Skip to content
GullySales

Insurance aggregators · Follow up systems

Contact each abandoned quote once, on the right channel, in plain words.

A follow-up system for an insurance aggregator is the rule set that decides who contacts a buyer who left a quote, by which channel, with what words and when to stop. GullySales writes the rules, the messages and the log your team works from.

Scope, fee, reporting and term are agreed in writing after we have read your brief and spoken to you.

Realistic editorial illustration of insurance agents and advisers at work in India

What follow up systems means

A follow-up system is the set routine for calling, messaging or emailing an enquiry more than once, since most buyers do not decide on the first conversation. GullySales sets the number and timing of follow-ups so an undecided buyer keeps hearing from you until they decide either way.

Last updated 14 Nov 2026. Rules for this trade differ by state and professional body, and they change. We describe restrictions in general terms, so check the current position with your own council or adviser before you publish anything.

For insurance aggregators

Where it usually goes wrong, and what we would do.

  • “The first reply sets the tone”

    A buyer who asked for a quote at night hears from three firms by morning. The reply that quotes the buyer's own details, offers help and asks nothing aggressive stands apart from the scripted opener everyone else uses.

  • “Persistence turns into harassment”

    Every extra call after a clear no costs trust and invites a complaint. A stop rule is part of the system: the number of tries, on which channels, and what ends them. Without it callers decide alone, and the loudest wins.

  • “The channel the buyer used is the channel to answer”

    A person who messaged on WhatsApp resents a cold call. A person who left a phone number only may expect a call. Pick the reply channel from the buyer's own action and the consent on record.

  • “A lapsed policy is a different conversation”

    A buyer whose motor cover has expired needs urgency and clarity about the gap in cover, not the new-customer opener. Renewal follow-up should read the policy status first, and say what the buyer already knows about the old policy.

What we do

What we deliver for insurance aggregators.

The work available for this need. We agree the deliverables and responsibilities for your engagement in writing.

  1. Follow-up rule sheet

    One page stating who contacts which lead, on which channel, in what order, and when the attempt ends.

    Result: A rule sheet every caller and manager can quote.

  2. Message set for each stage

    Wording for abandoned quote, documents pending, payment pending and renewal due, adjusted for call, WhatsApp and email.

    Result: A set of messages with space for the buyer's own quote details.

  3. Outcome codes and a call log

    A short list of outcomes such as reached, asked to call later and not interested, recorded after every attempt.

    Result: Every attempt ends with a coded outcome.

  4. Stop and opt-out handling

    A rule that removes a buyer from further contact once they decline, and a record of the date and channel.

    Result: A suppression list your team checks before dialling.

  5. Manager review sheet

    A view of cases without a next step, so unattended quotes are found and reassigned.

    Result: A list of untouched cases a manager clears.

How the result is measured

  • Follow-up completion rate
  • Average number of follow-ups before close
  • Enquiries closed after repeat follow-up

Recorded as a baseline before work starts, so every later report has an honest comparison.

What to capture or send

What to send a buyer after an abandoned quote, and what to record.

Contact each abandoned quote once, on the channel the buyer used. A reply that sounds like a person keeps the number from being blocked.

First reply to the quote
A message that names the plan chosen and offers to answer one question. Record the channel and the time it went.
Document request
A short note naming the paper missing for the proposal form. Record when it arrives so the file does not sit.
Question the buyer asked
The doubt the buyer raised, such as a waiting period or a co-payment. Write it in the buyer's words and answer it on the next contact.
Call outcome and next step
Chosen by the caller after each attempt, such as call back at a stated time. A set of outcome codes makes the manager's review quick.
Renewal notice
A message ahead of a policy's renewal date in a calm tone, offering to compare again. Record whether the buyer replied.
Stop request
A reply that confirms the stop and removes the buyer from every list. Record it the same day.

Who it is for

This is written for these insurance aggregators.

  • Term insurance comparison sites for salaried buyers
  • Health insurance comparison for families and senior citizens
  • Motor insurance comparison and instant renewal platforms
  • Travel and personal accident comparison for short-term buyers
  • Marketplaces run by banks, wallets and fintech apps
  • Regional aggregators and point-of-sale networks working through agents
  • Employer-linked platforms offering voluntary top-up cover
  • B2B aggregators serving small brokers and agents with multi-insurer quoting

Before you decide

When this may not be the right fit.

  • Callers have no outcome codes, so you could not tell a refusal from a missed call
  • A buyer who said stop remains on the list, and a further call would break your own promise

Before you decide

Agree the work. Know how to judge it.

Follow-up systems for insurance aggregators: use these checks to prepare, choose the scope, and review what changes.

Bring the right evidence

Trace recent enquiries from arrival to the last recorded action. Include a won enquiry, an unsuitable one, and one that went quiet, with personal details removed for the initial discussion.

Make the scope clear

Agree who accepts each enquiry, what makes it qualified, and how ownership changes. Include a rule for missed replies and a clear reason for closing an enquiry.

Check the work in use

Pick an enquiry at random and ask the team to find its owner, latest conversation, and next action. Check that the record agrees with what actually happened.

Know when to change course

If no one has capacity to respond, assign that responsibility before buying more leads. Automation can support the owner, but it cannot replace an unresolved handover.

These are discussion points, not a fixed package. GullySales confirms the deliverables, responsibilities, fee, and term in writing after reading your brief and speaking with you.

Before we start

What to have ready before the work starts.

The records, access and decisions this work needs from insurance aggregators. Anything missing is noted in the written scope, with who will supply it.

A sample of call recordings or notes
Provide recordings or notes of first calls, with consent. They show how a reply lands. Without them we write from general practice. If recordings are not kept, a page of notes from two callers about their last ten calls will serve.
Your current contact rules
Bring any rule on attempts, hours and channels. We build on it. If none is written, compliance writes one first.
The dialler and messaging tools in use
Tell us which tools the callers use. The rules must fit them. If a tool cannot stop contact, we flag it. A tool that cannot honour a stop request is a risk you should know about before we build on it.
A manager with time to review
A manager must read samples. Without it, the rule sheet is never tested.
A record of opt-outs so far
Provide the list of buyers who asked to be left alone. They must be excluded. Without it, we start from an empty list and risk contacting them. Remove names and keep the numbers, source and date so we can exclude them in your system.

How it works

How the follow up systems work runs

The work itself, in order. How an engagement starts, from your brief to a written scope, is set out on our method page.

  1. 1

    Listen to the first calls after a quote

    We sit with callers while they ring new quote leads and note what the buyer says, how long the buyer takes to answer and what makes them hang up. You tell us what the callers have been asked to do. The result is a picture of the first reply, which sets the tone for everything after. We also note what the caller says about the product, since a buyer who is asked three questions in a row has not decided on the product at all.

  2. 2

    Write the rule sheet for contact attempts

    With your compliance head we decide how many attempts are made on which channel, when a buyer is left alone and when a call is stopped. We write it as one sheet. Persistence is set by consent and the buyer's replies, so that no one is contacted past the point they asked to be left.

  3. 3

    Reply on the channel the buyer used

    We set the rule that a WhatsApp enquiry is answered on WhatsApp and a form enquiry by the channel the buyer chose. You decide who answers each. Each reply names the product the buyer quoted for. We write the opening line for each channel in the words a caller would use, so the reply sounds like a person who has read the quote.

  4. 4

    Draft messages for each stage in plain words

    We write short messages for a quote sent, a document missing, a proposal incomplete and a policy near renewal. Callers rewrite them in their own words. Compliance reads the lines about cover and premium. Each message names the plan the buyer looked at and asks one question, so the buyer can answer in a word.

  5. 5

    Set outcome codes and the opt-out handling

    Every call or message ends with a code: reached, call back, not interested, wrong number, stop. Stop removes the buyer from all lists at once. You decide who checks that it works. The codes are few enough that a caller can pick one in a moment, because a long list gets guessed at and spoils the counts.

  6. 6

    Review calls and compare with the starting figures

    A manager reads a sample of calls and messages against the rule sheet, and we compare quotes completed and policies issued with the counts recorded before. You decide what to change. Persistence is judged by the buyers' responses, not by the number of attempts.

Where this fits

Three pieces of sales work, in this order.

This work sits inside sales process design, at stage 2, qualification. The audit comes before it, and sales management keeps it running.

  1. Step 1

    Sales audit

    Find where deals are being lost and what to fix first.

    Start here if you cannot say where orders are lost.

  2. Step 2 · you are here

    Sales process design

    One written way to sell, from first enquiry to repeat order.

    Start here if every salesperson sells differently.

  3. Step 3

    Sales management

    A target, a review routine and someone who owns the number.

    Start here if the team has targets and no routine.

Tell us what you need Your brief is read before we call. Scope, fee and term in writing.

FAQ

Questions owners ask before they call.

Not here? More answers, or ask on WhatsApp.

What is the right number of attempts?
There is no single right number. Set a limit your compliance head accepts, record each attempt, and stop when the buyer declines. Complaints are the signal to tighten the rule.
Should follow-up be automated?
Automate the reminder and the logging; keep the conversation with a person once the buyer replies. Check each platform's current rules for messages, and send only to buyers who consented.
How do we handle a prospect who stays silent?
Move them to a quiet list, then reach them again only around a natural date such as a renewal, and only if the consent on record allows it. Silence after a clear attempt is itself an answer.
Which channel should the second attempt use?
Use the channel the buyer used first and the one they agreed to, such as a message after an unanswered call. A new channel the buyer did not choose feels like pursuit. Record the channel and the outcome so the manager sees which contact worked.
How do we pick the channel for a second attempt?
Use the channel the buyer responded to, and change only if they ignored the first. A buyer who sent a WhatsApp message and never answered a call should get a message next, not another call. A buyer who gave only a phone number may prefer a call at a time they chose. Record the preference at the first contact, and let the system show it to the caller. Never switch to a channel the buyer has not consented to, and let a stop on one channel apply to all.
How do we close out a buyer who has gone silent?
Close the record politely after the agreed number of attempts, with one message that says the quote is still available and how to return. Move them to a list that is contacted only if the buyer comes back. Do not reopen them for every campaign. A buyer who never replied has told you something, and a closed record keeps your counts honest. At renewal time, you may contact them again only if consent still stands and your compliance head allows it.
How much does it cost?
There is no price list, because the work differs by business. The fee is scoped after we have read your brief and spoken to you, and put in writing before anything starts, split into our time, your media spend and production.
How long is the contract?
The term is agreed in writing after we have spoken, along with the fee and the reporting. It is never a default twelve months, and renewal is decided on the numbers against the baseline recorded at the start.
How soon will we see results?
It depends on the trade, the channel and what is already in place. After we have read your brief and spoken to you, we say what we would expect to move first and how it will be measured against the baseline. Nothing here is guaranteed.
Who will actually do the work?
The person you speak to before anything starts. We work from one office in Nagarbhavi, Bengaluru, with no account managers in between.

Your next practical step

Tell us what you are trying to grow, and we will read it before we call.

Eight short steps, mostly taps. Skip anything you would rather answer on the call.