Skip to content
GullySales

Electrical contractors · Follow up systems

An estimate sent and never chased is a rate you gave away for nothing.

A follow-up system for an electrical contractor is the set of dated calls and messages that goes with every BOQ, estimate, running bill and completed job. GullySales writes the schedule, the call scripts and the record of outcomes so a lost job teaches you something.

Scope, fee, reporting and term are agreed in writing after we have read your brief and spoken to you.

Realistic editorial illustration of electrical contractors at work in India

What follow up systems means

A follow-up system is the set routine for calling, messaging or emailing an enquiry more than once, since most buyers do not decide on the first conversation. GullySales sets the number and timing of follow-ups so an undecided buyer keeps hearing from you until they decide either way.

Last updated 14 Nov 2026.

For electrical contractors

Where it usually goes wrong, and what we would do.

  • “Two evenings of pricing, then silence”

    An estimator spends days on a BOQ, sends the file and returns to the next one. Nobody asks whether it was opened or compared. The first time the firm hears the result is when another contractor's van arrives at the site.

  • “The call after the estimate is a question, not a nudge”

    A good follow-up asks whether the rate, the make of the switchgear or the schedule is the sticking point. The answer tells you what to change next time. A call that only asks if they have decided gets a polite no.

  • “Payment chasing is also follow-up”

    A stage finishes, the measurement goes in, and the certificate waits. The person who should ask may be the site engineer, who is uneasy raising money. A set routine takes the awkwardness out of it.

  • “After the handover the builder forgets you”

    A project closes with a thank-you or with silence. The builder's next tower is quoted to whoever called most recently. A call after handover, and another when the next project is announced, keeps your name near the BOQ.

What we do

What we deliver for electrical contractors.

The work available for this need. We agree the deliverables and responsibilities for your engagement in writing.

  1. A follow-up schedule for every estimate

    A fixed sequence of calls and messages that starts the day the estimate goes out, with the person responsible named for each step.

    Result: Every estimate has someone due to ask about it.

  2. Call scripts built around the likely objection

    Short scripts for asking about rate, brand, schedule and licence class, written in the language your estimator already uses.

    Result: The caller learns the reason instead of hearing a vague no.

  3. A lost-job record

    A short entry for each lost job covering who decided, what they said and what the winner offered.

    Result: Patterns in your losses appear on the page.

  4. A running-bill routine

    Steps for submitting the measurement, confirming receipt, asking for the certificate and raising a delay with the right person.

    Result: Payment delays reach a named person early.

  5. Post-handover contact plan

    A short call after completion and a reminder when the builder launches the next project, entered against the builder's record.

    Result: You are remembered at the next BOQ.

  6. Review sheet for open estimates

    A one-page list of open estimates, the next action and the owner, for the partners to go through.

    Result: Nothing stays open without a reason.

How the result is measured

  • Follow-up completion rate
  • Average number of follow-ups before close
  • Enquiries closed after repeat follow-up

Recorded as a baseline before work starts, so every later report has an honest comparison.

What to capture or send

The moments after an estimate where a message or call belongs, and what each says.

Covering mail with the estimate
Send the project record and licence class with the estimate, and name the date you will call. The mail is the first follow-up and sets the next.
Call to the consultant after submission
Ask whether the estimate matches the specification and whether any clarification is needed. A question gets an answer where a nudge gets silence.
Clarification on the make list
Record which makes the consultant approved. If the list changed, send a revised rate rather than waiting to be asked.
Note after a lost estimate
Thank the builder, ask what decided it and record the answer. The reason is the only thing that makes the next estimate better.
Running bill reminder
Send the measurement sheet and the certified quantity with the bill. A reminder that attaches the measurement gives the builder nothing to query.
Contact after handover
A visit or call to see how the panel room is running. The builder who remembers you at handover sends the next BOQ.

Who it is for

This is written for these electrical contractors.

  • Licensed contractors for residential and apartment projects
  • Commercial and office fit-out electrical contractors
  • Industrial and factory electrical contractors
  • HT, substation and transformer installation contractors
  • Government and PWD enlisted electrical contractors
  • Electrical maintenance and AMC providers for apartments and buildings
  • Villa and home rewiring specialists
  • Solar, EV charger and DG set installation contractors

Before you decide

When this may not be the right fit.

  • You have not recorded which estimates are open, so a schedule would chase jobs that were lost or won long ago.
  • The estimator is on site most days, so a call script would be dropped the moment a tender closes.
  • You are unwilling to ask a builder for payment on a running bill, so a payment routine would be written and never used.

Before you decide

Agree the work. Know how to judge it.

Follow-up systems for electrical contractors: use these checks to prepare, choose the scope, and review what changes.

Bring the right evidence

Trace recent enquiries from arrival to the last recorded action. Include a won enquiry, an unsuitable one, and one that went quiet, with personal details removed for the initial discussion.

Make the scope clear

Agree who accepts each enquiry, what makes it qualified, and how ownership changes. Include a rule for missed replies and a clear reason for closing an enquiry.

Check the work in use

Pick an enquiry at random and ask the team to find its owner, latest conversation, and next action. Check that the record agrees with what actually happened.

Know when to change course

If no one has capacity to respond, assign that responsibility before buying more leads. Automation can support the owner, but it cannot replace an unresolved handover.

These are discussion points, not a fixed package. GullySales confirms the deliverables, responsibilities, fee, and term in writing after reading your brief and speaking with you.

Before we start

What to have ready before the work starts.

The records, access and decisions this work needs from electrical contractors. Anything missing is noted in the written scope, with who will supply it.

The list of open estimates
Every estimate still alive, with the client, value, date sent and last contact. Paper or file is fine. Without it, we cannot begin, and the first sitting is spent reconstructing which estimates are still worth a call.
A person to make the calls
The estimator or the owner, with the hours they are at a desk and not on site. Name a second person for leave. Without one, dates pass, and a call that should have been made on the day is made weeks later or not at all.
Your payment terms with each client
What was agreed on advance, running bills and retention, in writing if possible. Without it, the routine cannot say what is overdue, and a reminder to a client may quote a term that the client never accepted.
Your view of difficult clients
Tell us which clients you handle differently, because they pay late, change scope or squeeze rates, and what has worked with them. Without it, the scripts treat all clients alike, and a standard reminder lands badly with the one who has been treated gently for years.

How it works

How the follow up systems work runs

The work itself, in order. How an engagement starts, from your brief to a written scope, is set out on our method page.

  1. 1

    Count the estimates that never got a second call

    We go through your estimate folder and mark each estimate that was sent and not followed up. You recall why for a few. The count of silent estimates shows how much work was half-won, and where the follow-up fails.

  2. 2

    Write a call date into every open estimate

    For each open estimate we set the next call date, the person who makes it and the question to ask, such as whether the consultant has shortlisted the firm or is waiting on a revised make list. The call after an estimate is a question, not a nudge, and the wording shows it. You approve the questions and strike any that sound like pressure on a buyer who has not decided.

  3. 3

    Draft the scripts around the likely objection

    For each type of buyer we write the likely objection, a rate that looks high, a make that was changed, a delay in the programme, and a short reply the estimator can adapt. You edit them into your own voice, because a script read aloud is heard at once. The scripts are starting points that the estimator marks up after each real call, and we keep the versions that work.

  4. 4

    Set up the running-bill routine

    Payment chasing is also follow-up. We write the steps from the first reminder to a call from the owner, with the wording for each, and a note of which clients are to be phoned before they are written to, because a written reminder to an old client can seem cold. You decide where the line falls. The routine keeps the relationship in view.

  5. 5

    Read the lost-job record against the start

    Before the work we counted estimates sent, won, lost and silent. We now read the lost-job reasons with you and see whether follow-up recovered any. You decide which scripts to change.

Where this fits

Three pieces of sales work, in this order.

This work sits inside sales process design, at stage 2, qualification. The audit comes before it, and sales management keeps it running.

  1. Step 1

    Sales audit

    Find where deals are being lost and what to fix first.

    Start here if you cannot say where orders are lost.

  2. Step 2 · you are here

    Sales process design

    One written way to sell, from first enquiry to repeat order.

    Start here if every salesperson sells differently.

  3. Step 3

    Sales management

    A target, a review routine and someone who owns the number.

    Start here if the team has targets and no routine.

Tell us what you need Your brief is read before we call. Scope, fee and term in writing.

FAQ

Questions owners ask before they call.

Not here? More answers, or ask on WhatsApp.

How often should we call after sending an estimate?
It depends on the size of the job and how the buyer behaves. GullySales sets the spacing together with your estimator, based on how your own past orders moved, and records the outcome of each call.
Is chasing a builder for payment bad for the relationship?
A calm, scheduled request with the measurement reference is routine for a builder's accounts team. What damages the relationship is a sudden angry call after months of silence. The routine makes the first kind normal.
Can follow-up be automated on WhatsApp?
Reminders to your own team can be, and a standard message to a builder can be sent from a template. A negotiation needs a person. Read the platform's current rules before any bulk send.
What do we send when a consultant asks to revise the make list?
Send a revised rate on the new makes, with the old rate beside it so the change is visible. The consultant decides makes, so argue the difference in cost, not the choice. Keep both versions on the estimate record, because a later tender may reuse them.
What should we send when a consultant revises the make list?
Reply with a revised estimate that shows what changed, make by make, so the consultant can compare. Do not argue the change. Note the revision in the log with the date. If the new make alters the price a great deal, call first. We include a short template for this reply and you decide what the estimator may agree.
How do we follow up after the handover?
Call the builder or facility manager after the job is in use to ask whether anything needs attention, and record the answer. It keeps you in mind when the next BOQ goes out, and finds small faults before they become complaints. We write a short call guide, and you name who makes the call.
How much does it cost?
There is no price list, because the work differs by business. The fee is scoped after we have read your brief and spoken to you, and put in writing before anything starts, split into our time, your media spend and production.
How long is the contract?
The term is agreed in writing after we have spoken, along with the fee and the reporting. It is never a default twelve months, and renewal is decided on the numbers against the baseline recorded at the start.
How soon will we see results?
It depends on the trade, the channel and what is already in place. After we have read your brief and spoken to you, we say what we would expect to move first and how it will be measured against the baseline. Nothing here is guaranteed.
Who will actually do the work?
The person you speak to before anything starts. We work from one office in Nagarbhavi, Bengaluru, with no account managers in between.

Your next practical step

Tell us what you are trying to grow, and we will read it before we call.

Eight short steps, mostly taps. Skip anything you would rather answer on the call.