, so no new effort is planned blind.
- 2
Sit at a builder's site desk
One of us spends a site day beside your officer at a project where you hold a desk, or at one where you do not and a rival does. We watch what the buyer is asked, who names the bank first, and where the booking form and the loan conversation meet. You decide which projects deserve a desk and which only need a visiting officer.
- 3
Sort borrowers by what they type
Salaried first-time buyers, self-employed applicants, plot-and-construction borrowers and people moving a loan from another bank search for different things. We list the phrases each group uses from your branch notes and call recordings, then agree which need their own page. You strike out any group your credit policy does not serve, so no page invites an enquiry you must refuse.
- 4
Draft the broker and builder sheet
We write the one-page introduction that a builder's sales head or a loan broker can read at a glance: the files you take, documents you need first, the person to call and what a clean file looks like. Your credit head reads every line before it leaves the building. The sheet then goes to partners by your relationship manager, not by cold mail.
- 5
Place a test enquiry through every door
Before anything is switched on, we send a test enquiry through the site desk form, the borrower page, a broker referral and a balance transfer request, and watch each land in the single register. You check that the right officer is called, the source is stamped and no enquiry sits unclaimed. Any door that fails is fixed before a real buyer uses it.
- 6
Read sources against the starting tally
With the register filling, we compare each source against the tally made at the start: enquiries, files logged, files moved to sanction, files that stalled on documents. You and your regional head sit with it and decide where to add desks, where to stop and which partner to visit again. We report what the records show, and we promise no count.
Where this fits
Three pieces of sales work, in this order.
This work sits inside sales process design, at stage 1, prospecting and lead generation. The audit comes before it, and sales management keeps it running.
Step 1
Sales audit
Find where deals are being lost and what to fix first.
Start here if you cannot say where orders are lost.
Step 2 · you are here
Sales process design
One written way to sell, from first enquiry to repeat order.
Start here if every salesperson sells differently.
Step 3
Sales management
A target, a review routine and someone who owns the number.
Start here if the team has targets and no routine.
FAQ
Questions owners ask before they call.
Not here? More answers, or ask on WhatsApp.
Which source should a new lender start with?
Can we buy lists of borrowers to call?
Do you promise sanctioned files?
What should we do with enquiries from buyers we cannot lend to?
Should we ask builders for exclusive desks?
How much does it cost?
How long is the contract?
How soon will we see results?
Who will actually do the work?
What do you need from us?
More for home loan providers
Related work to consider.
Closest to this: leads and follow-up
Also for home loan providers
Or start from the overview: sales and marketing for home loan providers.
Your next practical step
Tell us what you are trying to grow, and we will read it before we call.
Eight short steps, mostly taps. Skip anything you would rather answer on the call.