Skip to content
GullySales

Ironing services · CRM

Keep every flat, floor and office account in one place instead of in the boy's memory.

A CRM for an ironing service is a simple record of who sends clothes, from which building, on which days and at what rate. GullySales works on setting up that record and the habits around it so the route survives a change of delivery boy.

Scope, fee, reporting and term are agreed in writing after we have read your brief and spoken to you.

Laundry staff press garments beside washing machines and clothing racks

What CRM means

A CRM is the record where every enquiry, call and quote is kept against a customer, replacing separate notebooks, spreadsheets and memory. GullySales sets up or cleans an existing CRM and reports from it by enquiry outcome rather than by activity logged.

Last updated 14 Nov 2026.

For ironing services

Where it usually goes wrong, and what we would do.

  • “The route lives in one person's head”

    The boy knows which flat is on the third floor and who prefers evening return. When the boy leaves, the shop loses the route and has to rebuild it from scratch.

  • “Standing customers and one-off customers need different handling”

    A household that sends clothes every morning needs a reminder only when the bundle is late. A one-off needs a follow-up message. A single sheet that mixes them hides who is slipping away.

  • “Disputes need a record to settle them”

    When a resident disputes a count, the shop needs to show what was written at collection. A saved count by flat turns an argument into a check.

  • “A simple tool beats a grand system”

    A shop with a few hundred households does not need enterprise software. A shared sheet or a basic contact tool that the whole team actually opens is worth more than a package no one uses.

What we do

What we deliver for ironing services.

The work available for this need. We agree the deliverables and responsibilities for your engagement in writing.

  1. A customer record built for the route

    Columns for building, flat, contact, pickup days, rate, special care and last bundle date, set up in a sheet or a simple tool.

    Result: Every customer is findable by building and flat.

  2. A building-wise view of the route

    A view that groups customers by block and floor, so a round can be planned and a gap spotted.

    Result: You can see which buildings are strong and which are thin.

  3. A bundle log with the count

    An entry method for count out and count back, linked to the customer record.

    Result: A disputed count can be checked against what was logged.

  4. Tags for customer status

    Labels such as new, standing, paused and lapsed, with a rule for when a customer moves between them.

    Result: Lapsed customers are visible before they are forgotten.

  5. A routine for updating the record

    A short routine for the boy and the owner at the end of each round, with who adds what.

    Result: The record stays current because someone owns it.

How the result is measured

  • Enquiries logged in the CRM
  • Data completeness
  • Reports generated from CRM data

Recorded as a baseline before work starts, so every later report has an honest comparison.

Fields worth keeping

Fields a press route needs, and who fills each one.

Flat and building
The boy fills it at the first pickup. It lets you sort the route by block, plan the cart trip and see which buildings have several households.
Pieces out and pieces back
The boy writes both counts on the slip and the sheet. This is what settles a dispute, and it shows the resident the shop keeps records.
Fabric or special care note
The owner or boy records silk, starch or a delicate piece at pickup. It prevents the same scorch from happening twice and shows the customer the shop remembered.
Standing or one-off
The owner marks it after the second bundle. It tells you whom to message when a regular goes quiet and whom to leave alone.
Pickup day and gate
The boy notes the day the resident prefers and the gate used. It lets a new boy cover the route without calling the owner for each flat.

Who it is for

This is written for these ironing services.

  • Roadside and gate-side press operators with a cart
  • Steam press shops with a collection and delivery boy
  • Ironing counters inside dry cleaners and laundries
  • Doorstep ironing operators serving gated communities
  • Shirt and uniform pressing for offices, showrooms and clinics
  • School uniform pressing before term starts
  • Saree rolling, pleating and starching specialists
  • Ironing franchise kiosks in malls and tech parks

Before you decide

When this may not be the right fit.

  • You have fewer customers than you can remember by name, and a sheet would be extra work with nothing to decide from it.
  • Nobody in the shop can update the record after the last delivery, so it would be wrong within a week and then ignored.
  • The delivery boy does not use a smartphone, and until another way to capture the count exists, the record would be filled in from memory.

Before you decide

Agree the work. Know how to judge it.

CRM for ironing services: use these checks to prepare, choose the scope, and review what changes.

Bring the right evidence

List the records your team uses and show how an enquiry becomes an order today. Bring examples of duplicate entries, missing owners, and reports that require manual correction.

Make the scope clear

Agree the stages, required fields, access roles, and integrations before configuring the system. Separate software subscriptions from setup, data work, and training.

Check the work in use

Ask the people who will use the CRM to complete a real handover and find the next action without help. Check that the management report can be traced back to individual records.

Know when to change course

If the process is unclear, buying a more complex CRM adds more places for confusion. Start with the minimum fields and rules the team can use consistently.

These are discussion points, not a fixed package. GullySales confirms the deliverables, responsibilities, fee, and term in writing after reading your brief and speaking with you.

Before we start

What to have ready before the work starts.

The records, access and decisions this work needs from ironing services. Anything missing is noted in the written scope, with who will supply it.

The old route book or notebook
Bring whatever the delivery person uses now. We move it to the new record. If it is on loose slips, collect them first. Bring also the loose slips with flat numbers, since they hold the customers who never made it into the book.
Customers' consent to hold their details
Customers' phone numbers and addresses are theirs. Decide how you tell them the shop keeps these and for what. Without a simple note, the record holds data the customer did not expect. A short notice on the counter, saying what is kept and why, is enough to begin with.
A device for the delivery person to use
A phone with a clean screen and a charged battery is enough. If the delivery person has none, a printed sheet is used and updated at the counter. If the phone is shared, decide who may open the sheet on it.
A rule on who edits the record
Decide who may change a status or a rate. Without a rule, entries differ and disputes return. Write the rule on a card kept at the counter, so it is followed when the owner is away.
Time to enter the first customers
The first entries take time. Set aside a slow hour. If it is rushed, the record starts with gaps. Choose an hour when the press is idle and the counter is quiet, since interruptions turn entries into guesses.

How it works

How the CRM work runs

The work itself, in order. How an engagement starts, from your brief to a written scope, is set out on our method page.

  1. 1

    Walk the route and note who sends what

    We walk the route with the delivery person and write down each stop: the customer, the building, the flat, the usual day and what is sent. You correct the list. This is the first draft of the record, taken from the ground and not from software. We also mark the customers who pay on delivery and the ones who settle later, since the record must show who owes.

  2. 2

    Decide the few columns the record needs

    We agree the fields: name, building, flat, phone, day, rate, status. You cut any that nobody will fill. A simple sheet kept current beats a grand tool left empty, so we begin with the smallest useful record. We also decide how a household with two phone numbers is entered, so that one customer does not become two lines.

  3. 3

    Build the building-wise view

    We arrange the sheet so the route can be read building by building, with the standing customers marked apart from one-off ones. The delivery person reads it on a phone at the gate. You test it on a day's route and tell us what is missing.

  4. 4

    Add the bundle log with the count

    We add a simple log: date, count out, count back, any note on an item. It settles disputes. You decide who writes it and when. A log that is filled in only after trouble is of little use. We also record what the delivery person is to do when a count differs, such as calling the customer before leaving the bundle.

  5. 5

    Train the counter staff on real entries

    We sit with the delivery person and the counter staff and enter real customers from their own route. They update a status and a count. You set which users can change records and which can only view. We also practise the awkward cases: a customer who changes flat, a pause for a holiday, and a bundle with an item left behind.

  6. 6

    Read the record against the route book

    After the switch, we compare the record with the figures noted before: customers on the route, standing and one-off, and customers who paused. You decide what to change in the columns or the habit. We also go through the three oldest entries together, to see whether anything has been left blank that the route needs.

Where this fits

Three pieces of sales work, in this order.

This work sits inside sales management. A target, a review routine and someone who owns the number.

  1. Step 1

    Sales audit

    Find where deals are being lost and what to fix first.

    Start here if you cannot say where orders are lost.

  2. Step 2

    Sales process design

    One written way to sell, from first enquiry to repeat order.

    Start here if every salesperson sells differently.

  3. Step 3 · you are here

    Sales management

    A target, a review routine and someone who owns the number.

    Start here if the team has targets and no routine.

Tell us what you need Your brief is read before we call. Scope, fee and term in writing.

FAQ

Questions owners ask before they call.

Not here? More answers, or ask on WhatsApp.

Do we need paid software?
Not at the start. A shared sheet, kept tidy by one named person, is enough for a small route. Move to a dedicated tool only when the sheet becomes hard to search or share.
Will the delivery boy use it?
Only if it is quick on a phone. We keep the entries to a few fields so the boy can fill them in at the gate. A long form will be skipped.
Is customer data safe in a sheet?
Keep the sheet limited to people who need it, protect access with a password and avoid storing more than the shop needs. Check your own adviser on data handling for your business.
Should we record customers' phone numbers and addresses?
Record only what the route needs: the flat, the building and the contact number the resident gave for pickups. Limit access to the people who need it and keep it off public sheets. Customers share their address on trust, so ask for nothing more than delivery requires.
What goes in the bundle log?
The date, the count handed over, the count returned and a note on any item that was damaged or missing. Add the customer's name or flat. The log should take a moment to fill in. If the count at return differs from the count at collection, the note is made on the spot, and the customer is told. Where the count is disputed, the log is the record both sides can read.
Who may edit the record?
The owner and the person at the counter may edit anything. The delivery person may add a count and a note, but not change rates. Keep the sheet on a shared account the shop controls, so it stays with the shop if someone leaves. We set up the access with you and write it down.
How much does it cost?
There is no price list, because the work differs by business. The fee is scoped after we have read your brief and spoken to you, and put in writing before anything starts, split into our time, your media spend and production.
How long is the contract?
The term is agreed in writing after we have spoken, along with the fee and the reporting. It is never a default twelve months, and renewal is decided on the numbers against the baseline recorded at the start.
How soon will we see results?
It depends on the trade, the channel and what is already in place. After we have read your brief and spoken to you, we say what we would expect to move first and how it will be measured against the baseline. Nothing here is guaranteed.
Who will actually do the work?
The person you speak to before anything starts. We work from one office in Nagarbhavi, Bengaluru, with no account managers in between.

Your next practical step

Tell us what you are trying to grow, and we will read it before we call.

Eight short steps, mostly taps. Skip anything you would rather answer on the call.