Skip to content
GullySales

Loan distribution agencies · Follow up systems

Make sure a borrower hears back at every stage, including the bad news.

A follow-up system for a loan distribution agency decides who contacts the borrower, with what message, at each stage from first enquiry to disbursal or rejection. GullySales sets up the routine and the saved messages so a file never waits on one person's memory.

Scope, fee, reporting and term are agreed in writing after we have read your brief and spoken to you.

Realistic editorial illustration of banks at work in India

What follow up systems means

A follow-up system is the set routine for calling, messaging or emailing an enquiry more than once, since most buyers do not decide on the first conversation. GullySales sets the number and timing of follow-ups so an undecided buyer keeps hearing from you until they decide either way.

Last updated 14 Nov 2026. Rules for this trade differ by state and professional body, and they change. We describe restrictions in general terms, so check the current position with your own council or adviser before you publish anything.

For loan distribution agencies

Where it usually goes wrong, and what we would do.

  • “Silence after documents is the main leak”

    A borrower who has sent salary slips and heard nothing starts asking another agency. A short status message at each stage keeps the borrower with you while the lender works.

  • “Rejection needs a conversation, not silence”

    A rejected borrower still needs money. Telling them why in plain words, and offering a check with another lender on your panel, keeps the relationship and may save the file.

  • “The first call-back sets the tone”

    An enquiry that waits for a call loses ground to the agency that rings first. A rule on who picks up new leads, and what they say, removes the delay.

  • “Connectors need status too”

    A connector who learns about a file's fate from the borrower stops trusting the agency. Updating the connector at each stage costs a message and protects the next file.

What we do

What we deliver for loan distribution agencies.

The work available for this need. We agree the deliverables and responsibilities for your engagement in writing.

  1. Stage-wise follow-up map

    A table showing, for each stage, who contacts the borrower, which message to send and what the next step is.

    Result: Every stage has a named owner and a message.

  2. Saved WhatsApp messages

    Plain messages for document requests, login done, query raised, sanction, disbursal and rejection, written in your languages.

    Result: Executives send the right message in a tap.

  3. Call-back rule for new enquiries

    A rule on who answers a new lead, what the first reply says and what to do when the borrower does not pick up.

    Result: Every new lead has a named owner.

  4. Stalled-file review

    A routine for the team lead to read files with no movement and decide the next step for each.

    Result: No file sits without a next action.

  5. Connector update routine

    A message to the connector whenever a file they sent changes stage, drawn from the CRM.

    Result: Connectors learn of a file's stage from you.

How the result is measured

  • Follow-up completion rate
  • Average number of follow-ups before close
  • Enquiries closed after repeat follow-up

Recorded as a baseline before work starts, so every later report has an honest comparison.

What to capture or send

What to send a borrower at each stage, including the decline.

The first call-back
A call from the telecaller who owns the product, with a message after it listing the papers agreed. It sets the tone for the whole file.
After the documents arrive
A message confirming each paper received and what is still pending, so the borrower is not left guessing after sending photos.
When the lender raises a query
A message to the borrower with the query in plain words and the paper that answers it.
When the file is declined
A call, then a note giving the reason as the lender stated it and what might change it. Silence here sends the borrower to another agency.
The connector update
A short status to the person who sent the file, with the stage and the next step. No payout talk appears in it.

Who it is for

This is written for these loan distribution agencies.

  • Multi-lender DSAs with a tele-calling team and a small field force
  • Business loan and MSME loan agencies working with CAs and traders
  • Home loan and loan against property agencies tied to builders and property agents
  • Vehicle loan agencies sitting inside car and two-wheeler dealerships
  • Personal loan and credit card agencies running high-volume telecalling
  • Agencies that recruit and pay a network of part-time connectors
  • Small-town agencies serving salaried staff of local employers and government offices
  • Agencies attached to a single NBFC or housing finance company

Before you decide

When this may not be the right fit.

  • You have no record of which stage each file is at, so the messages would repeat what the borrower already knows.
  • Nobody owns the stalled-file list, and it would grow without a call being made.
  • You would automate decline messages, and a borrower in distress would get a form note.

Before you decide

Agree the work. Know how to judge it.

Follow-up systems for loan distribution agencies: use these checks to prepare, choose the scope, and review what changes.

Bring the right evidence

Trace recent enquiries from arrival to the last recorded action. Include a won enquiry, an unsuitable one, and one that went quiet, with personal details removed for the initial discussion.

Make the scope clear

Agree who accepts each enquiry, what makes it qualified, and how ownership changes. Include a rule for missed replies and a clear reason for closing an enquiry.

Check the work in use

Pick an enquiry at random and ask the team to find its owner, latest conversation, and next action. Check that the record agrees with what actually happened.

Know when to change course

If no one has capacity to respond, assign that responsibility before buying more leads. Automation can support the owner, but it cannot replace an unresolved handover.

These are discussion points, not a fixed package. GullySales confirms the deliverables, responsibilities, fee, and term in writing after reading your brief and speaking with you.

Before we start

What to have ready before the work starts.

The records, access and decisions this work needs from loan distribution agencies. Anything missing is noted in the written scope, with who will supply it.

The list of live and stalled files
We need the files as they stand, with the stage, the last contact and the person who holds each. A sheet is enough. Without it the stalled-file review starts blank and loses its first run, because nobody can say which files are stuck and which are only waiting on a lender.
Today's messages in use at the branches
Bring examples of what staff send now on WhatsApp and SMS, with borrower details removed. They show tone, mistakes and gaps. Without them we write from scratch and staff may keep sending their own versions, so the borrower hears two different voices from one agency.
A rule for how a rejection is explained
Decide what the borrower may be told about a lender's reason for declining, and ask your lenders what they permit you to say. Some limit it. Without a rule, staff improvise, a careless reason can mislead, and a borrower may be told something the lender never said.
Names for the call-back and the review
Name the people who call back, who covers them and who sits in the stalled-file review. Without names, routines are agreed in a meeting and then ignored, because each person assumes that another will make the call.
A list of connectors and what they are owed
Connectors need status, and some want to know when their payment is due. Bring the list and the terms you have agreed with each. Without it the update route cannot be set, and connectors go on asking by phone, which takes the file handlers away from the files.

How it works

How the follow up systems work runs

The work itself, in order. How an engagement starts, from your brief to a written scope, is set out on our method page.

  1. 1

    Find where files go silent today

    We go through the live and stalled files with the file handlers and mark where each went quiet: after papers were asked, after login, after a lender query, after a rejection. You say which silences cost you a borrower. The step ends with a list of the stages that need a routine first.

  2. 2

    Write the call-back rule for new enquiries

    We set out who calls a new enquiry, from which number, with what opening and what is asked first. You name the person and the cover. The rule makes the first contact the same in every branch, and it records the outcome of the call before the next begins.

  3. 3

    Draft saved messages for each file stage

    We write short WhatsApp and SMS messages for each stage: papers received, papers missing, file logged in with a lender, lender has a query, file closed. You and your adviser approve the wording. The messages say what happens next, and they never promise a result.

  4. 4

    Design the conversation for a declined file

    We write how the team tells a borrower that a lender has declined the file: who calls, what is said about the reason, what other options are mentioned and what is left to the borrower. You decide how much the borrower is told. The result is a call that is honest and kind, with a line on what the borrower can do next, such as correcting a paper or approaching a different product, without any promise that another lender will agree.

  5. 5

    Set the stalled-file review with the owner

    We set up a review at which the owner or product head goes through the files that have not moved, one by one, and decides to chase, close or hand over. You choose who attends. The step ends with a routine that no file leaves unless someone has decided.

  6. 6

    Share status with connectors by a fixed route

    We set the route by which connectors learn the status of their file, so they do not have to ask. You decide what they are told and when a file is closed to them, and we write the wording for a file that was dropped so that a connector does not hear of it from the borrower first. By the end every connector knows where to look for news.

Where this fits

Three pieces of sales work, in this order.

This work sits inside sales process design, at stage 2, qualification. The audit comes before it, and sales management keeps it running.

  1. Step 1

    Sales audit

    Find where deals are being lost and what to fix first.

    Start here if you cannot say where orders are lost.

  2. Step 2 · you are here

    Sales process design

    One written way to sell, from first enquiry to repeat order.

    Start here if every salesperson sells differently.

  3. Step 3

    Sales management

    A target, a review routine and someone who owns the number.

    Start here if the team has targets and no routine.

Tell us what you need Your brief is read before we call. Scope, fee and term in writing.

FAQ

Questions owners ask before they call.

Not here? More answers, or ask on WhatsApp.

How many follow-ups are too many?
Enough to keep the borrower informed, and no more than the borrower welcomes. Stop messages when asked, and respect the platform's current rules and any rules your lenders set on contacting customers.
Can this be automated?
Parts can, such as reminders and stage messages. A call to a rejected borrower or a worried family should come from a person who knows the file.
How many follow-ups are too many?
Stop when the borrower asks, or after the stage reaches a clear end. At each stage send what moves the file, not a reminder for its own sake. A borrower who gets a useful status message does not mind another, but one who gets pressure leaves.
What do we say when a lender declines a file?
Give the reason as the lender stated it, in plain words, and what would change it, such as clearing a card due. Offer to try a different lender only if the borrower's profile fits it. Never promise the next lender will approve.
How many reminders should a borrower get for missing papers?
Enough to be helpful and few enough not to harass, and you decide the number with your adviser and with how your borrowers react. Each reminder should say exactly which paper is missing and how to send it. After the number you set, the file is parked with a note, and the borrower is told the file can restart when the papers arrive.
Can follow-up messages be automated?
The sending can, the content must not. Saved messages are fine for status and reminders, but a rejection, a query or an upset borrower needs a person. We set which messages go out on their own and which need a person to click send. Check the platform's current rules on business messaging and on consent before any automation is switched on.
How much does it cost?
There is no price list, because the work differs by business. The fee is scoped after we have read your brief and spoken to you, and put in writing before anything starts, split into our time, your media spend and production.
How long is the contract?
The term is agreed in writing after we have spoken, along with the fee and the reporting. It is never a default twelve months, and renewal is decided on the numbers against the baseline recorded at the start.
How soon will we see results?
It depends on the trade, the channel and what is already in place. After we have read your brief and spoken to you, we say what we would expect to move first and how it will be measured against the baseline. Nothing here is guaranteed.
Who will actually do the work?
The person you speak to before anything starts. We work from one office in Nagarbhavi, Bengaluru, with no account managers in between.

Your next practical step

Tell us what you are trying to grow, and we will read it before we call.

Eight short steps, mostly taps. Skip anything you would rather answer on the call.