Skip to content
GullySales

Electrical contractors · CRM

Every BOQ, builder and consultant belongs in one list, not in three phones.

A CRM for an electrical contractor is a single record of every builder, consultant, factory and home enquiry, with the estimate sent, the next call due and the reason a job was won or lost. GullySales sets one up around how your firm actually quotes and bills, and keeps it light enough that site supervisors use it.

Scope, fee, reporting and term are agreed in writing after we have read your brief and spoken to you.

Realistic editorial illustration of electrical contractors at work in India

What CRM means

A CRM is the record where every enquiry, call and quote is kept against a customer, replacing separate notebooks, spreadsheets and memory. GullySales sets up or cleans an existing CRM and reports from it by enquiry outcome rather than by activity logged.

Last updated 14 Nov 2026.

For electrical contractors

Where it usually goes wrong, and what we would do.

  • “The relationship lives in one partner's phone”

    The senior partner knows which builder liked the last panel room and which consultant sends only LT jobs. When that person is on a site all day, nobody else can call. The record has to hold what the partner knows, in a form the office can act on.

  • “An estimate is a project, not a contact”

    One builder may have three BOQs open for three towers, each at a different stage of negotiation. A list of names cannot show that. The record needs the estimate as its own entry, with a value, a stage and a date for the next call.

  • “Running bills belong beside the sales record”

    The same builder who sends the next BOQ is also holding your last running bill. A salesperson who calls without knowing about the overdue measurement sheet walks into an awkward conversation. Billing status sits on the same screen as the relationship.

  • “An unused tool does more harm than no tool”

    Site supervisors will not open a heavy system at the end of a shift. If the entry takes more than a minute, it is skipped and the record goes stale. The fields stay few and the entry can be done from a phone.

What we do

What we deliver for electrical contractors.

The work available for this need. We agree the deliverables and responsibilities for your engagement in writing.

  1. A contact and company list cleaned from your files

    Builders, consultants, architects, facility managers and plant heads gathered from your phones, old estimates and invoices, with duplicates removed.

    Result: One list replaces the scattered ones.

  2. Estimate stages that match how you quote

    Stages such as site walk done, BOQ received, estimate sent, negotiation, order and lost, each with a clear meaning for your team.

    Result: Everyone describes a job the same way.

  3. Value and source recorded on every job

    Each order carries its amount and the person who sent it, whether a consultant, a repeat builder or a search.

    Result: You see which sources actually feed the order book.

  4. Next-call reminders on every open estimate

    A date for the next contact against each open estimate, shown on a daily list for the person responsible.

    Result: No estimate sits without a scheduled call.

  5. A view of reliance on your biggest client

    A simple summary showing how much of your work comes from your largest builder and which others are close behind.

    Result: You notice dependence before a slowdown arrives.

  6. Short training for the office and supervisors

    A walk-through of the entry screen for the people who will use it, and a one-page guide to what goes where.

    Result: Your team enters data the same way.

How the result is measured

  • Enquiries logged in the CRM
  • Data completeness
  • Reports generated from CRM data

Recorded as a baseline before work starts, so every later report has an honest comparison.

Fields worth keeping

The fields an electrical contractor's job and contact record needs, and who fills each.

Consultant or builder on the BOQ
Filled by the estimator when the BOQ arrives. Lets you see which consultants send enquiries and which builders pay.
Licence class asked for
Filled by the estimator from the tender. Shows the work you cannot bid for and which enlistment is worth applying for.
Estimate sent date and closing date
Filled by the office. Drives the next-call reminder so no estimate sits unchased.
Loss reason
Chosen from a short list when an estimate is lost: rate, make list, relationship, licence. Shows what to change in the next estimate.
Running bill status
Filled by the accounts person after each measurement is submitted. Puts payment chasing beside the sales record.
AMC end date
Filled by the supervisor at contract start. Lets a renewal call go out before the contract ends.

Who it is for

This is written for these electrical contractors.

  • Licensed contractors for residential and apartment projects
  • Commercial and office fit-out electrical contractors
  • Industrial and factory electrical contractors
  • HT, substation and transformer installation contractors
  • Government and PWD enlisted electrical contractors
  • Electrical maintenance and AMC providers for apartments and buildings
  • Villa and home rewiring specialists
  • Solar, EV charger and DG set installation contractors

Before you decide

When this may not be the right fit.

  • You send few estimates and the owner knows each one, so a CRM would add data entry without showing anything new.
  • The accounts person does not talk to the estimator, so running bill fields would stay empty.
  • The supervisors will not use a phone app on site, so job notes would never reach the record.

Before you decide

Agree the work. Know how to judge it.

CRM for electrical contractors: use these checks to prepare, choose the scope, and review what changes.

Bring the right evidence

List the records your team uses and show how an enquiry becomes an order today. Bring examples of duplicate entries, missing owners, and reports that require manual correction.

Make the scope clear

Agree the stages, required fields, access roles, and integrations before configuring the system. Separate software subscriptions from setup, data work, and training.

Check the work in use

Ask the people who will use the CRM to complete a real handover and find the next action without help. Check that the management report can be traced back to individual records.

Know when to change course

If the process is unclear, buying a more complex CRM adds more places for confusion. Start with the minimum fields and rules the team can use consistently.

These are discussion points, not a fixed package. GullySales confirms the deliverables, responsibilities, fee, and term in writing after reading your brief and speaking with you.

Before we start

What to have ready before the work starts.

The records, access and decisions this work needs from electrical contractors. Anything missing is noted in the written scope, with who will supply it.

The estimate folder and contact files
Whatever you use now, however messy: paper estimates, a spreadsheet, a phone full of contacts, visiting cards in a drawer. Photographs and exports are fine. Without it, the CRM starts empty, and the first months cannot be compared with how you worked before.
Running bills and what is outstanding
A list from accounts of each client, the bill raised, the amount received and the date of the last payment. Without it, the sales view omits the money owed, and a call to a client about a new job cannot take account of an unpaid one.
A decision on who owns the CRM
Name the person who checks entries, chases gaps and keeps the stages tidy, and tell us how much of the week they can give. Without one, use fades within the first busy fortnight on site, and the record becomes unreliable again.
A list of who needs access
Names and roles of the owner, estimators, accounts, supervisors and any partner, with what each should see. Pricing and margins are sensitive. Without it, everyone sees everything, and a supervisor who leaves takes a full copy of the order book in their head.

How it works

How the CRM work runs

The work itself, in order. How an engagement starts, from your brief to a written scope, is set out on our method page.

  1. 1

    Walk one estimate from BOQ to last bill

    We follow a recent job through its whole path with the estimator and the accounts person: the BOQ, the estimate, the revisions, the order, the running bills and the payment. You tell us where information is lost, such as a revised rate known only in one head. Those breaks decide the stages the record must hold, and the order in which they appear.

  2. 2

    Clean the contact list from your files

    We gather contacts from phones, cards and estimate files into one list of companies and people, remove duplicates and mark who knows whom in your firm. You review the result. A company with several people is one record with several contacts.

  3. 3

    Set the estimate stages as you quote

    We build stages that match how your firm quotes: BOQ received, estimate sent, revised, negotiating, won, lost. Each estimate carries its value, source and next call. The estimator tests the stages on live jobs and tells us what is missing.

  4. 4

    Link running bills beside the sales record

    We add the running bills and what is outstanding to the same record, so a call about a new job takes account of an unpaid one. You decide who in accounts enters them. The view shows how much of your work rests on one client.

  5. 5

    Train the office and the supervisors

    A short session at the office shows how to enter an estimate, set a next call and write a loss reason, using real jobs from the folder. Supervisors learn only the few fields they need from site, such as the work done and the bill raised. We watch the first entries made on the supervisors' phones and correct what confuses them. You name who checks entries, so a supervisor who skips a field is asked about it the same week.

Where this fits

Three pieces of sales work, in this order.

This work sits inside sales management. A target, a review routine and someone who owns the number.

  1. Step 1

    Sales audit

    Find where deals are being lost and what to fix first.

    Start here if you cannot say where orders are lost.

  2. Step 2

    Sales process design

    One written way to sell, from first enquiry to repeat order.

    Start here if every salesperson sells differently.

  3. Step 3 · you are here

    Sales management

    A target, a review routine and someone who owns the number.

    Start here if the team has targets and no routine.

Tell us what you need Your brief is read before we call. Scope, fee and term in writing.

FAQ

Questions owners ask before they call.

Not here? More answers, or ask on WhatsApp.

Which CRM suits a contractor of our size?
One that your team will open daily. A simple tool such as Zoho CRM, or even a well-built sheet for a small firm, beats a large system nobody updates. GullySales recommends after seeing how many people quote and who chases bills.
Can the CRM show our outstanding running bills?
It can hold the bill status beside each builder, entered from your accounts. It does not replace your accounting software; it lets the person calling a builder see what is pending before they dial.
Who should own the CRM in our firm?
One named person, such as the estimator or the office manager, who checks that every open estimate has a next-call date. Without an owner the list drifts, whatever tool you choose.
Should site supervisors have access to the CRM?
Give supervisors a narrow view: the site, the contact on site, the open snags and the next visit. Estimate values and rates stay with the owner and estimator. A supervisor who can enter a snag from site saves a call to the office and a lost note.
Should the CRM show the margin on each job?
Only to the owner and the person who prices. Margins are sensitive, and a supervisor or junior estimator does not need them. We set access by role so the figures are hidden from those who do not need them. Decide who sees what before the system is built, and check your own policy on keeping commercial records.
Can the CRM replace our accounts software?
No. Accounts software stays where bills and payments are kept. The CRM holds the sales side and a view of what is owed so a call is informed. We connect only what is needed and avoid typing the same figure twice. Your accountant decides which figures move between them.
How much does it cost?
There is no price list, because the work differs by business. The fee is scoped after we have read your brief and spoken to you, and put in writing before anything starts, split into our time, your media spend and production.
How soon will we see results?
It depends on the trade, the channel and what is already in place. After we have read your brief and spoken to you, we say what we would expect to move first and how it will be measured against the baseline. Nothing here is guaranteed.
Who will actually do the work?
The person you speak to before anything starts. We work from one office in Nagarbhavi, Bengaluru, with no account managers in between.
What if we are not happy with the work?
Tell us and the plan changes. Everything is reported against the baseline, so a number that is not moving is visible to both sides. The term is in your written scope, and the refund and cancellation policy sets out the rest.

Your next practical step

Tell us what you are trying to grow, and we will read it before we call.

Eight short steps, mostly taps. Skip anything you would rather answer on the call.